Transform any bath tub into a new. Jetted whirlpool tub, with this complete builder’s kit, in CHROME COLOR with 1.5kW in-line HEATER. Fiberglass, acrylic, plastic, cultured marble tubs. You can also convert steel and cast iron tubs. Motor single speed 115V/60Hz/7.5A with 4-ft cord & NEMA plug (3-prongs standard wall outlet). 10ft air-tubing (1/8ID). 1x Air Button Classic touch, color chrome , 1-3/8 hole size. 2x Pump union 1.5slip. 1x Tee 1.5″spg x 1″slip x 1slip. Air control valve on/off TruSeal. Color chrome, 1″slip socket, 1-11/16″ hole size. 1 x Waterway Hi-Flo Suction intake 1.5 VGB2008 rated up to 120GPM, color chrome. 6 x Jet Body assembly. 1/2″air x 1″water, hole size 1-3/4. 6x Wall fitting for bodyjets. 6x Eyeball 2-1/4 & escutcheon , color chrome. 1x Jet tool wrench. 1 x 1.5 In-line bath Heater 1500W/120V/12A with Nema plug. This is contractor kit, no instructions provided. Lot of videos on YouTube. It’s not just an expression with us. That’s the way Waterway products are made… And always have been. Not just good enough. Waterway SVC-2 V Hi Flo SUCTIONS assembly with Nut & Gasket. 1.5″ slip socket for 1.5″ pipe. 3″3/4″ inches diameter cover. Need 2″5/16″ hole required. Total Open Area: 4.01 sq. Virginia Graeme Baker Pool and Spa Safety Act VGB2008. UL ASME/ANSI A112.19.8. Please note that bodyjets do not have gaskets, silicon will seal the bodyjets. (50x36x24 cm — 10.5kg). Item location: Memphis, TN. + your local Postal services.
Hello you are purchasing 1 open box COAST ST-15 pool heater. The power has not been connected to this unit and you can see from the back of the panel the holes for connecting power were never pushed open. Please review all pictures explaining what must be done to connect power to this heater. It needs to be installed by someone with good knowledge of electrical wiring codes. This unit does not come with an cord attached that can just be plugged into a wall. This unit comes like all the others with out a plug wired to the unit. They all come this way from the manufacturing company. Let me know if you have any questions and I’ll do my best to answer them. This unit is 100% guaranteed. (Match with the power supply system in the US & Canada). Dimension: 450 x 355 x 105 MM. Net Weight: 8.5KG. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “stan_vp” and is located in this country: US. This item can be shipped to United States.
Listing is for a brand new 5.5kw spa heater element. Fits 99% of flo thru heaters. Element is 5.5kw using 240v or 1.5kw if using 110v. Element is 10.5 long. They are made that way and are to accomidate more heaters. They will work just fine to replace the straight elements. Terminals are 1 1/4 apart. Comes with all hardware and o-rings required for installation. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “poolsupplies1234″ and is located in this country: US.
> Shower Door Seals. > Shower Door Rollers. > Heads & Handsets. > Riser Rails & Hoses. > Shelf & Brackets. > Shower Body Jets. > Seats & Benches. > Drainage & Waste. > Fixtures & Fittings. > Speakers & Fans. > Shower Mixer Valves. > Bath Air & Water Jets. > Taps & Thermostats. > Bath Pipes & Fixtures. > Waste & Drainage. > Pumps & Sensors. > Sauna Bucket & Ladle. > Temperature & Timer. > Audio & Speakers. Part Number (SKU): SDP-1500T. This is a DXD SDP 1500 T replacement inline water heater for hot tubs, spas, swimming pools and whirlpool baths. If you have a DXD SDP 1500T water heater then replacing your broken heater with this o… See more product information below. If you have a DXD SDP 1500T water heater then replacing your broken heater with this one is a simple process. Technical Details for the DXD SDP 1500T Flow Water Heater Model : DXD SDP-1500 A Voltage : 220 Volts to 240 Volts AC Hertz : 50/60 Hz Power : 1.5KW Horse Power : 2 HP Plumbing Fitting Connector : There is a reducing fitting which screws into the existing fitting on the heater. The fitting which is a part of the heater is 62.5mm (2.457 inches). The reducer takes this down to a 40mm (1.575 inches) push fit female union tail piece connector. This heater should be used for a whirlpool bath, hot tub, spa and swimming pools. It is easy to install and easy to operate. The heater should be connected into the water circulation system within the unit that its being installed into. Make sure there is connection is tight and that there isn’t any water leaking from this connection. Once the connection has been made, before turning the unit on, make sure there is water in the hot tub, swimming pool etc. The temperature of the water will be controlled automatically. If you need to adjust the water temperature you can do this with the control panel which is on your hot tub (if it has this feature). The heaters’ power cable should be grounded and the main power should have a leakage protector installed. The heater cable should be fixed in a dry place to avoid electrical leakage. The DXD SDP 1500T flow water heater can be used on any hot tub or whirlpool bath as all it requires is a power source. Attached to the heater is a 1.5 meter power cable with a British plug at the end. If you don’t require a plug or are from a different nation and need a different plug, this can easily be cut off an rewired. Frequently Asked Questions Question: How does a hot tub heater work? Answer: The water heater is connected to the water circulation system of the hot tub, and is installed at a point between two pipes where water flows through the heater. As water is pumped around the hot tub spa, it will pass through the water heater which has a hot element in it which will heat the water as is passes through. This is why this type of heater is sometimes called a thru or a through water heater. Usage Warnings – The heater should not be turned on when there is no water present in the unit in which it’s being installed. Only professionally qualified personnel should open the body of the water heater. Electric shocks are a real risk and those who aren’t qualified should seek a professional. The heater needs to be grounded properly with a copper wire that is at least 1mm in thickness. The heater needs to be connected with the pipes of the water circulation system within the hot tub / spa / swimming pool, or connected to the inlet or outlet of the water circulation pump, making sure that the water is flowing in the direction indicated on the heater. The water heater needs to be installed horizontally and be fixed firmly. Use appropriate PVC glue to connect the pipe with the heater union connector to avoid future water leaks. When in operation, the unit will become very hot and therefore please don’t touch any metal parts of this unit while it is in operation. Any items that arrive faulty must be reported to our customer service team within 48 hours. If a direct replacement is not available, an alternative will be offered. The packaging for this item is a’medium parcel’. We will do our best to assist. Di Vapor takes great pride in providing unrivalled customer service combined with high quality products? Ensuring that you are satisfied whilst providing a positive shopping is our priority. We are confident that we will deliver beyond your expectations and that you? Ll be more than satisfied with your purchasing experience with Di Vapor. However, we also understand that sometimes mistakes can happen or delays out of our control can reflect badly on your shopping experience. We will do our absolute best to ensure that any issues are resolved quickly and efficiently. We are constantly striving to provide a reliable service and product range that our customers keep coming back for? POPULAR ITEMS YOU MAY ALSO LIKE. The item “DXD SDP 1500T 1.5kW Flow Water Heater for Hot Tub Spa Whirlpool Bath Pool” is in sale since Friday, February 16, 2018. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “divapor” and is located in Solihull. This item can be shipped worldwide.
Transform any bath tub into a new. Jetted whirlpool tub, with this complete builder’s kit, NOW WITH HEATER (acrylic and fiber glass tub). Waterway Genesis 3/4 HP bath pump 120V/7.5A , self draining, 1.5 in/outake. Motor single speed 115V/60Hz/7.5A with 4 -ft cord & NEMA plug (3-prongs standard wall fitting). 10ft air-tubing (1/8ID) and. Air Button #15 Classic touch , color white, 1-3/8 hole size. 2 x Pump unions 1.5″ + Tee 1″. 1 x Slimline 1″ Venturi control valve on/off TruSeal Teardrop handle (for air intake) color white, 1″slip socket, 1-11/16 hole size. 1 x Waterway Hi-Flo Suction intake 1.5 VGB2008. Rated up to 120GPM, color white. 6 x slimline 1 Complete Eye ball adjustable Jet assembly. 1″air x 1″water, color white. 1 x 1.5 In-line bath Heater 1500W/120V/12A with Nema plug. Low cost, high performance pumps for whirlpools. Aqua-flo by Gecko’s new WhirlMaster provides the high performance and flow rates necessary for today’s whirlpools in a very affordable package. WhirlMaster pumps are Aqua-Flo by Gecko’s smallest, most inexpensive jetted bath pump offering the same quality, reliability, and service at a greatly reduced cost. From the leading supplier of pumps for the Leisure Water Industry comes the new WhirlMaster series of low cost, high performance pumps whirlpools. More flow with less energy. The low profile compact design of the WhirlMaster is light weight and ideal for shallow tubs with limited space applications. Its quick release compression fittings allow for ease of installation and maintenance. WhirlMaster pumps provide 100% drainage. Quick release compression fittings allow for easy installation or maintenance. When you select Aqua-Flo by Gecko pumps, you are choosing maximum hydrotherapy performance, energy efficiency, innovative technology and exceptionnal quality and reliability. True, continuous rated horsepower of 1/2, 3/4, 1.0 & 1.5. 1 1/2 inlets and outlets. 15 frame size motor. Whisper quiet fine-tuned impellers. Highest quality materials in pump construction. Exceptional quality and reliability. UL & ULC approved. Sealed interconnection at the pump. It’s not just an expression with us. That’s the way Waterway products are made… And always have been. Not just good enough. Waterway SVC-2 V Hi Flo SUCTIONS assembly with Nut & Gasket. 1.5″ slip socket for 1.5″ pipe. 3″3/4″ inches diameter cover. Need 2″5/16″ hole required. Total Open Area: 4.01 sq. Virginia Graeme Baker Pool and Spa Safety Act VGB2008. UL ASME/ANSI A112.19.8. This is contractor style kit, no instructions provided. Item location: Las Vegas, NV. + your local Postal services. The item “WHIRLPOOL Conversion assembly white kit with in-line HEATER 1.5kW & Waterway pump” is in sale since Wednesday, January 16, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sleco69″ and is located in Las Vegas, Nevada. This item can be shipped worldwide.
COASTS WATER HEATER THERMOSTAT. (work perfectly in North America, Match with the power supply system in the US). Dimension: 450 x 355 x 105 MM. We send our products to you by. The item “COASTS WATER HEATER THERMOSTAT ST-15 for SWIMMING POOL POND & SPA HEATER @ 15KW” is in sale since Wednesday, April 5, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “estore329″ and is located in HK. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.
Hydro Quip has been providing the hot tub, spa and jetted bath industries with premium equipment systems since 1981. We have established an unmatched global reputation for superior quality, reliability and customer service. We design, manufacture, and private label custom equipment for OEMs. Our Distributor product line includes electronic and pneumatic controls, heaters and blowers. Service Centers rely on us for perfect retro-fit solutions for any spa ever made. We have the most comprehensive selection of controls and equipment in the leisure water industry. Hydro-Quip, the industry leader in hydrotherapy bath heating technology, introduces the. Pure Heat – Universal Series of in-line bath heaters. Certified Real Heat® technology. There are alternative technologies that claim to extract heat from the circulation pump or generate heat from turbulence in the water. The benefits of these technologies are minimal at best. Insist that your new jetted bathtub come equipped with a heater bearing the Certified Real Heat seal; then relax. Why do I need a bathtub heater? The magical elixir created by the combination of hot water and air swirling together is a truly self-indulgent treat. The physical and mental benefits of which are numerous. Unfortunately, millions of air bubbles entering the bath every second cools the water temperature very quickly. As a bather, you are required to either interrupt the pleasure of your bath to drain and replenish hot water or limit your bathing time. Neither option is very desirable. A jetted bathtub featuring a bath heater utilizing Certified Heat. Technology assures the water temperature will remain in your personal Comfort Zone. For as long as you desire. As the chart above illustrates, a jetted bathtub without a Certified Real Heat bath heater can cool to an uncomfortable level in as little as two minutes after jet activation. By contrast, the same bathtub with a Certified Real Heat bathtub heater allows you to enjoy the therapeutic benefits of hydro-massage for as long as you desire. Suitable for new installation or retrofit. A model for every jetted bath application. UL Standard 1795 compliant. # 8 AWG bonding wire. Fittings for installation, 1 or 1-1/2 PVC plumbing (101 series). Fittings for installation to 1-1/2 or 2 PVC plumbing (301 series). Field installation specific installation instructions. All models provide the 100% efficiency of Certified Real Heat technology. Alternative bath heating devices compare. For T shaped pressure side models, 240-volt models, or custom requests visit our web site. This heater is suitable for bathtub up to 100 gallons. To determine gallons measure in ft – length X width X depth (to overflow drain) X 7.5. Versatile Compact Sizes 7. Pressure & Vacuum Switch Activated. Heater On Indicator Light. Stainless Steel Heater Housing. Installation Kit Included (see below). Detailed Owners Manual & Installation Guide. Hydroquip Pure Heat in-line bath heather. Model: PH101-15UP // CT101-B (2-00-7512). Type: Pressure in-line style. Plumbing size: 1.5(40mm). 2x 1spigot tailpieces. 2x 1.5″ spigot tailpieces 2x 1.5″ ridged gasket 3′ cord with NEMA plug (3-prongs wall outlet). 3′ copper wire Pressure switch & Hi-Limit sensor. Item location: Las Vegas, NV. COMPLETE ORIGINAL OEM PRODUCT FROM HYDRO-QUIP DIRECTLY. Made in USA, Brand new objects. Weight: 1.5 lbs. Xpresspost 1-3 days, all trackables. Tracked packet USA 4-10 days, with tracking#. Xpresspost USA 3-5 days with tracking#. CanadaPost + your local Postal services. Tracked packet International – EMS – 4-14 days, with tracking#. The item “Hydroquip PURE HEAT bath heater in-line 1.5kw 120V with pressure switch & NEMAcord” is in sale since Thursday, December 1, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sleco69″ and is located in Las Vegas, Nevada. This item can be shipped worldwide.
WHIRLPOOL LX H15-RS1 1.5kw heater hot tub spa, swimming pool, pond. WHIRLPOOL LX H15-RS1 Heater from Mr Tubby Ltd (pictures show 3kw version but appearance and size of this 1.5kw version is identical) This heater is used in hot tub, bath and small pools and designed for continuous use with minimal pressure loss. The compact design enables installation where there is little space. The heater is made of plastic with a heating element made out of Incoloy 825, a high-alloy steel made for aggressive water. This is the 1.5kw version with an adjustable thermostat from 0 – 45 degrees C, overheating limit control of 60 degrees C and inbuilt flow switch. Water temperature can be controlled +/- 2 degrees C. Maximum woorking pressure – 1 Bar. Call if you need advice. AC220 – 240 VOLTS 50/60 HZ 1.5KW – 6.8 amps 1.5 PLUMBING CONNECTION (48.5mm). This excludes Northern / Southern Ireland, Scottish Highlands & Islands, Isle of Scilly, Isle of Man & any offshore destinations. Also worldwide courier available. Stockists for the LX range: EA350 TDA200 TDA75 JA50 JA75 JA35 DH1.0 LP300 WP300-II H30-R1 H30-R1 H30-RS1 AP900 AP800 STP100 STP300. The item “WHIRLPOOL LX H15-RS1 heater hot tub spa bath pool pond 1.5KW Chinese thermostat” is in sale since Wednesday, July 16, 2014. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “mr_tubby” and is located in Oswestry. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.
We have access to over 10,000 pool and spa parts visit us online & find what you need! Compact series whirlpool bath heater. Comes with 3/4″, 1″ & 1.5 pvc tail piece unions. 7 flange to flange length. 3 foot power cord. Best up to 100 gallon bath. Smart thermostat – insures heating element operates only when the water temperature drops below 102.5°f. Provides constant, comfortable water temperature. Certified real heatt technology – 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent high limit switch – the ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the intelligent high limit switch can be manually reset assuring you continued safety. Heater “on” light – provides a visual indicator that the heater is operating and raising the temperature of the water. 100% quality assurance – every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in america – manufactured in corona, california by a dedicated group of quality minded men and women. This unit installs on the. Heating the water before it enters the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own gfci outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! Items unpaid in 7 days will received a friendly “unpaid item” reminder, items not paid for in 14 days will result in an unpaid item claim filing. If you need your part faster? If an item is damaged in transit please notify the courier which delivered it and them notify us.The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.5kW 1500W PH101-15UV Vac” is in sale since Monday, December 22, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped to North, South, or Latin America and to all countries in Europe and to Japan and to Australia.
