»
S
I
D
E
B
A
R
«
HotSpring Tiger River Spas HEATER 6 KW NO FAULT 73790 Watkins
Sep 11th, 2018 by admin
HotSpring Tiger River Spas HEATER 6 KW NO FAULT 73790 Watkins


This 2010 No-Fault PDR Titanium Heater is the newest factory upgrade replacement heater from the makers of Hot Springs spas. Its double-pass sleek design replaces all previously discontinued heater styles. The double-pass feature efficiently heats the water in two stages and oh what a perfect job it does! Now factory approved and warrantied for all 115 volt 1.5kW and 230 volt – 6kW installations for all 1995-now Hot Spring and Tiger River spa models. Your existing 3/4 vinyl tubing will attach to this heater with no worries. The thermistors have different thread sizes to insure they can’t accidentally be reversed when re-installing them into this new PDR heater. The also have different tips on the ends of the wire to insure they can’t accidentally be plugged into the wrong port on the IQ Control Box. In most applications, the heater is connected directly inside the spas control box. If your existing heater plugs in to the bottom of your control box, you may need the appropriate adapter. Note: If your existing heater has an additional wire plugged into the IQ2020 main board, you will need to either order the PDR heater with the built-in pressure switch (72795) or add a Flow Status Jumper (72768) to P34 on the main board. Using the heater with a built-in pressure switch is recommended. The item “HotSpring Tiger River Spas HEATER 6 KW NO FAULT 73790 Watkins” is in sale since Wednesday, June 6, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “zdmap” and is located in Long Beach, California. This item can be shipped worldwide.

  • 6kw PDR Heater: Watkins
  • Part Number: 73790
  • Kilowatts: 1500/6000
  • Model: HotSpring
  • MPN: 73790
  • Brand: Watkins
  • Product Type: Heaters & Heating Systems
  • heaters – power source: Electric
Tour A Beautiful In Ground Hot Tub And Pool From Elite Pools
Sep 11th, 2018 by admin

Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED
Sep 11th, 2018 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


This listing includes a free LED-10 light bulb, a color changing bulb to add some fun to your tub! Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC. The SMTD1000 is unique, unlike other spa controls it does not rely on small motherboard relays to carry the 23 amp load to the heater, it has a large contactor switching the heater, see inset photo. This eliminates the most common cause of board failure, having the heater relay fail. A great feature that only the SMTD 1000, 2000, and 3000 controls have. This Smartouch Digital Control comes with 15″ high flow 2″ heater, Large 3.25×7.25 Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller, along with all your specs and details. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16″ tall, and 15-3/8″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual. Manual and Programming Guide can be viewed and printed on the ACC-Spas website. The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED” is in sale since Wednesday, August 8, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazi_discounts” and is located in Azusa, California. This item can be shipped to United States.

  • Model: 1000
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • MPN: SMTD1000
  • Brand: ACC
  • Non-Domestic Product: No
»  Substance: WordPress   »  Style: Ahren Ahimsa