This item is for OEM BALBOA WATER GROUP® ValueSystem (VS) SERIES. Replace your exising Balboa pak or other model pak. Can run 1 pump, 1 ozone and 1 light. Works with a system that already has a 120 volt pump and 120 volt ozone. If you are replacing an existing Balboa pak the following topside control part numbers are compatible and will work with this pak: VL200 (55123), VL240 (55080), VL260 (55081), VL401 (54665), VL403 (54664). Awesome easy to fit in those tight areas under spas. Most flexible plumbing install on the market today. Readily compatible with domestic 120 volt or 240 volt input voltages for ease of installation. Can easily be converted to 120 volt or 240 volt as required with jumper wire and dip switch bank control included. Heater will run 4KW at 240 volt or 1KW at 120 volt. Size 1.5″ x 10″. Next Generation of Entry Level Hot Tub Control Systems. The Value Series (VS) family of hot tub control systems were designed using Balboas patented M7 temperature and flow sensor technology and a new universal control platform. These features increase the reliability, ease of installation and serviceability of the control. Designed for Easy Installation and Service. The VS family is based on a common universal control platform, which increases feature flexibility while reducing installation and configuration problems. The VS family has exceptionally good feature flexibilities, so its performance is competitive with much higher-end products. The units incorporate Balboas patented M7 temperature probe technology, which eliminates the more failure prone pressure switches and simplifies the installation process by not having to drill additional holes in the spa. Flexible, High Reliability, Feature Rich. The systems have a plastic enclosure to eliminate water intrusion. Connectors are built on to the circuit board minimizing wires and simplifying service. The different models have controls for a single two-speed pump or an additional blower or pump. All models featurea convertible power supply that can be wired for 120 or 240 volts, a 1.0, 1.5, 4.0, or 5.5 Kw heater and support mini, duplex or standard digital panels. Balboa WG® spa pack VS100 control box spa pack, PN 56473. 4kW (1kW at 120V) Heater assembly PN58203, with M7 sensors & AMP cord, size 1.5″ x 10″. Electrical input: 120/240V 30A max 50-60Hz (required 40A GFCI). Please note that the pump and ozone generator, must be on the same voltage. COMPLETE OEM PRODUCT FROM BALBOA WATER GROUP®. Never use or try. Xpresspost 1-3 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4days with tracking#. CanadaPost + your local Postal services. XpressPost International – EMS – 4-10 days, with tracking#. The item “Balboa complete spa pack VS100, with 1.5size heater, for 1pump system PN 54825″ is in sale since Wednesday, March 6, 2019. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines et piscines thermales\Spas et bains à remous”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
Complete BUNDLE KIT of Spa pack IN. YJ + 4kw/240V (1kw/120V) remote Heater + IN. K200 topside control keypad + Light cable & socket & 12V white LED (T10base) + Adapter plate for keypad + Mounting plate & screws. YJ-2-H4.0-AMP-GD1 120/240V 60Hz 32A max (North America). Pump#1 with 1 or 2 speeds, 120/240V max 15A. Ozonator 120/240V max 3A. Direct output connection (always hot) max 10A. Heater 4kw/240V max 16A or 1kw/120V max 10A. Light or LED 12V AC 0.5A/6W. AMP plug receptacle include or direct PCB quick connect terminals 0.25tabs. YJ small package, zero compromise. Treat your one pump spa with dignity! Say hello to the newest member of the Y Series! Yjs size offers the flexibility to be easily assembled in your small footprint spa, without losing out on functionality and options. Like all Y Series packs, the in. Yj is compatible with our in. K series of keypads. And what’s more, the Y Series also takes into account future compatibility, so you can have peace of mind knowing that you can enjoy the Y Series for years to come. Yj spa control system is equipped with a remote heater that simplifies the installation and location in the equipment compartment of smaller spas. The full size heater 2 will not reduce flow to the spa jets. Filed convertible 120 to 240V. The Y Series provides easy access to the control board for all maintenance and replacement requirements, including conversion between 120 and 240 V. The Y Series will fit each and every spa produced today and well into the future. With the Y Series: you’re ready. This product is the simplest, most flexible solution when it comes to supporting even the most complex array of spa add-ons and options. The Y series offers the kind of simplicity that makes for a genuine top-of-its-class product. It is the natural choice for anyone who wants an easy-to-understand multi-application solution. Total flexibility, total compatibility, total satisfaction. With the Gecko Y series you don’t have to wonder about compatibility; instead, theres just the comforting certainty that when you invest in the Y series, all spa configurations are supported. What’s more, the Y series also takes into account future compatibility, so you can have peace of mind knowing that you can enjoy the Y series for years to come. Geckos new Y series Spa Control System matches any spa available. If its a spa, the Y series will adapt to it. This durable, efficient new controller gives you everything you need in a spa control system while taking flexibility to a whole new level. System designed to accept future technologies. The Y Series will remain state-of-the-art for many years to come. Its an investment for today, and the future. Advanced technology that responds to todays market by providing a genuinely simple way to make finished products more attractive. AMP connector and quick connect versions of the Y packs are both available. Single platform covering low to high-end spas. From simple entry level hot tubs to complex swim spa systems, the Y Series meets all requirements. The Y Series provides easy access to the control board for all maintenance and replacement requirements. Keypad auto detection options are also featured. Whatever the spa, this is your control system. Input was designed to ease wire insertion(up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime. A heater safety system located on the heat. Wav heater with an all-electronic dry-fire protection. Seal provides an extra level of protection against water infiltration. Connectors and power box are designed to be watertight so that no water can be in direct contact with electrical components (IPX5). Cip is an intelligent water temperature refresh algorithm that calculates optimal time to start pumps and get water temperature readings. Cip continuously readjusts the heater start time. Stik is a pen drive with an in. Link connector very similar to a USB memory stick. It connects to the spa pack and contains data to program or configure its system. The system executes the data upload automatically. Ingenious plugs and connectors. The Y Series is only compatible with the low-voltage family of in. Link connectors, such as those used by keypads and similar low-voltage accessories. You’re always in touch with your relaxation. All Y Series packs support the in. Touch WiFi interface , allowing you to use your favorite iOS & Android-base devices to communicate with your spa. K600 Static main keypad. 11 keys, 14 function icons. LCD display, 8 keys, 10 function icons. LCD display, 8 keys, 6 function icons. LCD display, 6 keys, 8 function light indicators. LCD display, 4 keys, 7 function light indicators. (INCLUDE IN THIS BUNDLE KIT). LCD display, 7 keys, 10 function icons. K800 main keypad Color LCD display, 10 keys. K500 main keypad Color LCD display, 7 keys. LCD display, 4 keys. 32F (0C) to 140F (60C). 13°F (-25°C) to 185°F (85°C). Humidity: up to 85% RH, non condensing. IPx5 for TUV (CE/AUS/NZS) & CSA Enclosure #2. Certain current limits may apply. Please talk to your customer. Service representative for more information. Dimensions: (W x H x D). 12.08″ x 7.38″ x 3.74 (307 x 187 x 95 mm). Weight: 3.1 lb (1.41 kg). 19.58″ x 4.94″ x 3.92 (497 x 125 x 100 mm). Weight: 4.65 lb (2.1 kg). Y Series UL/CSA electrical specifications (North America). 60 Hz nominal +1.5 / -1.0 Hz. (2 lines required with neutral) 32 A Max. 120 V nominal only (+5/-10%). (single line with neutral) 16 A Max. Voltage: 120 or 240 V, 60 Hz. Wattage: 4 kW at 240 V, 1 kW at 120 V. Flow rate: Minimum of 18 GPM (68.1 LPM) is required. Pump 1 (2-spd) 120 or 240 V 15 FLA/60 LRA (inrush). 120 or 240 V 3 FLA/6 A. Direct out 1 120 or 240 V 10 A (always on). Light output 12 Vdc 0.5 AMP (6W Light bulb). 1 Certain current limits may apply. Please talk to your customer service representative for more information. 2 Total of Pump 1, O3 and Direct out should not exceed. 16 FLA for UL/CSA version. 3 The output voltage is selectable according to input supply. 4 The ozonator is connected in parallel with the Pump 1 low speed. Therefore they cannot be controlled independently. This “item” is for. YJ + Heater Heat. K200 topside control keypad + Light cable & socket + Adapter plate for keypad + Mounting plate & screws. AMP plug receptacle or direct PCB quick connect 0.25 terminals. COMPLETE OEM PRODUCT FROM GECKO DIRECTLY, Brand new object. (45x35x20 cm — 4.54kg). Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4 days with tracking#. CanadaPost + your local Postal services. International surface/boat parcel – 4 to 7 WEEKS, with tracking#. Xpresspost International – EMS – 4-10 days, with tracking. The item “Aeware by Gecko 1pump spa pack system with heater, topside keypad, cord & LED” is in sale since Saturday, November 12, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines & piscines thermales\Spas & bains tourbillons”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
