»
S
I
D
E
B
A
R
«
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v
Nov 6th, 2017 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


15″ 4kw High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 4000 watt stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.0kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v” is in sale since Wednesday, October 04, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v
Aug 2nd, 2017 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


15″ 4.0kw 4000 watt High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 4000 watt (4kw) stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. So message us if you want 3-wire and we’ll respond with cost and leadtime. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v” is in sale since Saturday, June 17, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in southern California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Sep 21st, 2016 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC. This Smartouch Digital Control comes with 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller, along with all your specs and details. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 4000 watt (4kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage with a neutral, or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. If you need a 3-wire 230 volt incoming power with NO neutral, message us please as this is a European all 230 volt system which can be built for you to your specs. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16″ tall, and 15-3/8″ wide, 5.5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Saturday, May 21, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazi_discounts” and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • MPN: smtd1000
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 4.0kW 4000 watts 230V (becomes 1kw on 115v)
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v
Aug 3rd, 2016 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


15″ 4.0kw 4000 watt High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 4000 watt (4kw) stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. So message us if you want 3-wire and we’ll respond with cost and leadtime. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v” is in sale since Saturday, May 21, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in southern California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v
Apr 15th, 2016 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v


15″ 4.0kw 4000 watt High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long x 2.25 diameter 4000 watt (4kw) stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. So message us if you want 3-wire and we’ll respond with cost and leadtime. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC NEW 115/230v” is in sale since Monday, January 25, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in southern California. This item can be shipped to United States.

  • Type: HIGH FLOW Heater 20 GPM Minimum
  • Brand: Applied Computer Controls
  • MPN: smtd1000
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Model: SMTD1000
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Oct 25th, 2015 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC



This Smartouch Digital Control comes with 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 4000 watt (4kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1kw or 1000 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16″ tall, and 15-3/8″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 4000 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Friday, October 09, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazi_discounts” and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 4.0kW 4000 watts 230V (becomes 1kw on 115v)
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Sep 20th, 2015 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


This Smartouch Digital Control comes with 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is not a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer. Message us first and we will reply. There is a spa control with a 12-1/2 long heater if you prefer a more compact unit. Takes an extra day or 2 please note. So do not order from this listing if you want 12-/12 heater, message us please. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 28 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Wednesday, August 19, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazi_discounts” and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty
Hot Tub Heater Controller Spa Control Pack ACC SMTD1000 Big Topside 115/230 5.5k
May 25th, 2015 by admin
Hot Tub Heater Controller Spa Control Pack ACC SMTD1000 Big Topside 115/230 5.5k


Hot Tub Heater Controller Spa Control Pack ACC SMTD1000 Big Topside 115/230 5.5k


Hot Tub Heater Controller Spa Control Pack ACC SMTD1000 Big Topside 115/230 5.5k


Hot Tub Heater Controller Spa Control Pack ACC SMTD1000 Big Topside 115/230 5.5k


15″ 5.5kw 5500 watt Heater, nice, large 3.25 x 7.25″ Digital Topside Display/Keypad. (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. Made in the USA. This Smartouch Digital Control comes with 15 heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Nice, LARGE 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. (Or, a smaller 2.5×5.5 Display if you message us first and ask for this). For 4-wire 240 volts or 3-wire 115 volts sources only. Not for 3-wire 230v please message if you need 3-wire 230. 3-wire is special and must be built to order, takes a couple days time, just message us about 3-wire, please. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. You can request this spa control with a 12-1/2 long heater if you prefer a more compact unit. Message us, takes an extra day sometimes. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 5500 watt stainless steel heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Hot Tub Heater Controller Spa Control Pack ACC SMTD1000 Big Topside 115/230 5.5k” is in sale since Thursday, January 01, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “the_warehouse” and is located in California. This item can be shipped to United States.

  • Country of Manufacture: United States
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Dec 30th, 2014 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


15 heater, large 3.25×7.25 digital topside display/keypad. This smartouch digital control comes with 15″ heater, large 3.25×7.25″ topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 gpm minimum. 2″ or 1-1/2″ pvc pipe size. This is not a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is not for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short ‘pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The smartouch smtd 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the smtd1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ pvc pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer. Message us first and we will reply. There is a spa control with a 12-1/2 long heater if you prefer a more compact unit. Takes an extra day or 2 please note. Message us, we will respond with exact leadtime and price. So do not order from this listing if you want 12-/12 heater, message us please. This control is for 4-wire 230v or for 115v. If you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s manual shows how to program changes into the control, but it is factory programmed, and tested by acc, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange. Designed, built and tested in the u. By acc, a rugged, proven, spa control, good tech support, good parts availability, made in california. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by applied computer controls. Acc has been building digital hot tub controls over 28 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch digital control by acc model smtd1000. 15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect amp plug and motor connectors. Air blower power cord, a short ‘pigtail’ with quick disconnect amp plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect amp plug, 18 gauge wire. Light pigtail with quick disconnect amp plug, 18 ga wire. Acc user’s manual – here is a link to view and download the manual. Be sure to add me to your.The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Saturday, November 29, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazilu123″ and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC
Oct 19th, 2014 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC


15 heater, large 3.25×7.25 digital topside display/keypad. Make us an offer ! This smartouch digital control comes with 15″ heater, large 3.25×7.25″ topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater.

Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 gpm minimum. 2″ or 1-1/2″ pvc pipe size.

This is not a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. This control above is not for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control.
You also get quick disconnect plugs and short ‘pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The smartouch smtd 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power.
Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1400 watts. From the factory the smtd1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard.

Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ pvc pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. You may request a smaller, rectangular topside display/keypad in 2.5×5.5 if you’d prefer. Message us first and we will reply. There is a spa control with a 12-1/2 long heater if you prefer a more compact unit.

Takes an extra day or 2 please note. Message us, we will respond with exact leadtime and price.

So do not order from this listing if you want 12-/12 heater, message us please. This control is for 4-wire 230v or for 115v. If you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime.

So message us if you want 3-wire, please. User’s manual shows how to program changes into the control, but it is factory programmed, and tested by acc, and ready to go as is. Control box stands 13-3/4″ tall, and 13-1/4″ wide, 3-1/2″ deep, heater is 15″ flange to flange.

Designed, built and tested in the u. By acc, a rugged, proven, spa control, good tech support, good parts availability, made in california. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by applied computer controls. Acc has been building digital hot tub controls over 28 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch digital control by acc model smtd1000. 15 5500 watt stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect amp plug and motor connectors. Air blower power cord, a short ‘pigtail’ with quick disconnect amp plug, 18/3 wire size, to splice to existing blower cord.

Ozonator cord, a short pigtail with quick disconnect amp plug, 18 gauge wire. Light pigtail with quick disconnect amp plug, 18 ga wire.

Acc user’s manual – here is a link to view and download the manual. Be sure to add me to your.The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC” is in sale since Sunday, September 14, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazilu123″ and is located in Azusa, California. This item can be shipped to United States.

  • Brand: Applied Computer Controls, ACC
  • Model: Smartouch Digital 1000 LARGE
  • Material: Non-corroding Aluminum and Stainless Steel
  • Voltage In: 115v or 230v convertible
  • Controls:: main pump, air blower, ozonator, lite
  • Heater size: 15″ 5.5kw
  • Warranty: ACC factory warranty
  • Topside: BIG display / keypad 3.25×7.25″
  • Includes:: all power cords, manual, heater, warranty

»  Substance: WordPress   »  Style: Ahren Ahimsa