»
S
I
D
E
B
A
R
«
Intex inflatable pool hydro massage Bubble Spa with filter heater e trat
Mar 24th, 2018 by admin
Intex inflatable pool hydro massage Bubble Spa with filter heater e trat


Intex inflatable pool hydro massage Bubble Spa with filter heater e trat. The description of this item has been automatically translated. Intex inflatable pool Jacuzzi Bubble Spa with filter and heater-lime treatment. Structure made of’ FiberTechTM’ for an exceptional resistance to the loads. Which holds up to 4 people, presents on the bottom 120 holes from which come out relaxing massage jets. With filtration system (1893 l/h) heating (1.5-2.5° C/h) and massage jets, very low energy consumption (0.83 Kw/h/° C). With anti-limescale water-processing system. How to request an invoice. If your parcel is stranded or in stock we will notify you and to do everything in ns. To overcome the impasse. In accordance with article 5 of legislative decree 185 of 1999, the customer can withdraw from the contract/order signed on the Internet without penalty and without giving any reason, subject to the conditions below. The right of withdrawal. For lack of the essential integrity of the property (the packaging and / or its contents). Using any part of the property and any supplies. The lack of the outer and / or internal packaging. The absence of product components accessories, cables, manuals, parts… Damage to the product for reasons other than its transport. Responsibility We take no responsibility for the loss of products after they have been delivered the goods. Therefore, we reserve the right to change / adapt the technical information of products in the catalog, without any prior notice. The pictures of the articles are indicative and the characteristics of items delivered may differ slightly from the photos in the catalog. Availability Products We reserve the right to accept or decline any orders that are placed and in any case until all the goods. In the event that the item ordered is no longer available, we the right to cancel the request and credit back any amounts paid. Prices Product prices are VAT included. Prices may be modified at any time, without notice. Privacy Policy Information in accordance with art. # 196/2003 (personal data protection code) Your personal data will be collected with the aid of electronic means and processed also using for their inclusion in a database for the time necessary to achieve the purposes for which they were collected, and in any case with tools and procedures that guarantee security and confidentiality by Inferramenta Srl. Specific security measures are observed to prevent the loss of data, illegal or incorrect use and unauthorized access. We inform you that the personal information you provide will be used by Inferramenta Srl for the sole purpose of providing the services requested and within the limits of Inferramenta Srl communication activities (sending of informative material such as newsletters, to queries, reports replies) with mode strictly necessary for this purpose. The Controller of personal data is Inferramenta Srl, with registered office in Via Provinciale Turci, 83-83025 Montoro (AV). The item “Intex inflatable pool hydro massage Bubble Spa with filter heater e trat” is in sale since Thursday, February 09, 2017. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “inferramenta.italia” and is located in 83025 Montoro (AV). This item can be shipped worldwide.

  • MPN: Does Not Apply
  • EAN: Does not apply
  • Brand: Unbranded
DIY Sauna Kit 7′ x 9′ Complete Sauna Room Package 9 Kw Electric Heater
Mar 23rd, 2018 by admin
DIY Sauna Kit 7' x 9' Complete Sauna Room Package 9 Kw Electric Heater


Complete Sauna Package 7′ x 9′ Sauna Room. Complete Sauna kit for pre-framed 7′ x 9′ room. Includes insulated cedar sauna door with tempered glass window, brass door hardware kit for rough opening 26″ x 78″. 9 Kw Stainless Steel Sauna Heater with digital timer. Full A+ Better, Clear kiln dried T & G Western Red Cedar 7′ length boards for vertical installation of walls and ceiling. Clear western red cedar for benches (upper and lower 19 deep benches). 2 x Light kit, thermometer, aluminum vapor foil, vent kit included, heater guard, floor interlocking PVC tiles. For Room Dimensions : 84″ wide x 108″ length x 84 high. 9 Kw HSH Sauna Heater. 100% clear wester red cedar wood with no sap or knots! All sauna kits come equipped with safety guard! CUSTOM SIZES AVAILABLE Call 1 800 759 8990! The item “DIY Sauna Kit 7′ x 9′ Complete Sauna Room Package 9 Kw Electric Heater” is in sale since Saturday, December 19, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sauna-heaters” and is located in Winnipeg, Manitoba. This item can be shipped to United States, Canada.

  • UPC: 608819221533
  • Brand: Homecraft
  • MPN: PN-Sauna-DIY-7ft x 9ft
Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v
Mar 22nd, 2018 by admin
Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v


Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v


Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v


Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v


Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v



Balboa VS300 spa pack. 5.5KW Heater element. This unit is like new and was pulled from a demo spa. In full working condition. Can retrofit multiple spa brands and manufacturers. The item “Balboa VS300 Spa One Pump Control Pack, PN 54603/ 54645 5.5Kw Heater 220/110v” is in sale since Sunday, November 12, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “aste2797″ and is located in Portage, Michigan. This item can be shipped to United States.

  • Brand: Balboa Water Group
  • Model: VS300FL5
Spa And Jacuzzi Heater 1500w 120v 12.5a
Mar 17th, 2018 by admin
Spa And Jacuzzi Heater 1500w 120v 12.5a


Spa And Jacuzzi Heater 1500w 120v 12.5a


Spa and jacuzzi heater by GG Industries, UL #20-15000-G2. The item “SPA AND JACUZZI HEATER 1500W 120V 12.5A” is in sale since Monday, January 22, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “clydesheba” and is located in Eustis, Florida. This item can be shipped to United States.

  • Brand: Jacuzzi
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230
Mar 10th, 2018 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


15″ 5.5kw High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 5500 watt stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230″ is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.

Recent searches

  • acc smtd 1500-pal-d circuit board
  • smtd1000 parts
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords
Mar 9th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords


NEW spa control system, complete, by United Spas, model C5/CBT7, controls 2 speed main pump and air blower, plus light, and receptacle for an ozonator too, with pump power cord, blower cord, light cord, users manual, and digital topside display. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5kw heater, 15 long, standard size. A very complete kit with topside and 5 cords for pump, blower, topside, temp sensor, and light. This makes the unit fully self-contained, so you won’t have to locate the temp sensor yourself, saves time! Message us though, please. This CBT7 Control comes with 5kw 15″ high flow heater, 2.5×5.0″ Topside display/keypad, pump and blower and light cords, and is a complete unit to replace your old spa control and heater. Topside drops into a 1-3/4 round cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has a receptacle for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and an air blower or second pump, and a light, with quick disconnect plugs to the control. Temperature sensor comes with a long cord so you can either mount the sensor onto the heater, or, mount it in your tub if your tub has a drywell, has provision for a remote temp sensor. Cord is 8 feet long, but again it is your choice to mount it right on the heater or stick the sensor into a tub fitting you already have. Includes 15 inch long stainless steel high flow 2 heater, with 5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The CBT7 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.25kw or 1250 watts. From the factory the CBT7 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by United, and ready to go as is. Control box stands 11.1″ tall, and 15.5″ wide, 3.4″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By United Spas, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by United Spas. United has been building digital hot tub controls over 20 years. CBT7 Digital Control by United Spas model C5. 15″ stainless steel high flow 5kW heater with standard threaded couplings for 2″ PVC plumbing. Digital display keypad (topside) 2.5×5.0 with 9.5 foot long cord. Drops into 1-3/4 round cutout. One pump power cord 4-wire for a 2-speed pump, 45 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 57 with quick disconnect AMP plug, 18/3 wire size. Light cord with quick disconnect AMP plug, 8 foot long. Temperature sensor and cord. United Spas t& Topside Installation Manual & User’s Guide. United Spas C5 Series Installation & Service Manual. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Control Digital Spa Controller Pack C5 United Spas CBT7 & 5 cords” is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: United Spas
  • MPN: CBT7
  • Model: C5
  • Controls: main pump, air blower, light, option for ozone and
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by United Spas
  • Display: Digital Topside Keypad 5×2.5″
  • Dimensions: 11.1Tx15.5Wx3.4″D
  • Includes: Power Cords, Manuals
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Country/Region of Manufacture: United States
  • Type: Pump, Blower & Light
Balboa Spa control EL2001 Mach 3 With 5.5KW-800 Incoloy Heater 55066
Feb 28th, 2018 by admin
Balboa Spa control EL2001 Mach 3 With 5.5KW-800 Incoloy Heater 55066


Balboa – Spa control: EL2001 Mach 3 With 5.5KW-800 Incoloy Heater – 55066. Pump 1 – 240V, 2-Speed. Pump 2 – 240V, 2-Speed. AI # 3-00-8030 / MFG # 52649-01. ML700 Panel 8 Button. AI # 3-00-8024 / MFG # 52654-03. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. We sure don’t get to talk about pools and spas when we go home after work, as that could bore our loved ones. The item “Balboa Spa control EL2001 Mach 3 With 5.5KW-800 Incoloy Heater 55066″ is in sale since Tuesday, April 04, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other Pools & Spas”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

  • Brand: Balboa Water Group
  • MPN: 55066, 55066-04
  • Model: CONTROL: EL2001 MACH 3 WITH 5.5KW-800 INCOLOY HEAT
  • Country of Manufacture: United States
Spa hot tub 4 KW HEATER for Gecko Aeware IN. XE, IN. YE & IN. YT spa packs system
Feb 18th, 2018 by admin
Spa hot tub 4 KW HEATER for Gecko Aeware IN. XE, IN. YE & IN. YT spa packs system


Spa hot tub 4 KW HEATER for Gecko Aeware IN. XE, IN. YE & IN. YT spa packs system


Spa hot tub 4 KW HEATER for Gecko Aeware IN. XE, IN. YE & IN. YT spa packs system


Spa hot tub 4 KW HEATER for Gecko Aeware IN. XE, IN. YE & IN. YT spa packs system



Advanced electronics and water resistance. Xe comes with a high performance heat. With no pressure switch, it features in. Flo integrated dry-fire protection. Wav heater can be easily converted to dedicated 120v / 1kW by a simple switch of a cable connection port performed on production lines, in dealer showrooms or in the field. A watertight panel protects the heater and probe connectors. Removing the panel gives access to in. Flo dry-fire protection and hi-limit/regulation probe connectors, Line 1, Line 2 and ground power input cables connection ports. Supports 120v or 240v. Protected by external breaker (not fused). Heater element is Incoloy® for greater protection against corrosion. Gecko Aeware complete spa heater assy HEAT. Rated: 120/240V, 60Hz, 1kW/4kW power element, In. Flo connector ready to pin on pack’s circuit board. + PVC split Union Nuts (2)&Tailspieces + O’rings + screws. Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4 days with tracking#. CanadaPost + your local Postal services. International surface/boat parcel – 4 to 7 WEEKS, with tracking#. Xpresspost International – EMS – 4-10 days, with tracking. The item “Spa hot tub 4 KW HEATER for Gecko Aeware IN. XE, IN. YE & IN. YT spa packs system” is in sale since Thursday, July 28, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines & piscines thermales\Spas & bains tourbillons”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.

  • Marque: Aeware by Gecko
  • Type: Flo-Through
  • Numéro de pièce fabricant: 9920-101435
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Feb 16th, 2018 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Thursday, January 04, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: High Flow Heater
  • Brand: ACC
  • MPN: smtd1500
  • Model: ePack
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
LX APR200 V1 Air Blower Pump 0.5 HP (With Heater) 200W + 180W Hot Tub Spa
Feb 11th, 2018 by admin
LX APR200 V1 Air Blower Pump 0.5 HP (With Heater) 200W + 180W Hot Tub Spa


LX APR200 V1 Air Blower Pump 0.5 HP (With Heater) 200W + 180W Hot Tub Spa


LX APR200 V1 Air Blower Pump 0.5 HP (With Heater) 200W + 180W Hot Tub Spa


LX APR200 V1 Air Blower Pump 0.5 HP (With Heater) 200W + 180W Hot Tub Spa


> Shower Door Seals. > Shower Door Rollers. > Heads & Handsets. > Riser Rails & Hoses. > Shelf & Brackets. > Shower Body Jets. > Seats & Benches. > Drainage & Waste. > Fixtures & Fittings. > Speakers & Fans. > Shower Mixer Valves. > Bath Air & Water Jets. > Taps & Thermostats. > Bath Pipes & Fixtures. > Waste & Drainage. > Pumps & Sensors. > Sauna Bucket & Ladle. > Temperature & Timer. > Audio & Speakers. Part Number (SKU): LX-APR200-V1-PUMP-WH. 220V – 240V / 50Hz. See Power in Watts & Heater Power. Speed Revolutions / Minute. Information available upon request. Noise Level dB (A). Recommended Water Depth (metres). Water Volume Heating Capacity (Gallons). Water Volume Heating Capacity (Litres). Air Blower Pump With Heater. Jacuzzi , Whirlpool Baths, Small Swimming Pools. “The “”V1″” in this pump’s code means that it has a single stage impellar, WH in the code means that this air blower pump has a heater”. Any items that arrive faulty must be reported to our customer service team within 48 hours. If a direct replacement is not available, an alternative will be offered. The packaging for this item is a’large parcel’. We will do our best to assist. Di Vapor takes great pride in providing unrivalled customer service combined with high quality products? Ensuring that you are satisfied whilst providing a positive shopping is our priority. We are confident that we will deliver beyond your expectations and that you? Ll be more than satisfied with your purchasing experience with Di Vapor. However, we also understand that sometimes mistakes can happen or delays out of our control can reflect badly on your shopping experience. We will do our absolute best to ensure that any issues are resolved quickly and efficiently. We are constantly striving to provide a reliable service and product range that our customers keep coming back for? POPULAR ITEMS YOU MAY ALSO LIKE. The item “LX APR200 V1 Air Blower Pump 0.5 HP (With Heater) 200W + 180W Hot Tub Spa” is in sale since Friday, February 26, 2016. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “divapor” and is located in Solihull. This item can be shipped worldwide.

  • Brand: Di Vapor
  • MPN: LX-APR200-V1-PUMP-WH
»  Substance: WordPress   »  Style: Ahren Ahimsa