»
S
I
D
E
B
A
R
«
Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub
Feb 10th, 2018 by admin
Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub


Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub



Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa ONLY. Runs smooth and quiet NO leaks. This one has: brand NEW bearing brand NEW seal kit brand NEW interior hose clamps The motor is working fine and it pushes water through the jets using the air control assembly knob which goes from left to right. Copper brushes are in good shape with NO burn scorch marks. Bad News: The control panel is NOT working correctly. The touch pads are worn. The red digital numbers do go from 80 – 104 degrees but the numbers are fizzling out. At times the numbers do NOT appear on the panel, but the motor still pumps water thru jets regardless. (Or you can use your old working control panel). I ran it for 2 hours to test for leaks. (NONE) GFCI plug is working fine. This has the light feature but I could NOT test it because the tub did NOT have a light. You have to run it for 48 hours to heat up the water. (you can also add hot tap water to get faster results). The water heats up as it goes around the aluminum coils around the motor, so after 48 hours it should get to 104. I did not test it for 48 hours. If you need to see test video go to vimeodotcom and search. SOFTUB BROWN DEC 7 2017 TEST (NO commas) When I first shot video there was a small leak from bad lower hose clamp. I replaced the old one with a new clamp and hooked it up to the tub again and the leak was GONE. (I did NOT shoot a new video) Hoses & Clamps are NOT included. If the purchaser fails to read the details of this listing, that does not release the purchaser from the binding conditions of the sale. The item “Softub Soft Tub Digital Control Pump Powerpak Motor Hot Tub Spa Softtub” is in sale since Friday, January 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “kissmy234″ and is located in Edison, New Jersey. This item can be shipped to United States.

Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords
Feb 5th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords



NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, blower cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 5 cords for pump, blower, topside, temp sensor, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower or second pump, and a light, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords” is in sale since Tuesday, January 02, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, light, option for ozone and
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Blower & Light
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords
Jan 30th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords


NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, air blower cord, light cord, secondary pump cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 6 cords for pump, blower, topside, temp sensor, secondary pump, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light and secondary pump cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or other device, a secondary pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower, light, and secondary pump, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. A secondary pump cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 6 cords” is in sale since Sunday, November 12, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, second pump, & light
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Air Blower, Light, and Secondary Pump
ACC SmarTouch Digital 1000 Spa Control With Topside AMP Style SmarTouch 1000
Dec 24th, 2017 by admin
ACC SmarTouch Digital 1000 Spa Control With Topside AMP Style SmarTouch 1000


ACC SmarTouch Digital 1000 Spa Control W/ Topside – AMP Style – SmarTouch 1000 Topside: KP-1000 (Measures 5.5″ x 2.5″). Connectors: Standard AMP style receptacles Optional J&J style receptacles o = optional X = standard. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? Because with 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. Let us use our random knowledge of pools and spas to help you. We sure don’t get to talk about it when we go home after work, as that could bore our loved ones. The item “ACC SmarTouch Digital 1000 Spa Control With Topside AMP Style SmarTouch 1000″ is in sale since Tuesday, March 28, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other Pools & Spas”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

  • Brand: ACC
  • MPN: SmarTouch 1000
Jacuzzi Panel 2 Button, Temp Display, Echo Digital Control 2500-154, 52223
Dec 23rd, 2017 by admin
Jacuzzi Panel 2 Button, Temp Display, Echo Digital Control 2500-154, 52223


Jacuzzi Panel 2 Button, Temp Display, Echo Digital Control 2500-154, 52223


Jacuzzi Topside Panel: 2 Button w/ Temp Display Echo w/ Digital Control – 2500-154. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? Because with 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. We sure don’t get to talk about pools and spas when we go home after work, as that could bore our loved ones. The item “Jacuzzi Panel 2 Button, Temp Display, Echo Digital Control 2500-154, 52223″ is in sale since Wednesday, December 12, 2012. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other Pools & Spas”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

  • Brand: Jacuzzi, Sundance Spas
  • MPN: 2500-154, 52223
  • Model: 2 Button w/ Temp Display Echo w/ Digital Control
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords
Dec 4th, 2017 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, blower cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 5 cords for pump, blower, topside, temp sensor, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower or second pump, and a light, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords” is in sale since Friday, November 10, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, light, option for ozone and
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Blower & Light
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v
Nov 6th, 2017 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


15″ 4kw High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 4000 watt stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.0kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v” is in sale since Wednesday, October 04, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
Hot Tub Heater Control Digital Spa Controller Pack SMTD 2000 ACC 120/240V NEW
Sep 30th, 2017 by admin
Hot Tub Heater Control Digital Spa Controller Pack SMTD 2000 ACC 120/240V NEW


Hot Tub Heater Control Digital Spa Controller Pack SMTD 2000 ACC 120/240V NEW


Hot Tub Heater Control Digital Spa Controller Pack SMTD 2000 ACC 120/240V NEW


Hot Tub Heater Control Digital Spa Controller Pack SMTD 2000 ACC 120/240V NEW



A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes 4000 watt stainless steel high flow 4.0kw heater, 15 long, standard size. Make us an offer! This Smartouch Digital Control comes with 4kw 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Topside drops into 2.5×6.5 cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and a second pump, and an air blower or 3rd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and second pump, with quick disconnect plugs to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long stainless steel high flow 2 heater, with standard 4.0kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 2000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.0kw or 1000 watts. From the factory the SMTD2000 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5.5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD2000. 15″ 4000 watt stainless steel high flow 4.0kW heater with standard threaded couplings for 2″ PVC plumbing. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. (Extension cords available at extra cost) Drops into 2.2×6.2 cutout. Two (2) pump 4-wire power cords, 48 long with quick disconnect AMP plugs and motor connectors. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “Hot Tub Heater Control Digital Spa Controller Pack SMTD 2000 ACC 120/240V NEW” is in sale since Saturday, June 17, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: ACC, Applied Computer Controls
  • MPN: smtd2000
  • Model: SMTD 2000
  • Controls: main pump, air blower, second pump, light, ozone
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch 4000 watt 4.0kW
  • Warranty: Factory Warranty by ACC 24 months *
  • Display: Digital Topside Keypad 3.25×7.25″
  • Dimensions: 14.6Tx15.4Wx5.5″D
  • Includes: All Power Cords
  • Intended Use: For portable spas, mounted under redwood skirt.
Dreammaker Spas Hot Tubs Digital Topside Controller
Sep 25th, 2017 by admin
Dreammaker Spas Hot Tubs Digital Topside Controller


Dreammaker Spas Hot Tubs Digital Topside Controller


Digital Topside Controller Item# SPADM. 4 button control, overlay shown to help you match, not included with topside control, but we do sell it. Made by Balboa for Dreamaker. Please verify that this matches the control you are replacing, it fits MOST Dreamaker spas, but NOT all. International Buyers § Please Note. We do not mark merchandise values below value or mark items as’gifts’: US and International government regulations prohibit such behavior. This shows it is in route or delivered, but not much in between. Those packages essentially go standby. The item “Dreammaker Spas Hot Tubs Digital Topside Controller” is in sale since Monday, June 27, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “novacompanies” and is located in Cerro Gordo, Illinois. This item can be shipped worldwide.

  • Brand: DreamMaker Spa
  • MPN: 407012
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v
Aug 2nd, 2017 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


15″ 4.0kw 4000 watt High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 4000 watt (4kw) stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. So message us if you want 3-wire and we’ll respond with cost and leadtime. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v” is in sale since Saturday, June 17, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in southern California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
»  Substance: WordPress   »  Style: Ahren Ahimsa