»
S
I
D
E
B
A
R
«
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords
Apr 13th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords



NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, air blower cord, light cord, secondary pump cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel 2 inch diameter high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 6 cords for pump, blower, topside, temp sensor, secondary pump, and light. If you have an air blower and 2 pumps, the secondary pump will be on-off only. If you have 2 pumps and no air blower, then the secondary pump can be controlled as a 2-speed. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light and secondary pump cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or other device, a secondary pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower, light, and secondary pump, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. A secondary pump cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords” is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, second pump, & light
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Air Blower, Light, and Secondary Pump
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords
Mar 9th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, blower cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 5 cords for pump, blower, topside, temp sensor, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower or second pump, and a light, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords” is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, light, option for ozone and
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Blower & Light
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords
Feb 5th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords



NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, blower cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 5 cords for pump, blower, topside, temp sensor, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower or second pump, and a light, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords” is in sale since Tuesday, January 02, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, light, option for ozone and
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Blower & Light
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords
Jan 30th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, air blower cord, light cord, secondary pump cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 6 cords for pump, blower, topside, temp sensor, secondary pump, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light and secondary pump cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or other device, a secondary pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower, light, and secondary pump, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. A secondary pump cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords” is in sale since Sunday, November 12, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, second pump, & light
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Air Blower, Light, and Secondary Pump
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords
Dec 4th, 2017 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, blower cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 5 cords for pump, blower, topside, temp sensor, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower or second pump, and a light, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords” is in sale since Friday, November 10, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, light, option for ozone and
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Blower & Light
Balboa Water Group Control VS-510SZ With Topside & Cords 54218-Z
Dec 16th, 2016 by admin
Balboa Water Group Control VS-510SZ With Topside & Cords 54218-Z


Balboa Water Group – Control: VS-510SZ With Topside & Cords – 54218-Z. Pump 1, 120/240V, 2-Speed. Blower – 120/240V, 1-Speed. Ozone – 120/240V, Must Match Pump Voltage. Stereo Option 120V AV. Topside Serial 7 Button. AI # 3-00-8016 / MFG # 53189. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. Let us use our random knowledge of pools and spas to help you. We sure don’t get to talk about it when we go home after work, as that could bore our loved ones. The item “Balboa Water Group Control VS-510SZ With Topside & Cords 54218-Z” is in sale since Thursday, August 11, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other Pools & Spas”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, PA, TT, GT, HN, JM.

  • Brand: Balboa Water Group
  • Model: VS-510SZ WITH TOPSIDE AND CORDS
  • MPN: 54218-Z, 54218
  • Country of Manufacture: United States
»  Substance: WordPress   »  Style: Ahren Ahimsa