»
S
I
D
E
B
A
R
«
Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW
November 15th, 2015 by admin
Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW


Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW


Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW


Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW


Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW



15″ Heater, 4000 watts, Digital Topside Display/Keypad WITH New Waterway 2 speed spa pump 2″ Hi-Flo 10.5 AMPS, 1.0HP, 115 volt, 48 Frame 5.6 diameter motor. Control is 14″ wide x 12″ tall x 4.9 deep. 15.0 heater flange to flange. Control is blue, not black. This Smartouch Digital Control comes with 4.0kw 15 heater, Has a Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. For 4-wire 230 volts or for 115 volts. Listed for portable spa applications mounted behind the redwood skirt, not for use out in the rain, snow, etc. Will NOT work on old 3-wire 230 volts power source please note. Comes with a new power cord for your main 2-speed pump, with quick disconnect AMP plug to the control. You also get quick disconnect AMP plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 4000 watt (4.0kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The ePack Smartouch SMTD 1500 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.0kw or 1000 watts. From the factory the SMTD1500 is set for 230v 4-wire incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Comes with 2″ couplings on heater and a pair of 2″ unions for the pump. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 12″ tall, and 14″ wide, 4.9″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 28 years. Waterway Hi-Flo pump, with motor 1.0HP, 10.5 AMP, 115 volt 2 speed. 5.6 diameter motor, 48 frame size. Great pump 3.1 outside diameter threads, with union PVC union fittings, new. Smartouch Digital Control by ACC model SMTD1500 ePack. 15″ 4000 watt stainless steel heater with standard threaded couplings for 2″ PVC pipe size. Digital display keypad (topside) with 57 long cable. This topside display/keypad is 2.5×5.5 size. Pump 4 wire power cord 48 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual. Pair of Heater PVC Couplings. Pair of Pump Union Fittings. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Smooth top motors are not available presently. The item “Spa Control Hot Tub Heater Controller Pack ACC ePack & Hi-Flo 2speed pump NEW” is in sale since Thursday, November 12, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “warehouse_52″ and is located in California. This item can be shipped to United States.

Be Sociable, Share!

Comments are closed

»  Substance: WordPress   »  Style: Ahren Ahimsa