Lifemart 4 Person Plug and Play Spa Hot Tub. The SerenoT by Lifesmart SpasT is a 110v, 22-jet spa with a waterfall feature, multi-color underwater LED light, and capacity for four adults. With a powerful 1.0 HP pump, air control valve, and intuitive digital control panel, the jets can be adjusted for maximum relaxation. The included ozone water care system helps keep the water sparkling clean with fewer chemicals. Lifesmart Spas are energy efficient, so there is no need to turn the temperature down while not in use. Full foam insulation and included thermal locking cover will keep the heat in and the electric bill low, so you can enjoy your new spa for years to come. You can rest easy knowing that Lifesmart Spas are certified to the APSP 14 National Standard and the California Energy Commission (CEC) in accordance with California Law. Dimensions: 75″ x 75″ x 34. Water Capacity: 245 gallons. Dry Weight: 406 lbs. /Filled Weight: 3,171 lbs. 1.0 HP pump (1). Product will be delivered to curb at the end of Member’s driveway. Driver will offload your spa to the curb at the end of your driveway. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “iblv.enterprises” and is located in this country: US. This item can be shipped to United States.
Because these are built to order, please allow a few days to build and test. More info at: Spa Pumps And More. NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 12″Tx15″Wx5D approximately. Includes the 3.25×7.25″ large BACKLIT XP-2020 topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. For more information look at Spa Pumps And More. Their part number is ePack. Alternate part number is SMTD1500. Model: ePack SMTD 1500. Display: Digital Topside Keypad 3.25″ x 7.25″. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. More details at Spa Pumps And More. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
The Vita Spa low flow heater replacement. The original heaters are no longer being made, so this is an option to keep your Vita Spa working. Will fit Vita Spas with vertical low flow heaters. Mounts with the same as the original heater. Pressure switch not included (for display only). I have another listing for the heater with a pressure switch. A few models may need a short section of hose to accommodate the new heater, but it’s normally not needed. You can send a photo of the left side of your control box to determine what if anything needs to be adapted. It’s an easy fix, unlike most of the other more expensive options. Plus this version has a replaceable heating element so a much less expensive fix if it should go bad in the future. I can help with any troubleshooting or installation questions. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “lancerika” and is located in this country: US. This item can be shipped to United States.
