»
S
I
D
E
B
A
R
«
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Dec 30th, 2014 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


15 heater, large 3.25×7.25 digital topside display/keypad. This smartouch digital control comes with 15″ heater, large 3.25×7.25″ topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 gpm minimum. 2″ or 1-1/2″ pvc pipe size. This is not a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is not for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short ‘pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The smartouch smtd 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the smtd1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ pvc pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer. Message us first and we will reply. There is a spa control with a 12-1/2 long heater if you prefer a more compact unit. Takes an extra day or 2 please note. Message us, we will respond with exact leadtime and price. So do not order from this listing if you want 12-/12 heater, message us please. This control is for 4-wire 230v or for 115v. If you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s manual shows how to program changes into the control, but it is factory programmed, and tested by acc, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange. Designed, built and tested in the u. By acc, a rugged, proven, spa control, good tech support, good parts availability, made in california. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by applied computer controls. Acc has been building digital hot tub controls over 28 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch digital control by acc model smtd1000. 15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect amp plug and motor connectors. Air blower power cord, a short ‘pigtail’ with quick disconnect amp plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect amp plug, 18 gauge wire. Light pigtail with quick disconnect amp plug, 18 ga wire. Acc user’s manual – here is a link to view and download the manual. Be sure to add me to your.The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Saturday, November 29, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazilu123″ and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Dec 19th, 2014 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


New hot tub controller, with electric heater, by applied computer controls, acc model ‘epack’ smtd1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″tx14″wx4.5d approximately. The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The epack will run one main 2-speed pump. And an air blower on-off, or, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the model 2000, the smtd2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 gpm minimum, for 2″ or 1-1/2″ pvc pipe size. It is not for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. The distributors, dealers, or resellers. Heater warranties do not cover. Running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals. Being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Be sure to add me to your.The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Monday, November 10, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in California. This item can be shipped to United States.

  • Brand: ACC
  • Model: ePack
  • Country of Manufacture: United States
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Oct 19th, 2014 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


15 heater, large 3.25×7.25 digital topside display/keypad. Make us an offer ! This smartouch digital control comes with 15″ heater, large 3.25×7.25″ topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater.

Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 gpm minimum. 2″ or 1-1/2″ pvc pipe size.

This is not a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is not for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control.
You also get quick disconnect plugs and short ‘pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The smartouch smtd 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power.
Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the smtd1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard.

Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ pvc pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer. Message us first and we will reply. There is a spa control with a 12-1/2 long heater if you prefer a more compact unit.

Takes an extra day or 2 please note. Message us, we will respond with exact leadtime and price.

So do not order from this listing if you want 12-/12 heater, message us please. This control is for 4-wire 230v or for 115v. If you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime.

So message us if you want 3-wire, please. User’s manual shows how to program changes into the control, but it is factory programmed, and tested by acc, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange.

Designed, built and tested in the u. By acc, a rugged, proven, spa control, good tech support, good parts availability, made in california. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by applied computer controls. Acc has been building digital hot tub controls over 28 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch digital control by acc model smtd1000. 15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect amp plug and motor connectors. Air blower power cord, a short ‘pigtail’ with quick disconnect amp plug, 18/3 wire size, to splice to existing blower cord.

Ozonator cord, a short pigtail with quick disconnect amp plug, 18 gauge wire. Light pigtail with quick disconnect amp plug, 18 ga wire.

Acc user’s manual – here is a link to view and download the manual. Be sure to add me to your.The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Sunday, September 14, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazilu123″ and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty

SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Oct 14th, 2014 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


New hot tub controller, with electric heater, by applied computer controls, acc model ‘epack’ smtd1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″tx14″wx4.5d approximately. The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole.

For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Not refurbished, but all new! The epack will run one main 2-speed pump.

And an air blower on-off, or, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Incoming power 230v 4-wire (can be 115v). Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). If you need to control more than this, look at the model 2000, the smtd2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 gpm minimum, for 2″ or 1-1/2″ pvc pipe size. It is not for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. The distributors, dealers, or resellers. Heater warranties do not cover. Running with air in the system (dry-fire) and burning a heating element, as this is not a defect.

Pump warranties do not protect against seals. Being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Be sure to add me to your.

The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Sunday, September 14, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in California. This item can be shipped to United States.

  • Brand: ACC
  • Model: ePack
  • Country of Manufacture: United States
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
May 12th, 2014 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


15 heater, large 3.25×7.25 digital topside display/keypad. This smartouch digital control comes with 15″ heater, optional large 3.25×7.25″ topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. This large topside keypad is a $25 option but included in the price shown.

A smaller keypad of 2.5×5.5 is available, just ask. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control.
You also get quick disconnect plugs and short ‘pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts.

Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The smartouch smtd 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts.

From the factory the smtd1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ pvc pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note.

You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer. You can request this spa control with a 12-1/2 long heater if you prefer a more compact unit. Takes an extra day or 2 please note. This control is for 4-wire 230v or for 115v. If you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so and is $362 delivered. Message us first if you need this please. User’s manual shows how to program changes into the control, but it is factory programmed, and tested by acc, and ready to go as is.

Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange. Designed, built and tested in the u. By acc, a rugged, proven, spa control, good tech support, good parts availability, made in california.


Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by applied computer controls. Acc has been building digital hot tub controls over 28 years.

Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch digital control by acc model smtd1000.

15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect amp plug and motor connectors. Air blower power cord, a short ‘pigtail’ with quick disconnect amp plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect amp plug, 18 gauge wire.
Light pigtail with quick disconnect amp plug, 18 ga wire. Acc user’s manual – here is a link to view and download the manual. Be sure to add me to your.

The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Friday, April 11, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazilu123″ and is located in Azusa, California. This item can only be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty

SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
May 2nd, 2014 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


New hot tub controller, with electric heater, by applied computer controls, acc model ‘epack’ smtd1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″tx14″wx4.5d approximately.

The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Not refurbished, but all new! The epack will run one main 2-speed pump.

And an air blower on-off, or, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. If you need to control more than this, look at the model 2000, the smtd2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc.

The distributors, dealers, or resellers. Heater warranties do not cover. Running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals. Being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Be sure to add me to your. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Saturday, April 12, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”.
The seller is “distributors-fulfillment” and is located in California. This item can only be shipped to United States.

  • Brand: ACC
  • Model: ePack
  • Country of Manufacture: United States

SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Apr 6th, 2014 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


New hot tub controller, with electric heater, by applied computer controls, acc model ‘epack’ smtd1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″tx14″wx4.5d approximately.

The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole.

For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Not refurbished, but all new! The epack will run one main 2-speed pump. And an air blower on-off, or, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included.

If you need to control more than this, look at the model 2000, the smtd2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. The distributors, dealers, or resellers. Heater warranties do not cover.

Running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals. Being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Be sure to add me to your.The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Friday, March 21, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in California.
This item can only be shipped to United States.

  • Brand: ACC
  • Model: ePack
  • Country of Manufacture: United States

Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Feb 17th, 2014 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC



15 heater, large 3.25×7.25 digital topside display/keypad. This smartouch digital control comes with 15″ heater, optional large 3.25×7.25″ topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. This large topside keypad is a $25 option but included in the price shown. A smaller keypad of 2.5×5.5 is available, just ask. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc.

Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short ‘pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise.


This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The smartouch smtd 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v.

On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the smtd1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ pvc pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer.

You can request this spa control with a 12-1/2 long heater if you prefer a more compact unit. Takes an extra day or 2 please note. User’s manual shows how to program changes into the control, but it is factory programmed, and tested by acc, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange. Designed, built and tested in the u.

By acc, a rugged, proven, spa control, good tech support, good parts availability, made in california. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by applied computer controls. Acc has been building digital hot tub controls over 28 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch digital control by acc model smtd1000. 15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect amp plug and motor connectors. Air blower power cord, a short ‘pigtail’ with quick disconnect amp plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect amp plug, 18 gauge wire.

Light pigtail with quick disconnect amp plug, 18 ga wire. Acc user’s manual – here is a link to view and download the manual. Be sure to add me to your.

The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Thursday, January 09, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazilu123″ and is located in Azusa, California. This item can only be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty
»  Substance: WordPress   »  Style: Ahren Ahimsa