»
S
I
D
E
B
A
R
«
Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi
Apr 15th, 2018 by admin
Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi


Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi


Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi


Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi


Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi


Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi


Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi



Balboa BP2000 RetroFit Kit. 5.5Kw Digital Spa Controller – With WiFi. Made in America. Includes TP800 Top Side Controller. Optional – Integrates with you iPhone, iTouch, Pad. And similar Android devices! The BP Series The BP Series is a newly designed and improved plat form that focuses on reliability. The BP2000 uses a more advance carbon bases casing that is highly flame retardant and impact resistant. New Features such as quick disconnect heater elements, Wi-Fi Ready, and Press and Hold topside navigation buttons. This is a high end retrofit kit suitable for tubs with multiple pumps (up to 5) and is designed to replace an older spa pack from from Balboa or other manufactures hot tub control system such as Gecko, Colman, Hydro Quip, Spa Guts, Arctic Spa, LA Spas, Beach Comber, Sundance, Emerald Spas, Maxx Spa, Hydro Spa, Hot Spring to name a few. The retrofit kit comes complete with the TP600 digital top side controller (TP800 is optional), and a set of cables and adapters (3x 4-wire for 2-spd pumps, 3 x 3-wire for 1-spd pumps and 1 x 2-wire light assembly). Detailed retrofit instructions are also included so that a spa owner with some electrical servicing knowledge can quickly change over to this equipment by BALBOA the world leader in Spa Heaters. The BP Series uses M7 Technology which is simply the best spa pack technology on the market. Completely digital circuitry means less failure, more accurate heating range (+/- 1 degree F). And it now includes both a high range (80-104F) and a low range (50-99 F) operation. The Patented M7 Technology removes the need for pressure sensors and remote heat sensors common on other older spa packs. This unique technology allows the spa pack to be positioned in any location or direction (before or after the pump or before or after the filter). Although this spa pack can work at 120 VAC in which case it will produce 1.5 Kw of heat, it is primarily expected that it will be used at 230 VAC (requiring 40-60 AMP service) and will produce 5.5 kW of heat. One or more auxiliary heater, each producing 4.0 kW or 5.5kW can be slaved to the unit if more power is required. Its union tail pieces (included) fit standard 2″ piping or with reducers can be easily adapted to 1.5″. Built in programmable features such a 1 or 2 filter cycle programming per day by duration or time of day , various power saving modes including oReady, oRest and oReady in Rest, High (80-104°F) and Low (50-99°F) temperature setting, ozone suppression, clean up cycle, freeze protection, panel lock, temperature lock, standby mode for filter changes and sophisticated diagnosis and reminder measures are just some of the features. It also has the ability to select how much current will be drawn allowing a breaker as low as 30 Amp, yet still deliver the full 5.5 kW of electric heat. It has receptacles for supporting a wide range of configurations (setups) as illustrated in the table below. 11.50 High x 17 Long x 4.8 Deep. Includes : 3×4-wire 2-spd pump cables, 3 x 3-wire cables, 1x 12v light wire kit, 1 x BPX2 cable adapter kit, 1 x spare male AMP plug with pins. Includes: Detailed instruction manual for installation to replace another brand of Spa Heater. Ozone support (ozonator voltage will be same as voltage of heater pump). High or Low current mode. The flow through heater tube must be a minimum of 20 USGPM if the heater is 5.5 kW. This flow rate should be checked if your spa uses a small circulation pump such a Laing E14 or others made by Grundfos or Waterway Mighty-Might. These small pumps when used with 1 piping typically cannot produce this flow. Can only handle maximum of 4 pumps or 3 pumps plus blower excluding the circulation pump if used. MADE IN AMERICA not China! PN# 50261 TP800 Topside Controller with Jets1, Jets2, Aux, Warm, Light, Cool control buttons (TP600 optional). Wireless Adapter PN 50350. Your #1 Hot Tub Parts Replacement Store! The item “Balboa BP2000 Retro Fit Kit- Spa Pack with TP800 Controller cables and WiFi” is in sale since Sunday, May 08, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “hot-tub-parts” and is located in Winnipeg, Manitoba. This item can be shipped to United States, Canada.

  • UPC: 045996491128
  • Brand: Pentair
  • MPN: Kit-Retrofit–BP2000-TP800-WIFI
»  Substance: WordPress   »  Style: Ahren Ahimsa