(1) Thermal Wrap Heat Jacket: Pre-installed on motor (top port on Thermal Wrap is plugged and not used for Softub applications). Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. 1 HP, 230 Volts, 50HZ, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket.
Softub Hot Tub Pump Replacement. Typically used in “European” markets. 1 HP, 230 Volts, 50HZ, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : US Motors (AGH10FL1) Horse Power: 1 Service Factor 1.0 (Often labeled 1.5hp SPL) Volts: 220-240 Amps: 6.0/6.3 RPM: 2850/3450 Frame: 48Y – Thru Bolt W/Base. Pump: (pre-installed on motor) Mfg: Balboa/Vico. 1 HP (1.5HP SPL) 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/split unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action.
Softub Hot Tub Pump Replacement – Typically used in European markets. 1 HP, 230 Volts, 50HZ, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : US Motors (AGH10FL1) Horse Power: 1 Service Factor 1.0 (Often labeled 1.5hp SPL) Volts: 220-240 Amps: 6.0/6.3 RPM: 2850/3450 Frame: 48Y – Thru Bolt W/Base. Pump: (pre-installed on motor) Mfg: Aqua-Flo P/N. 1 HP (1.5HP SPL) 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/split unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Pump 1HP 230 Volts, 6.0 Amps, 1 Speed withThermal Wrap replaces coil wrap” is in sale since Tuesday, July 30, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped worldwide.
MSPA USA Exotic 4-Person 118-Jet Bubble Spa. Golden tread embossed Mspa logo on the spa cover. Upgraded heat preservation foam mat included. 118 – 132 air jets release thousands of bubbles that surround, support and massage the body. Variable speed blower lets you adjust massage intensity between 3 levels. Can be used in any temperature. Water Capacity: 184 Gallons. Number of Jets: 118. The item “4-Person 118-Jet Bubble Spa Inflatable Hot Tub Massage Jacuzzi withThermal Cover” is in sale since Tuesday, November 7, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jp_stores” and is located in Los Angeles, California. This item can be shipped to United States.
X- Spadition & X-Calibur Hot Tub Pump 1HP (1.5 SPL) with Pre-Installed “Thermal Wrap” Heater Jacket. Original Pump with Heat Jacket used in both X-Spadition and X-Calibur hot tubs manufactured by Quantum Spas of Northwest Florida. The X-Spa and X-Calibur models were originally supplied with our Thermal Wrap Heat Jacket. Motor Description: Mfg: Century HP: 1 – Service factor 1.0 (1.5hp SPL) RPM: 3450 Single Speed 115 Volts, 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL10HSDCS 1 HP (1.5HP SPL) 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. This pump can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “X-Spadition Hot Tub Pump, 1hp, 1.5 SPL, Ultra Jet 1.5 withThermal Wrap Heat Jacket” is in sale since Wednesday, February 10, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
