86″ x 86″ (2185mm x 2185mm)Almost New Brown HOT TUB cover This was brand new and only 4 months old!!! When my hot tub packed up. I have since bought a new hot tub which is a different size so this is surplus to requirements. The photos are stock photos so you can get an appreciation of the item; there are no known marks; scuffs etc on the actual item so I think you will find it as good as new.. Its just sitting in storage in one of my outbuildings. The clips were never fastened to the hot tub so these are still integral to the cover ; I personally found a strap a more robust way of keeping the cover on the tub during strong winds. Please call 07889 767250 for further details. Foam Thickness: 5 1.5 LB foam / Type II (2) – Expanded Polystyrene Insulation: R 22.75. If you go for a flat 3 density cover this will give low insulation properties and you will get rainwater pooling on the surface. Most suppliers will only offer up to a 4/3 Ratio – Why settle for less when ours are Canadian manufactured and are 5/3 Ratio which will offer superior insulation and subsequent energy savings. Saving Seal Pillow – Reducing heat loss and Improving the efficiency of your spa. Heat has a great way of finding any route it can through your cover! The most vulnerable part of your cover is along the fold and if this area is unprotected heat will escape along the length of the fold. Our covers have a continuous heat seal pillow that runs the full length of the fold to fully insulate and keep running costs down. Don’t be fooled when you see end caps on the outer points of the fold, this is just for show! .. The pillow should run the full length of the fold to be efficient. 8 x Triple Strength Locking Straps – Built to maintain continued use. Our covers will come with both Male & Female part of the locking clip so you will be able to secure the locking straps to the relevant position on your hot tub. All covers should have l. Ockable Straps with Buckles for safety and storage. The item “Replacement Hot Tub Cover 86 x 86 in Brown High Specification” is in sale since Monday, September 3, 2018. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “carmel11968carmel” and is located in Sittingbourne. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.

• Brand: Canadian Spa Company
• Shape: Square
• Colour: Brown
• Sub-Type: Covers
• Type: Hot Tub Accessories
• Country//Region of Manufacture: Canada
• MPN: Does Not Apply

CANADIAN SPA PROLINE COVERS. BECAUSE NOT ALL HOT TUB COVERS ARE EQUAL. THE BEST QUALITY COVERS AT THE LOWEST PRICES. STOCK COVERS – DELIVERED DIRECTLY TO YOUR DOOR. FULLY SPECIFIED HIGH END COVERS. Foam Thickness: 4 1.5 LB foam / Type II (2) – Expanded Polystyrene Insulation. If you go for a flat 3 density cover this will give low insulation properties and you will get rainwater pooling on the surface. Why settle for less when ours are Canadian manufactured and are 4/3 Ratio which will offer superior insulation and subsequent energy savings. Heat Saving Steam Seal Pillow – Reducing heat loss and Improving the efficiency of your spa. Heat has a great way of finding any route it can through your cover! The most vulnerable part of your cover is along the fold and if this area is unprotected heat will escape along the length of the fold. Our covers have a continuous heat seal pillow that runs the full length of the fold to fully insulate and keep running costs down. Don’t be fooled when you see end caps on the outer points of the fold, this is just for show! .. The pillow should run the full length of the fold to be efficient. 8 x Triple Strength Locking Straps – For complete safety and storage. Our covers will come with both Male & Female part of the locking clip so you will be able to secure the locking straps to the relevant position on your hot tub. All covers should have lockable Straps with Buckles for safety and storage. Some manufactures offer locking straps as extras.. This will bump up the final price you pay. 6 x Sturdy, Reinforced Handles – Triple folded reinforced vinyl backed up with double-stitched seams for the sturdiest of handles end and side. The positioning and the amount of handles will greatly enhance the operating experience of your cover. Our handles are positioned so at any one time you will be able to access and grip two handles to ensure ease of cover operation. Some manufactures offer handles as extras.. 4 mil Poly Wrap Vapour Moisture Barrier – The Plastic wrap prevents moisture from reaching the foam core. Insulating Polystyrene Core – Our expanded polystyrene has top-rated insulation properties. Our 4/3 ratio foam core’s tapered design gives optimum heating and insulation whilst the taper keeps rainwater off the spa cover. The insulating foam inside the cover is vacuum sealed with a 4 mil. Poly wrap Vapour Barrier to increase the longevity of the cover and retain the heat. The Vapour/Moisture Barrier will prevent water ingress from above elements and water vapour from below. This will stop your cover getting waterlogged and heavy. Marine Grade UV Protected Vinyl. Mildew treated face and back. Drainage Tough Bottom – To Ensure the durability of the cover. The bottom of the cover is manufactured out of mildew inhibiting vinyl. Fitted with drainage grommets to prevent moisture deterioration and provides minimal water absorption. Durable Reinforced Hinge – The Aluminium channel reinforcement at the cover hinge adds strength and durability. An Aluminium channel is fixed down the centre of the cover to provide extra strength and stability when opening the cover. The material we use avoid any possible rusting and strengthens the centre of your cover. Insulating Protective Skirt Our covers come with a 5 skirt to further enhance the insulation qualities and provides protection against the elements. Over-lap seal to the centre to prevent heat loss. Colours Two different colours to choose from. ———- COMPARE US TO THE REST – WE ARE THE BEST. WHAT OTHERS SELL AS OPTIONAL EXTRAS ALL OUR COVERS ARE FULLY FEATURED AND ARE INCLUDED AS STANDARD AT NO ADDITIONAL COST. Featuring 4>3 “ratio quality – 4″ core thickness for top insulation properties, tapering to 3 to allow rainwater run off. Designed to stand up to extreme weather conditions, warm or cold, rainy, snowy, or dry. If you want a first-rate hot tub cover at a great price, Canadian Spa Proline Covers are your best choice. NEED ASSISTANCE – 01293 812044. The item “Replacement Hot Tub Covers Various Sizes In Stock High Specification” is in sale since Friday, August 18, 2017. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “mr_spa” and is located in Redhill, Surrey. This item can be shipped worldwide.

• Sub-Type: Covers
• Shape: Square
• Type: Hot Tub Accessories
• MPN: Does Not Apply
• Brand: Canadian Spa Company
• Country//Region of Manufacture: Canada