The Jacuzzi J500 Main Mother Board is in good working condition and was removed from a Jacuzzi J500 that was being replaced as part of a renovation project.

Volume Capacity: 158 gal. Dimensions: 5 x5x2 ft. (1.5×1.5×0.7 m). Power Cord Length: 11 ft. 1 x Inflatable Hot Tub. 1 x Hot Tub Cover. 2 x Filter Cartridges. 2 x Filter Covers. 2 x Repair Patches. 1 x Base Cloth. 2 x Buckle Keys. 1 x Instruction Manual. LUXURY SPA AT HOME: This inflatable hot tub heats up to 158 gallons to 104°F at a rate of 1-3°F per hour depending on the surrounding temperature and creates rejuvenating bubbles with just the right intensity from its 120 high-powered jets to offer abundant relaxation. IDEAL FOR 2-4 ADULTS: Our 5′x5′ square hot tub accommodates up to four adults, letting you and yours fully enjoy your leisure time at home, on your patio, in the backyard, or elsewhere. USER-FRIENDLY DESIGN: This mini pool includes everything you need for a true-to-spa experience; an intuitive control panel for easy operation, a detachable locking cover to keep your tub clean between uses, 2 fresh filter cartridges to keep the water fresh, and a sturdy valve for fast drainage. EASY SETUP & TRANSPORT: Our portable hot tub is easy to set up thanks to the clear instructions; the provided electric air pump inflates it in under 8 minutes; and the convenient side handles make it a breeze to transport once inflated. DURABLE CONSTRUCTION: This heated spa tub is made of puncture proof laminated PVC for ultimate support, durability, and comfort, ensuring that you’ll enjoy soothing soaks for years to come. Two filter cartridges come included for timely replacement, each capable of purifying a full tub in 45 minutes, allowing you to keep the water clean and fresh all year round. Effortlessly adjust the settings to your needs without getting out of the tub thanks to the handy and simple control panel. Our spa tub’s 120 high-powered jets create a soothing whirlpool of rejuvenating bubbles to offer a therapeutic full body massage. If the weight of your order exceeds 150 lbs. Thank you very much! Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. All emails will be responded to within 12-24 hours.

More info at : Spa Pumps And More. NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. From Spa Pumps And More, please check out our other great deals. Comes with KP-1000 top side keypad/display, it is 2.5″ x 5.5″ and drops into a 1.7″ x 4.7″ cutout. You will receive the 2.5″ x 5.5″ if you order from this listing. For more information look at Spa Pumps And More. Their part number is SMTD1500. Alternate part number is ePack. Model: ePack SMTD 1500. Display: Digital Topside Keypad 2.5×5.5. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. There is a larger top side available at slightly higher cost, it is the KP-2010 and is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. If you are interested in this, see our other listing for the ePack with KP-2010 top side. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. More details at Spa Pumps And More.

New – Outer box is distressed.

Upgrade your spa control system with the Gecko Alliance IN. YJ-3 hot tub controls. This model is compatible with a flow thru heater and features a keypad for easy adjustment. Manufactured in the United States, it is designed to fit most standard spa models. Enjoy a comfortable and relaxing spa experience with this reliable and efficient control system.

Up for sale is a Vita Spa Selectron Plus Topside Control S50BC20021. It appears to be in good condition. It was removed from a working environment. Please look at the pictures for the exact condition of this item.

1000s of Everyday Products. Vehicle Parts & Accessories. Sign up to receive special insider notifications of our latest deals, promotions, and new listings! SaluSpa Boracay AirJet Round Inflatable Spa w/ App Control, Gray (Open Box). Item is open box, unharmed and in very good condition. All accessories or parts are included with the item. Round spa accommodates 2 to 4 adults for a calming bubbles massage experience in the comfort of your backyard. Compatible with the Bestway Smart Hub App that lets you control the temperature, timer, filter, and massage system from the palm of your hand. Easy-to-reach digital control panel allows you to adjust the temperature and heat the water up to 104 degrees Fahrenheit. Features 2 intensity levels and 120 air jets that release warm air into the water, surrounding you with a calming bubble massage. Includes cover, pump, ChemConnect dispenser, filter cartridge (VI), and repair patch. DuraPlus material is stress tested to resist tears and minimize stretching better than traditional PVC. Features a Freeze Shield automatic heating function to prevent inner components from freezing during colder temperatures for long-lasting use. Power saving timer allows you to control the temperature of your spa up to 40 days in advance. Reinforced cover has safety lock clips and holds in heat when the spa isn’t in use. ChemConnect chemical dispenser maintains clean, healthy water by evenly dispensing a stable level of chlorine; Integrated water filtration system for easy pool maintenance. Fast and easy setup using the included spa pump; Spa pump includes cup holders for convenient storage. Inner size: 52 inches. Water Capacity: 177 gallons. Filled weight: 1,534 pounds. Water flow: 320 gallons per hour. Heating system: Approximately 2 to 3 degrees Fahrenheit per hour. Max heat capability: 104 degrees Fahrenheit (40 degrees Celcius). Inflated dimensions (L x W x H): 70.87 x 70.87 x 25.98 inches. Weight: 57.84 pounds. Product Condition: Open Box – Like new. Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! Sign Up for Our.

More info at Spa Pumps And More. 15″ 5.5kw High-Flow 2″ Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5″ Topside Display/Keypad if you request this before you order). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. From Spa Pumps And More. Nice large contactor in the SMTD1000 switches the 24 amp heater on-off, this is a huge advantage over all other control brands that have a tiny relay on the motherboard to do the switching. For more information look at Spa Pumps And More. Their part number is SMTD1000. 230v incoming 4-wire with neutral (NOT compatible with 3-wire no neutral power source). 230v to 2 high flow heater. 115v to main 2-speed pump (can be changed to 230v). 115v to air blower. NO CIRCULATION PUMP OUTPUT ON THIS MODEL. Display: Digital Topside Keypad 3.25″ x 7.25″. Heater: High Flow 2 15 inch 5kw. Dimensions: 14.5T x 15.4W x 3D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. The smaller one is 2.5×5.5″ and drops into a 1.7×4.7″ cutout hole. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is NOT for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, and we will advise cost and lead time, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM, it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. And it does not have an output for a circ pump. Message us if you need a circ pump system and we can advise cost and lead time. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using wire nuts. Includes 15 inch long x 2.25 diameter 5500 watt stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 3″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime.

Ended up not needing. Do not have original box. I do my very best to describe all items at the time of the listing (see my feedback). Feel free to always message me if you have any specific questions or need additional photos, I’m here to help. Also, to help the environment by eliminating waste I always try to upcycle boxes and packing material when available.

Marquis Spa Control Panel TP700.