With a SaluSpa Tahiti AirJet in your backyard, you wont have to travel far for a warm and relaxing massage after a long day. Setting up this spa is an easy process. Pick a level surface, attach the pump and watch as it inflates. The digital control panel allows you to heat the water up to 104F (40C) and control the flow of massaging bubbles. This spa comes equipped with the AirJet system, which is 60 slots in the bottom that release air bubbles to surround you in a soothing massage, and a Power Saving Timer that allows you to control the temperature of your spa up to 72 hours in advance. Just set it in the morning, and the spa will be nice and hot by the time you home from work. For added ambiance, the Tahiti comes with a battery-powered LED light that alternates between 7 different colors and a mosaic pool liner. This spa was designed with a soft, insulated floor that doubles as comfy seat. The outer layer of the spa walls are made to last with our Tritech material – 3 layers of heavy-duty PVC and polyester – to ensure premium durability. The Tahiti comes with a reinforced cover to hold in heat when the spa isnt in use, a pump with an integrated water filtration system, and a ChemConnect dispenser to provide a stable, evenly-dispersed level of chlorine. Digital control panel heats water up to 104F (40C). Soothing AirJet system – 60 slots release air bubbles to surround you in a relaxing massage. Power Saving Timer allows you to control the temperature of your spa up to 72 hours in advance. Battery-powered LED light adds ambiance. Outer walls made of Tritech material, 3 layers of heavy-duty PVC and polyester. Fast and easy setup using the included spa pump (110-120V, supplied with a residual current device – rated residual operating current not exceeding 6mA). Reinforced cover has safety lock clips and holds in heat when the spa isnt in use. Integrated water filtration system. ChemConnect dispenser evenly disperses a stable level of chlorine. User capacity: 2-4 adults. Water capacity (80%): 177 gal. Set includes a pool liner, a pool cover, a spa pump, two filter cartridges (VI), a ChemConnect dispenser, an LED light and a repair patch. The item “Coleman SaluSpa 71 x 26 Inflatable Tahiti Airjet Hot Tub Spa 4-Person Jacuzzi” is in sale since Wednesday, July 31, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “barat215″ and is located in Muldrow, Oklahoma. This item can be shipped to United States.
Laing Ecocirc E10-NSHN1W-19 1 Barb Circ. Pump 115V The E-10 is the updated version of the Laing SM-1212-NHW-19-1 Barb Circ. Pump 115V (The E10 will fit into the system just as the SM1212 did) Barbed Connection 1. Plumbing requirements are the same. Check your old pump to specify if you are looking for 115 or 230 volts. (your old pump label will specify). SM909NHW-14 1 Barb 115V. SM1212NHW-19 1 Barb 115V. SM1212NHW-21 1 Barb 115V The Ecocirc auto and vario were designed with the highly efficient electronically commutated permanent magnet motor (ECM technology). Our revolutionary pump is designed to consume 40% less energy. Added variable speed technology offers further power savings. The E10 pump is compact and lightweight, less than 5 lbs. It is whisper quiet and programmable designed with the latest EC technology. The flow rate dependent on the differential pressure control, adjusts the pump performance continuously and automatically to the requirements of the system. Get 98 watts of performance for only 65 watts of power. Domestic or international 50 or 60Hz same high flow. Consumes 40% less energy. Lightweight, less than 5 lbs. Open Impeller – Resistant to Clogging. ¾ and 1 Barb Suction and Discharge. ¾ MPT Suction and Discharge. Maximum Working Pressure: 50 PSI. Maximum Temperature: 140° F. Rotation: counter clockwise when. Viewed from the motor end. Electronically Commutated AC/DC/AC Spherical Motor. Canned Spherical Type Motor. 115 Volt 62 Watts 60 Hz, 3100 RPM. 230 Volt 71 Watts 60 Hz, 3200 RPM. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. We sure don’t get to talk about pools and spas when we go home after work, as that could bore our loved ones. The item “Laing E10, Gatsby & Blue Ridge Spas Circulation Pump, 1 Barb, 115V 321024″ is in sale since Sunday, September 26, 2010. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other Pools & Spas”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada.
15″ 5.5kw 5500 watt High-Flow Heater, 5.5 x 2.5″ Digital Topside Display/Keypad. Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. By Spa Pumps And More. This is the outdoor rated, UV resistant, Weather resistant model in grey color, with KP-1000 topside. Note: topside front is waterproof and is meant to mount into a panel with rear protected from the weather. Rear of topside is not waterproof. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 5.5 x 2.5″ topside drops into 4.7 x 1.7″ cutout in your spa. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using wire nuts. Includes 15 inch long x 2.25 diameter stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 5.5 x 2.5″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime. The item “Outdoor Spa Control Hot Tub Heater Digital Controller Pack SMTD1000GR ACC KP1000″ is in sale since Wednesday, May 29, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.
