For Dream Maker Spas. We sell additional Dream Maker Spa parts. Please send message with any questions / inquiries. The item “DREAM MAKER SPAS CLEAR FILTER GRATE Brand New” is in sale since Monday, October 19, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “insideoutimpressions” and is located in Tampa Bay, FL. This item can be shipped to United States.
New, but not in original box. Comes with the cover. Watkins part # 1181801. I believe it is 2009 and newer compatibility – but please verify. The item “HotSpring Spa IQ2020 Control Box with cover” is in sale since Saturday, October 24, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tempacontrol” and is located in Omaha, Nebraska. This item can be shipped to United States.
Sundance Spas Flow Switch 6560-860. Sundance Spas Flow Switch with Bypass. This flow switch is for all Sundance Spas from (June) 1999 – Present with 2 or 3 Pump Systems. Sundance Spas Flow Switch with transparent tee. 3/4 inch barb with a 3/8 inch barb off the side. 3/4 inch barbed replaces part #6560-858. Used on the following spa models. Sundance 800/850/880 seriies, 1999 to present. Sweetwater and Portifino Series Spas/Hot Tubs with circulation pump. Troubleshooting: A defective flow switch will cause a flashing’flo’ or solide’flo’ on the control panel icon. Solid’flo’ is a bad flow switch. Flashing’flo’ could be flow switch, circulation pump (clogged or defective) or dirty filter. If you have any questions, please let us know we would be happy to help. _gsrx_vers_526 GS 6.6.6 (526). The item “Sundance Spas Flow Switch 6560-860″ is in sale since Tuesday, July 07, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “clearviewhome” and is located in Oswego, New York. This item can be shipped to United States.
Intex PureSpa Inflatable Brown Bench 28508E. For Intex Spa 28421E 28422E 28423E 28424E. The PureSpa inflatable bench is the perfect place to lounge and relax when sitting by the spa. Made with the same color scheme and a contoured shape to fit around the spa; Removable for convenience. Attaches and locks into place. Made with laminated material. Dimensions: 76″ Long x 27″ Wide x 13.5 High. For use with Intex PureSpa models 28421E, 28422E, 28423E and 28424E. The PureSpa inflatable bench is the perfect place to lounge and relax when sitting by the Spa. Made with the same color scheme and a contoured shape to fit around the spa. No Po Boxes, Apos or Fpos. Item must be brand new still sealed not opened. IMPORTANT INFO PLEASE READ CAREFULLY. The item “Intex PureSpa Inflatable Bench 28508E for Intex Spa 28421E 28422E 28423E 28424E” is in sale since Tuesday, January 20, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “grrrreightoutdoors” and is located in OUR PA WAREHOUSE. This item can be shipped to United States.
We have access to over 10,000 pool and spa parts visit us online & Find what you need! Compact Series Whirlpool Bath Heater. Comes with 3/4″, 1″ & 1.5 PVC Tail Piece Unions. 1.9 stainless housing. 7 flange to flange length. 3 Foot power Cord. 120V, 1.0kW/1000 Watts. Best up to 100 Gallon bath. Smart Thermostat – Insures heating element operates only when the water temperature drops below 102.5°F. Provides constant, comfortable water temperature. Certified Real HeatT Technology – 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent High Limit Switch – The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety. Heater “On” Light – Provides a visual indicator that the heater is operating and raising the temperature of the water. 100% Quality Assurance – Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in America – Manufactured in Corona, California by a dedicated group of quality minded men and women. This unit installs on the Pressure Side , heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own GFCI outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! Items unpaid in 7 days will received a friendly “Unpaid Item” reminder, items not paid for in 14 days will result in an Unpaid item Claim filing. If you need your part Faster? If an item is damaged in transit please notify the courier which delivered it and them notify us. Add me to your Favorite Sellers. The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Friday, October 23, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Japan, to Australia.
EcoSmart 220-Volt Electric Spa Heater. Ecosmart Spa Heaters operate by utilizing the latest flow sensor technology instead of the traditional pressure switch activation and contactors to reduce the risk of burned elements, which increases functionality and reliability. The Smart SPA Series comes with a digital thermostat control so you can set the temperature exactly where you want. Ecosmart Spa Heaters are compact and easy to install for a new system or to replace any existing spa heater, including Hayward and Ray-Pak. Order contains 1 unit. Equivalent BTU’s: 37,560. Required Breaker: 60 Amps DP. Required Wire: 6 AWG. Conduit Size: 1 Inch. Pipe Fittings: 1.5 Inch. Temperature Rise per Hour: 5°F – 25°F. Max Temperature Settings: 104°F. Weight: 14.25 Pounds. Dimensions: 12in H x 10.5in W x 4.75in D. Thank You For Looking! Check Out Our Other. Thank you for your business! We strive for a perfect 5 Stars in our Detailed Sellers Ratings! These will be charged to you upon arrival. You will be provided with complete tracking from our store to you. See GSP terms & conditions. If you choose to return your product, you can arrange for this within 14 days of receiving it. Once the item has been received and inspected your return will be processed and completed. We will request photos of the damage to expedite the process. The item “EcoSmart SPA11 Smart Spa 11 Electric Spa Heater Flow Sensor Technology” is in sale since Thursday, August 14, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “greatbrands” and is located in Jamestown, Tennessee. This item can be shipped to United States.
15″ Heater, 4000 watts, Digital Topside Display/Keypad WITH New Waterway 2 speed spa pump 2″ Hi-Flo 10.5 AMPS, 1.0HP, 115 volt, 48 Frame 5.6 diameter motor. Control is 14″ wide x 12″ tall x 4.9 deep. 15.0 heater flange to flange. Control is blue, not black. This Smartouch Digital Control comes with 4.0kw 15 heater, Has a Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. For 4-wire 230 volts or for 115 volts. Listed for portable spa applications mounted behind the redwood skirt, not for use out in the rain, snow, etc. Will NOT work on old 3-wire 230 volts power source please note. Comes with a new power cord for your main 2-speed pump, with quick disconnect AMP plug to the control. You also get quick disconnect AMP plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 4000 watt (4.0kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The ePack Smartouch SMTD 1500 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.0kw or 1000 watts. From the factory the SMTD1500 is set for 230v 4-wire incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Comes with 2″ couplings on heater and a pair of 2″ unions for the pump. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 12″ tall, and 14″ wide, 4.9″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 28 years. Waterway Hi-Flo pump, with motor 1.0HP, 10.5 AMP, 115 volt 2 speed. 5.6 diameter motor, 48 frame size. Great pump 3.1 outside diameter threads, with union PVC union fittings, new. Smartouch Digital Control by ACC model SMTD1500 ePack. 15″ 4000 watt stainless steel heater with standard threaded couplings for 2″ PVC pipe size. Digital display keypad (topside) with 57 long cable. This topside display/keypad is 2.5×5.5 size. Pump 4 wire power cord 48 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual. Pair of Heater PVC Couplings. Pair of Pump Union Fittings. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Smooth top motors are not available presently. The item “Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW” is in sale since Saturday, October 24, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “warehouse_52″ and is located in California. This item can be shipped to United States.
Caldera Spa 75 New Style – 1019301. This listing is for (1) Pleatco PCD75N filter. Pleatco uses the highest quality raw materials to produce the best filter cartridges in the industry 35 years of research, engineering, product development and solid manufacturing Top quality filter media (Reemay) Anti-microbial crack resistant end caps. The highest resistance to chlorine in the industry Cores: Free Flow technology (approximately 20% more efficient). Less wear & tear on pump We spend more to build a better cartridge Made in the USA. BEST PRODUCTS AT THE BEST PRICE. For more information about Pleatco filters, check out their official website. Product Condition: BRAND NEW. We do NOT accept local pickups. Please include a copy of the invoice with a written explanation of the reason for returning. If your product has a rebate listed, we will provide you with all information you may need to complete the rebate request. Some manufacturers require you to submit the rebate form digitally. The item “PLEATCO PCD75N FOR CALDERA SPA 75 NEW 1019301 C-7375 FILTER C7375″ is in sale since Wednesday, October 05, 2011. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “a1_superdeals” and is located in Multiple Warehouses. This item can be shipped to United States.
This Smartouch Digital Control comes with 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 4000 watt (4kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16″ tall, and 15-3/8″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Friday, October 09, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazi_discounts” and is located in Azusa, California. This item can be shipped to United States.
