KP-2010 Applied Computer Controls, ACC Top Side Keypad/Display model KP2010 fit spa control systems by ACC including the ePack, SMTD1000, SMTD1500, and Compack Junior. Ribbon cable attached is 5 feet long. Now in dark gray color. Replaces the older SC-2010. 14 pin connector on end of ribbon cable, the same connector ACC has used for many years on all their SC1000, SC1500, and SC motherboards, for SMTD 1000, and ePack SMTD1500 controls, and also for the JR control. Connector measures 0.88″ wide (7/8″) x 0.23″ (1/4″) as shown in photos and is standard on all ACC controls. We also stock KP-2020tp, KP-1000, LX-1000 and all the other topsides by ACC, just ask. Spa Pumps And More. Please check out our other great deals. KP-2010 top side keypad/display, it is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. You will receive the 3.25″ x 7.25″ if you order from this listing.
Applied Computer Controls, ACC Top Side Keypad/Display model KP-2020tp fits SmarTouch spa control systems by ACC including the SMTD2000. Unipack 2000, and SMTD3000. Ribbon cable attached is 5 feet long. Now in dark gray color. Replaces SC-2020 and KP-2020. We also stock KP-2010, SC-2010, KP-1000, LX-1000 and all the other topsides by ACC, just ask. Spa Pumps And More. Please check out our other great deals. KP-2020tp top side keypad/display, it is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. You will receive the 3.25″ x 7.25″ if you order from this listing. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
More info at: Spa Pumps And More. NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 12″Tx15″Wx5D approximately. Includes the 3.25×7.25″ large BACKLIT XP-2020 topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. For more information look at Spa Pumps And More. Their part number is ePack. Alternate part number is SMTD1500. Model: ePack SMTD 1500. Display: Digital Topside Keypad 3.25″ x 7.25″. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. More details at Spa Pumps And More. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Closed 12/24 – 1/2. We will be back 1/3/23. Applied Computer Controls, ACC Top Side Keypad/Display model KP-2010 fit spa control systems by ACC including the ePack, SMTD1000, SMTD1500. Ribbon cable attached is 5 feet long. Now in dark gray color. Replaces the older SC-2010. 14 pin connector on end of ribbon cable. The same connector ACC has used for many years on all their SC100, SC1500, and SC motherboards, for SMTD 1000, and ePack SMTD1500 controls. And also for the JR control. Connector measures 0.88″ wide (7/8″) x 0.23″ (1/4″) as shown in photos and is standard on all ACC controls. We also stock KP-2020tp, KP-1000, LX-1000 and all the other topsides by ACC, just ask. Spa Pumps And More. Please check out our other great deals. KP-2010 top side keypad/display, it is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. You will receive the 3.25″ x 7.25″ if you order from this listing. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Applied Computer Controls, ACC Top Side Keypad/Display model KP-1000 fit spa control systems by ACC including the ePack, SMTD1000, SMTD1500. Ribbon cable attached is 5 feet long. Now in dark gray color. We also stock KP-2020, SC-2020, KP-2010, LX-1000 and all the other topsides by ACC, just ask. Spa Pumps And More. Please check out our other great deals. KP-1000 top side keypad/display, it is 2.5″ x 5.5″ and drops into a 1.9″ x 4.9″ cutout. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Applied Computer Controls, ACC Top Side Keypad/Display model KP-2010 fit spa control systems by ACC including the ePack, SMTD1000, SMTD1500. Ribbon cable attached is 5 feet long. Now in dark gray color. Replaces the older SC-2010. 14 pin connector on end of ribbon cable. The same connector ACC has used for many years on all their SC100, SC1500, and SC motherboards, for SMTD 1000, and ePack SMTD1500 controls. And also for the JR control. Connector measures 0.88″ wide (7/8″) x 0.23″ (1/4″) as shown in photos and is standard on all ACC controls. We also stock KP-2020tp, KP-1000, LX-1000 and all the other topsides by ACC, just ask. Spa Pumps And More. Please check out our other great deals. KP-2010 top side keypad/display, it is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. You will receive the 3.25″ x 7.25″ if you order from this listing. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Because these are built to order, please allow a few days to build and test. More info at: Spa Pumps And More. NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 12″Tx15″Wx5D approximately. Includes the 3.25×7.25″ large BACKLIT XP-2020 topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. For more information look at Spa Pumps And More. Their part number is ePack. Alternate part number is SMTD1500. Model: ePack SMTD 1500. Display: Digital Topside Keypad 3.25″ x 7.25″. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. More details at Spa Pumps And More. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
