»
S
I
D
E
B
A
R
«
Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427
Sep 15th, 2017 by admin
Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427


Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427


Watkins Item # 74427 : Silent-Flo 5000 E5 – NEW Circulation Pump. This is a brand-new E5 circulation pump (part number 74427) from Watkins manufacturing – this is not a rebuilt part. This new model uses less electricity and moves more water per minute than the older circulation pump. This small circulation pump is used on the following models. Tiger River Spas: all models. Hot Spring Spas: 1996 to current. Limelight Spas: 2008 to Current. Replaces part number 73588 (older version SilentFlo 5000). The new E5 circulation pump is designed to replace your SilentFlo 5000 with no retrofits to your tub. Installation instructions are included. Pump does include the power cord. Tech Note: This pump should NOT be operated without water present in the spa. If a “dry run” occurs , the pump has an internal safety device that will automatically shut it down. To reset this pump simply power down the spa for 30 seconds then power it back up. Note: Some applications may require that this pump lay on its side for an easier connection to existing plumbing. It is not necessary to attach this pump to the floor of the equipment compartment. Technical Specs: 115volts/60hz/35 watts (6,000 Gallons every 24 hours). Removal of old pump. Disconnect power to the spa. Access the equipment compartment. Unplug the circulation pump from the control box. If the spa is filled with water, clamp the circulation pump inlet and outlet tubing with Hose Clamp Pliers or insert wine bottle corks into the ends of the tubing. Remove the bonding wire and base bracket screws. Use pliers to slide the spring clamps located on the inlet and outlet fittings back onto the vinyl tubing. Remove the vinyl tubing from the pump inlet and outlet fittings. Disconnect the electrical cord for the old pump. Take note of the electrical hookup. Installation of the new pump. Install the original electrical cord onto the new pump. Reverse steps 3 to 7 of the Circulation Pump Removal instructions. Check for water leaks. Reconnect power to the spa. Perform a water flow test. Check for any air in the plumbing lines. If air does not clear, bleed off the air at the closest tubing clamp. Reinstall the equipment compartment door. On ORDERS of any TWO (2) Items Totaling. See listings for details. DONT SEE AN ITEM? Subscribers to our store and receive “Private Subscriber Discounts” news-blasts. Let us know if you need product overseas or across borders. We’ll see what we can do (no chemicals sales internationally — only parts, accessories, miscellaneous)! These are the buyers responsibility. We aim to please our goal is to get you back in hot water, enjoying your spa! The item “Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427″ is in sale since Sunday, June 05, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spaguys247″ and is located in Prescott, Arizona. This item can be shipped to United States.

  • Brand: Watkins
  • MPN: 74427
  • Model: HotSpring
  • Product Type: Pool & Spa Parts & Accessories
  • Spa and Hot Tubs: Circulation Pump
  • Pool Safety Products: Pump
  • Part Number: 74427
  • old part number: 73588
Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427
Oct 24th, 2015 by admin
Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427


Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427


Watkins Item # 74427 : Silent-Flo 5000 E5 – NEW Circulation Pump. This is a brand-new E5 circulation pump (part number 74427) from Watkins manufacturing – this is not a rebuilt part. This new model uses less electricity and moves more water per minute than the older circulation pump. This small circulation pump is used on the following models. Tiger River Spas: all models. Hot Spring Spas: 1996 to current. Limelight Spas: 2008 to Current. Replaces part number 73588 (older version SilentFlo 5000). The new E5 circulation pump is designed to replace your SilentFlo 5000 with no retrofits to your tub. Installation instructions are included. Pump does include the power cord. Tech Note: This pump should NOT be operated without water present in the spa. If a “dry run” occurs , the pump has an internal safety device that will automatically shut it down. To reset this pump simply power down the spa for 30 seconds then power it back up. Note: Some applications may require that this pump lay on its side for an easier connection to existing plumbing. It is not necessary to attach this pump to the floor of the equipment compartment. Technical Specs: 115volts/60hz/35 watts (6,000 Gallons every 24 hours). Removal of old pump. Disconnect power to the spa. Access the equipment compartment. Unplug the circulation pump from the control box. If the spa is filled with water, clamp the circulation pump inlet and outlet tubing with Hose Clamp Pliers or insert wine bottle corks into the ends of the tubing. Remove the bonding wire and base bracket screws. Use pliers to slide the spring clamps located on the inlet and outlet fittings back onto the vinyl tubing. Remove the vinyl tubing from the pump inlet and outlet fittings. Disconnect the electrical cord for the old pump. Take note of the electrical hookup. Installation of the new pump. Install the original electrical cord onto the new pump. Reverse steps 3 to 7 of the Circulation Pump Removal instructions. Check for water leaks. Reconnect power to the spa. Perform a water flow test. Check for any air in the plumbing lines. If air does not clear, bleed off the air at the closest tubing clamp. Reinstall the equipment compartment door. On ORDERS of any TWO (2) Items Totaling. See listings for details. DONT SEE AN ITEM? Subscribers to our store and receive “Private Subscriber Discounts” news-blasts. Let us know if you need product overseas or across borders. We’ll see what we can do (no chemicals sales internationally — only parts, accessories, miscellaneous)! These are the buyers responsibility. We aim to please our goal is to get you back in hot water, enjoying your spa! The item “Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 PN 74427″ is in sale since Thursday, July 09, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spaguys247″ and is located in Prescott, Arizona. This item can be shipped to United States.

  • Brand: Watkins
  • Model: HotSpring
  • MPN: 74427
  • Product Type: Pool & Spa Parts & Accessories
  • Spa and Hot Tubs: Circulation Pump
  • Pool Safety Products: Pump
  • Part Number: 74427
  • old part number: 73588
E5 Circ Pump, HotSpring, Hot Spring, Silent Flo
Dec 9th, 2014 by admin
E5 Circ Pump, HotSpring, Hot Spring, Silent Flo


This laing e5 circulation pump is the official replacement for all previous one and two speed circulation pumps. If you need a circulation pump, this is the pump you need. The new e5 replaces the watkins silentflo® 5000 and silentflo 5002 circulation pumps on all hot spring and tiger river spa models from 1986 to 2009. The e5 was introduced in march of 2008 as the premier upgrade/replacement circulation pump. The compact size and flexible positioning (can mount on its side or vertical on the sidewall of the equipment compartment) has won it favor with hot spring dealers worldwide. This little jewel uses less electricity and moves more water per minute than all previous silentflo pumps. When you refill your spa and power it up this “next generation” magnetic drive, it slowly ramps up to insure that it’s well primed with water. The position of the suction/inlet is 1-11/16 from the floor which is the same as the silentflo 5000 & silentflo 5002. The return/discharge is 4-1/4 off the floor same which is also the same as the silentflo 5000 & 5002. This flexible pump can also mount on its side without the need to secure it to the floor of the equipment compartment with the attached bracket. The impeller is accessible simply by unscrewing the top ring of the pump for easier cleaning if needed. This circulation pump draws water through the circulation pumps filter (1989 forward spas) and then pushes it through the heater, ozone injector (if equipped) and back into the spa through the heater return fitting or floor drain. It circulates twenty percent more gallons per minute than the silentflo 5000 yet uses nearly half the wattage. Please note that you will need to save the cord from your old circulation pump.The item “E5 Circ Pump, HotSpring, Hot Spring, Silent Flo” is in sale since Monday, June 27, 2011. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jacuzzicare” and is located in Santa Fe Springs, California. This item can be shipped to United States.

Hot Spring Spa Silent Flo 5000 Circulation Pump E5
Jan 22nd, 2014 by admin
Hot Spring Spa Silent Flo 5000 Circulation Pump E5


The watkins / hot spring spa silent flo 5000 circulation pump has been discontinued. We will be sending watkins’ / hot spring’s updated replacement, the. Replaces all previous versions of single speed circulation. 1 x 2″ piece clear tubing (used for older 1″ model circ pump replacement). 1 x wiring and installation instructions. This is an oem part. “ground symbol” – green wire. Is the updated version of the watkins / hot springs. Silent flo 5000 -series pumps. (the e5 will fit into the system just as the 5000-series pumps did). E5 circ pump replaces all previous versions of single speed circulation.

E5 replaces the silentflo® 5000 and all previous style. Single speed circulation pumps on all hot spring and tiger river.

Spa models from 1986 to 2009. The e5 was introduced in march of the premier upgrade/replacement circulation pump. The compact size and flexible positioning can mount vertically on the sidewall.

Of the equipment compartment has won it favor with hot spring dealers. This little jewel uses less electricity and moves more. Water per minute than its predecessor, the. When you refill your spa and power it up this next. Generation magnetic drive slowly ramps up to insure that it’s.

The position of the suction/inlet is. 1-11/16 from the floor which is the same as the silentflo 5000. The return/discharge is 4-1/4 off the floor same as the silentflo 5000. Can also mount on its side without the need to secure it to the floor.

Of the equipment compartment with the attached bracket. Accessible simply by unscrewing the top ring of the pump. Circulation pump draws water through the circulation pump filter 1989. Forward spas and then pushes it through the heater, ozone injector if. Equipped and back into the spa through the heater return fitting or.

It circulates twenty percent more gallons per minute than. The silentflo 5000 yet uses nearly half the wattage. These circulation pumps are water. Lubricated and cooled and require the presence of water at all times. These pumps should not be operated without water present in the spa. Run occurs , the pump has an internal safety device (thermal cut-off) that will. Automatically shut it down should it overheat. Simply power down the spa for 10 seconds then power it back up. (6,000 gallons every 24 hours). Disconnect power to the spa. Unplug the circulation pump from the control box. If the spa is filled with water, clamp the circulation pump. Inlet and outlet tubing with hose clamp pliers or insert wine. Bottle corks into the ends of the tubing. Remove the bonding wire and base bracket screws.

Use pliers to slide the spring clamps located. On the inlet and outlet fittings back onto the vinyl tubing. Remove the vinyl tubing from the pump inlet and outlet fittings. Disconnect the electrical cord for the old pump. Installation of the new pump.

Install the original electrical cord onto the new pump. Reverse steps 3 to 7 of the circulation pump removal instructions. Reconnect power to the spa. Perform a water flow test.
Check for any air in the plumbing lines. Clear, bleed off the air at the closest tubing clamp. Reinstall the equipment compartment door. Replaces: pn:34378, 73491, a-05-280-502, lti p/n: 7060,70813, 73588, 73989, 73588, 37949.

Our company name is pool spa supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts?

Unsure of what you need? Give us a call, we can help! Why choose pool spa supplies? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control.

Tom can rattle off part numbers and replacements faster than you say pool spa supplies. We sure don’t get to talk about pools and spas when we go home after work, as that could bore our loved ones..

The item “Hot Spring Spa Silent Flo 5000 Circulation Pump E5″ is in sale since Tuesday, August 14, 2012. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other”.

The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can only be shipped Worldwide.

  • Brand: Watkins, Hot Springs, Tiger River, Caldera
  • Model: E5, E-5, Silentflo, Laing 115V Circ pump
  • MPN: 74427
»  Substance: WordPress   »  Style: Ahren Ahimsa