»
S
I
D
E
B
A
R
«
Hot tub heater coil & stand stainless steel outdoor water heater
Feb 23rd, 2021 by admin
Hot tub heater coil & stand stainless steel outdoor water heater


Hot tub heater coil & stand stainless steel outdoor water heater


Hot tub heater coil & stand stainless steel outdoor water heater


Hot tub heater coil & stand stainless steel outdoor water heater



Just lots of hot water for your wood-fired hot tub :. A stainless steel heater coil with stainless steel stand – great for heating your hot tub without any need for electrical plug points, extension cables etc made from extremely durable materials. Great for long-term outdoor use. 6 metres of 1(25.4mm) stainless 304 steel tube (with a 1.5mm wall). Inner diameter – 300mm. Outer diameter – 360mm. Two coil heights – compact approx. 170-200mm high, good for logs and charcoal and standard (approx 210-250mm high, good for logs). MESSAGE US WITH YOUR PREFERRED COIL HEIGHT – if you do not specify a preferred coil height, we will dispatch a standard coil. Comes with 300mm tails. Tail length is measured from the outermost edge of the coil to the end of the tail. 260mm tall, 375mm wide across the circle and 540mm wide including the legs. Made from heavy-duty 304 stainless steel round bar and stainless steel mesh. To use, first attach to your hot tub by using any suitable method (compression fittings, radiator hose, welded threaded connections or flanges – please note these are not available with this item). Then build a fire within the coil and allow the hot tub water to heat. Heating time will vary depending on water temperature, ambient temperature and hot tub size – be sure to have a means of checking your water temperature before use and of reducing/extinguishing your fire once that temperature is reached. We are a small, family-run business in central Scotland. We can make custom heater coils for wood-fired hot tubs and similar in a variety of sizes with regard to overall diameter, coil pitch, height, tail length and welded-on fittings. The item “Hot tub heater coil & stand stainless steel outdoor water heater” is in sale since Tuesday, September 15, 2020. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “firetreemetalworks” and is located in Larkhall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

  • Shape: Circle
  • Colour: Stainless steel
  • Country/Region of Manufacture: United Kingdom
  • Material: Stainless Steel
  • Type: Hot Tub
  • MPN: Does Not Apply
  • Frame Material: Stainless Steel
  • Heating Source: Wood-Fired
  • Brand: Firetree Metalworks
XL stainless steel heater coil 12 metre tube for x-large wood-fired hot tubs
Jan 14th, 2021 by admin
XL stainless steel heater coil 12 metre tube for x-large wood-fired hot tubs


XL stainless steel heater coil 12 metre tube for x-large wood-fired hot tubs


XL stainless steel heater coil 12 metre tube for x-large wood-fired hot tubs


XL stainless steel heater coil 12 metre tube for x-large wood-fired hot tubs


Just lots of hot water for your larger wood-fired hot tub :. Extra large, stainless steel, hot tub heater coil. For heating larger hot tubs using sustainably-sourced firewood – no electricity or cables required! 12 metres of 1(25.4mm) stainless 304 steel tube (with a 1.5mm wall). Inner diameter – 300mm. Outer diameter – 360mm. Coil heights – approx 360mm. Comes with 400mm tails. Tail length is measured from the outermost edge of the coil to the end of the tail. We’re a small family business based in Scotland’s central belt. Please check out our other listings for different coil types, coils with heat-resistant hose, coils with brass connectors and more! We can also make custom coils. The item “XL stainless steel heater coil 12 metre tube for x-large wood-fired hot tubs” is in sale since Thursday, December 31, 2020. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “firetreemetalworks” and is located in Larkhall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

  • Shape: Circle
  • Item Height: 36cm
  • Item Width: 35cm
  • Material: Stainless Steel
  • Type: Hot Tub
  • Item Length: 75cm
  • Frame Material: Stainless Steel
  • Brand: Firetree Metalworks
Hot tub heater coil with 3/4 BSP thread ends stainless steel outdoor water
Oct 22nd, 2020 by admin
Hot tub heater coil with 3/4 BSP thread ends stainless steel outdoor water


Hot tub heater coil with 3/4 BSP thread ends stainless steel outdoor water


Hot tub heater coil with 3/4 BSP thread ends stainless steel outdoor water


Hot tub heater coil with 3/4 BSP thread ends stainless steel outdoor water


Just lots of hot water for your wood-fired hot tub :. Large, stainless steel, hot tub heater coil with threaded ends for easy connection to your set-up. For heating hot tubs using sustainably-sourced firewood or charcoal (depending on coil style) – no electricity or cables required! 6 metres of 1(25.4mm) stainless 304 steel tube (with a 1.5mm wall). Inner diameter – 300mm. Outer diameter – 360mm. Two coil heights – compact approx. 200mm high, good for short logs and charcoal and standard (approx 250mm high, good for logs). LET US KNOW WHAT COIL HEIGHT YOU WOULD PREFER. Comes with 300mm tails. Tail length is measured from the outermost edge of the coil to the end of the tail. This coil comes with 3/4 inch British Standard Pipe threaded ends securely welded on. Check out our other listings for coils without connectors, with heat-resistant hose and with smoke guards! We can make custom stainless steel coils for wood-fired hot tubs in a variety of sizes with regard to overall diameter (we can go wider, but not narrower), coil pitch, height, tail length and welded-on fittings. We also make stainless hot tub stands and fire holders. The item “Hot tub heater coil with 3/4 BSP thread ends stainless steel outdoor water” is in sale since Friday, June 26, 2020. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “firetreemetalworks” and is located in Larkhall. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

  • Features: Heated
  • Frame Material: Stainless Steel
  • Country/Region of Manufacture: United Kingdom
  • Material: Stainless Steel
  • Colour: Silver
  • Heating Source: Wood-Fired
  • Brand: Firetree Metalworks
  • Type: Hot Tub

Recent searches

  • ?term= (?)intext:account jewlry
Hot tub heater coil with 2 x 50cm of high temperature hose stainless steel
Oct 13th, 2020 by admin
Hot tub heater coil with 2 x 50cm of high temperature hose stainless steel


Hot tub heater coil with 2 x 50cm of high temperature hose stainless steel


Hot tub heater coil with 2 x 50cm of high temperature hose stainless steel


Just lots of hot water for your wood-fired hot tub :. A stainless steel heater coil with 2 x 50cm heat-resistant hose – great for heating your hot tub without any need for electrical plug points, extension cables etc made from extremely durable materials. Great for long-term outdoor use. 6 metres of 1(25.4mm) stainless 304 steel tube (with a 1.5mm wall). Inner diameter – 300mm. Outer diameter – 360mm. Two coil heights – compact approx. 200mm high, good for logs and charcoal and standard (approx 250mm high, good for logs). MESSAGE US WITH YOUR PREFERRED COIL HEIGHT. Comes with 300mm tails. Tail length is measured from the outermost edge of the coil to the end of the tail. Heavy-duty, 1 heat-resistant hose. Can withstand up to 120 degrees centigrade. Stainless steel jubilee clips provided to secure the hose. To use, first attach to your hot tub by using any suitable method (compression fittings, radiator hose, welded threaded connections or flanges – please note that not all of these are available with this item). Then build a fire within the coil and allow the hot tub water to heat. Heating time will vary depending on water temperature, ambient temperature and hot tub size – be sure to have a means of checking your water temperature before use and of reducing/extinguishing your fire once that temperature is reached. Check out our other listings for coils with threaded connectors, smoke guards and stands! We are a small, family-run business in central Scotland. We can make custom heater coils for wood-fired hot tubs and similar in a variety of sizes with regard to overall diameter, coil pitch, height, tail length and welded-on fittings. The item “Hot tub heater coil with 2 x 50cm of high temperature hose stainless steel” is in sale since Monday, June 29, 2020. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “firetreemetalworks” and is located in Larkhall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam, Philippines.

  • Shape: Circle
  • Colour: Stainless steel
  • Country/Region of Manufacture: United Kingdom
  • Heating Source: Wood-Fired
  • Brand: Unbranded
Water heater coil with fireguard hot tub outdoor pool stainless steel
Oct 6th, 2020 by admin
Water heater coil with fireguard hot tub outdoor pool stainless steel


Water heater coil with fireguard hot tub outdoor pool stainless steel


Water heater coil with fireguard hot tub outdoor pool stainless steel


Just lots of hot water for your wood-fired hot tub :. A stainless steel heater coil with welded stainless steel smoke guard – great for heating your hot tub without any need for electrical plug points, extension cables etc made from extremely durable materials. Great for long-term outdoor use. 6 metres of 1(25.4mm) stainless 304 steel tube (with a 1.5mm wall). Inner diameter – 300mm. Outer diameter (including the smoke guard) – approx. 190mm (6 coils) high – works well with both wood and charcoal. Comes with 300mm tails. Tail length is measured from the outermost edge of the coil to the end of the tail. Made from 0.9mm stainless steel sheet, 250mm tall. Fitted and welded around the coil. Enhances the thermo-syphon effect of the coil, containing the heat of the fire and channeling airflow more effectively. To use, first attach to your hot tub by using any suitable method (compression fittings, radiator hose, welded threaded connections or flanges – please note these are not available with this item). Then build a fire within the coil and allow the hot tub water to heat. Heating time will vary depending on water temperature, ambient temperature and hot tub size – be sure to have a means of checking your water temperature before use and of reducing/extinguishing your fire once that temperature is reached. Check out our other listings for coils with threaded connectors, heat-resistant hose and stands! We are a small, family-run business in central Scotland. We can make custom heater coils for wood-fired hot tubs and similar in a variety of sizes with regard to overall diameter, coil pitch, height, tail length and welded-on fittings. The item “Water heater coil with fireguard hot tub outdoor pool stainless steel” is in sale since Sunday, September 6, 2020. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “firetreemetalworks” and is located in Larkhall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam, Philippines.

  • Shape: Circle
  • Colour: Grey
  • Country/Region of Manufacture: United Kingdom
  • Brand: Unbranded
  • Heating Source: Wood-Fired
Hot tub heater coil stainless steel outdoor water heater heat exchanger
Aug 15th, 2020 by admin
Hot tub heater coil stainless steel outdoor water heater heat exchanger


Hot tub heater coil stainless steel outdoor water heater heat exchanger


Hot tub heater coil stainless steel outdoor water heater heat exchanger


Hot tub heater coil stainless steel outdoor water heater heat exchanger


Hot tub heater coil stainless steel outdoor water heater heat exchanger


Hot tub heater coil stainless steel outdoor water heater heat exchanger


Hot tub heater coil stainless steel outdoor water heater heat exchanger


Just lots of hot water for your wood-fired hot tub :. Basic stainless steel heater coil – great for heating your hot tub without any need for electrical plug points, extension cables etc made from extremely durable materials. Great for long-term outdoor use. 6 metres of 1(25.4mm) stainless 304 steel tube (with a 1.5mm wall). Inner diameter – 300mm. Outer diameter – 360mm. Two coil heights – compact approx. 200mm high, good for logs and charcoal and standard (approx 250mm high, good for logs). MESSAGE US WITH YOUR PREFERRED COIL HEIGHT. Comes with 300mm tails. Tail length is measured from the outermost edge of the coil to the end of the tail. Check out our other listings for coils with threaded connectors, smoke guard, heat-resistant hose and other accessories! We are a small, family-run business in central Scotland. The item “Hot tub heater coil stainless steel outdoor water heater heat exchanger” is in sale since Wednesday, June 17, 2020. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “firetreemetalworks” and is located in Larkhall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Dominican republic, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

  • Shape: Round
  • Colour: Grey
  • Country/Region of Manufacture: United Kingdom
  • Brand: Unbranded
Softub Pump 1HP 230V 6.0 Amps, 1 Speed with Thermal Wrap (replaces coil wrap)
Feb 20th, 2020 by admin
Softub Pump 1HP 230V 6.0 Amps, 1 Speed with Thermal Wrap (replaces coil wrap)


Softub Hot Tub Pump Replacement – Typically used in European market. 1 HP, 230 Volts, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : US Motors (AGH10FL1) Horse Power: 1 Service Factor 1.0 (Often labeled 1.5hp SPL) Volts: 220-240 Amps: 6.0/6.3 RPM: 2850/3450 Frame: 48Y – Thru Bolt W/Base. Pump: (pre-installed on motor) Mfg: Balboa – Front Discharge. 1 HP (1.5HP SPL) Bottom Suction X Front Discharge. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Pump 1HP 230V 6.0 Amps, 1 Speed with Thermal Wrap (replaces coil wrap)” is in sale since Tuesday, July 30, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped worldwide.

  • Country of Manufacture: United States
  • Model: Softub Pump Retro-Fit
  • Country/Region of Manufacture: United States
  • Type: Front Discharge
  • MPN: Softub 230V Front Discharge
  • Brand: Hydro Thermix
Softub Pump 1HP 230 Volts, 6.0 Amps, 1 Speed withThermal Wrap replaces coil wrap
Nov 14th, 2019 by admin
Softub Pump 1HP 230 Volts, 6.0 Amps, 1 Speed withThermal Wrap replaces coil wrap


Softub Pump 1HP 230 Volts, 6.0 Amps, 1 Speed withThermal Wrap replaces coil wrap


Softub Hot Tub Pump Replacement – Typically used in European markets. 1 HP, 230 Volts, 50HZ, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : US Motors (AGH10FL1) Horse Power: 1 Service Factor 1.0 (Often labeled 1.5hp SPL) Volts: 220-240 Amps: 6.0/6.3 RPM: 2850/3450 Frame: 48Y – Thru Bolt W/Base. Pump: (pre-installed on motor) Mfg: Aqua-Flo P/N. 1 HP (1.5HP SPL) 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/split unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Pump 1HP 230 Volts, 6.0 Amps, 1 Speed withThermal Wrap replaces coil wrap” is in sale since Tuesday, July 30, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped worldwide.

  • Country of Manufacture: United States
  • Model: Softub Pump Retro-Fit
  • Country/Region of Manufacture: United States
  • Type: FMCP
  • MPN: Softub 230V
  • Brand: Hydro Thermix
Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)
Sep 1st, 2017 by admin
Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Hot Tub Pump Replacement – 1 HP with Pre-Installed “Thermal Wrap” Heater Jacket. Through the past 20+ years we have supplied hundreds of Thermal Wrap Heat Jacket systems for Softub applications. The Thermal Wrap Heat Jacket will heat your Softub as well if not better than the coil wrap. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : Century / A. Smith Horse Power: 1 Service Factor 1.0 (1.5hp SPL) Volts: 115 Amps: 11.8 – 12 RPM: 3450 Frame: 48Y HZ: 60 Stainless Shaft Thermally Protected. Pump: (pre-installed on motor) Mfg: Aqua-Flo P/N. 1 HP 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Friday, November 25, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.

  • Brand: Hydro Thermix
  • Model: Softub Pump Retro-Fit
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Type: FMCP
  • MPN: 02610000-1010
Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)
Mar 8th, 2015 by admin
Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)


Hot tub pump replacement – 1 hp – “front discharge” with pre-installed “thermal wrap” heater jacket – complete as in first picture. Through the past 20+ years we have supplied hundreds of thermal wrap heat jacket systems for softub applications. The thermal wrap heat jacket will heat your softub as well if not better than the coil wrap. Please note: the last picture shown above is for illustration purposes only; the pump shown is a “side discharge” version and not a front discharge pump per this listing. Motor & pump with pre-installed thermal wrap. Hp: 1 – service factor 1.0 (1.5hp spl). 11 – 13.6 amps. Pump: (pre-installed on motor). 1 hp (1.5hp spl). 1 1/2″ bottom suction x front discharge – pump ports measure 2 1/4″ diameter and fit your existing plumbing connections. Note: also available with (center suction x side discharge) and (center suction x center discharge). More about the thermal wrap – heat transfer system. Tub water circulates through a serpentine path in the thermal. Wrap, collecting the heat generated by the pump/motor and recycles that. Heat to the tub water – were it belongs! Patented heating system for hot tubs/spas and whirlpool baths, captures. And recycles the waste heat “energy” produced by the pump/motor and. Delivers that heat to the hot tub or bath water. System will heat and maintain water temperature. The system allows the. Motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the usa! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the thermal. Wrap serves as the only heat source for many spas including:quantum, dreammaker, freeflo, pdc spas, softub and others. And retrofitted to work with most spas requiring 1 hp single speed, 3450. Rpm, 115volts pump motor. Even if you have an electric heater on your spa, the thermal wrap system will. Compliment your electric heater by capturing the waste heat generated by. Your pump motor and delivering that heat to the tub water, saving you. The thermal wrap will help maintain water. Temperature during normal filtering and heating cycles and while using. Your spa in high speed jet action.The item “Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Thursday, August 21, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States and to Canada.

  • Brand: Century – Vico Balboa – Hydrothermix
  • Model: Softub Pump Retro-Fit
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Ultra Jet Pump (Wet End): Century Vico Balboa Hydrothermix Brand
»  Substance: WordPress   »  Style: Ahren Ahimsa