Water Heater for Whirlpools Flow Type made in Western Europe. Different outputs are available. With the following basic features. System of protection: IP X5. Voltage: 220 – 240V 50/60Hz. Overall length: 217 mm (without unions). Suitable for a replacement of a new system. 2 unions Ø 50 mm will be supplied FOC. These are not featured on the image. Please specify the output required! The item “Whirlpool heater flow type straight (500W, 1000W and 2000W)” is in sale since Friday, April 5, 2019. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “ourbathroom-dot-com” and is located in London. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Dominican republic, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam, Cayman islands, Russian federation.
Compact Series Whirlpool Bath Heater. Comes with 3/4″, 1″ & 1.5 PVC Tail Piece Unions. 1.9 stainless housing. 7 flange to flange length. 3 Foot power Cord. 120V, 1.0kW/1000 Watts. Best up to 100 Gallon bath. This heater will not work on American Standard, Kohler or Jacuzzi baths with factory installed heater blanks. Smart Thermostat Insures heating element operates only when the water temperature drops below 102.5°F. Provides constant, comfortable water temperature. Certified Real Heat Technology 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent High Limit Switch The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety. Heater On Light Provides a visual indicator that the heater is operating and raising the temperature of the water. 100% Quality Assurance Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in America Manufactured in Corona, California by a dedicated group of quality minded men and women. This unit installs on the Pressure Side , heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own GFCI outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! We accept payments from Verified U. If you order multiple items there is a good chance you will receive more than one package. Please note the following. If gaskets, O-Rings & Seals are removed from their sealed packaging. If parts show evidence of wear, contact with water or chemical damage. Items with Double Sided Tape, Protective Face Plastics or factory coverings show evidence of these items being removed. Why the strict policy? – We do not sell used parts! If you’ve installed, attached, hooked up… Any part it is considered used. Tools Safety items, including but not limited to sensors, switches & suctions. We support manufactures warranties for the items we sell. Electrical items including but not limited to blowers, controls, elements, heaters, pumps, switches and sensors will only be warrantied if they are installed by certified spa technicians. Replacement components are only sent out after an item has been deemed defective by the manufacture repair facility. Add me to your Favorite Sellers. Track Page Views With. Auctiva’s FREE Counter. The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Sunday, December 2, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped worldwide.
> Shower Door Seals. > Shower Door Rollers. > Heads & Handsets. > Riser Rails & Hoses. > Shelf & Brackets. > Shower Body Jets. > Seats & Benches. > Drainage & Waste. > Fixtures & Fittings. > Speakers & Fans. > Shower Mixer Valves. > Bath Air & Water Jets. > Taps & Thermostats. > Bath Pipes & Fixtures. > Waste & Drainage. > Pumps & Sensors. > Sauna Bucket & Ladle. > Temperature & Timer. > Audio & Speakers. Part Number (SKU): LX-H10-R3-HEATER-T. Speed Revolutions / Minute. Noise Level dB (A). Recommended Water Depth (metres). Water Volume Heating Capacity (Gallons). Water Volume Heating Capacity (Litres). Single Person Whirlpool Bath / Spa. “This is the “”T” shaped version of the LX H10 water heater. Please see photos for a reference to what the T shaped heater looks like. Includes a pressure switch. Any items that arrive faulty must be reported to our customer service team within 48 hours. If a direct replacement is not available, an alternative will be offered. The packaging for this item is a’large parcel’. We will do our best to assist. Di Vapor takes great pride in providing unrivalled customer service combined with high quality products? Ensuring that you are satisfied whilst providing a positive shopping is our priority. We are confident that we will deliver beyond your expectations and that you? Ll be more than satisfied with your purchasing experience with Di Vapor. However, we also understand that sometimes mistakes can happen or delays out of our control can reflect badly on your shopping experience. We will do our absolute best to ensure that any issues are resolved quickly and efficiently. We are constantly striving to provide a reliable service and product range that our customers keep coming back for? POPULAR ITEMS YOU MAY ALSO LIKE. The item “LX H10-R3 Water Heater 1000W (1kW) Hot Tub Spa Whirlpool Bath Flow Type” is in sale since Friday, February 26, 2016. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “divapor” and is located in Solihull. This item can be shipped worldwide.
> Shower Door Seals. > Shower Door Rollers. > Heads & Handsets. > Riser Rails & Hoses. > Shelf & Brackets. > Shower Body Jets. > Seats & Benches. > Drainage & Waste. > Fixtures & Fittings. > Speakers & Fans. > Shower Mixer Valves. > Bath Air & Water Jets. > Taps & Thermostats. > Bath Pipes & Fixtures. > Waste & Drainage. > Pumps & Sensors. > Sauna Bucket & Ladle. > Temperature & Timer. > Audio & Speakers. Part Number (SKU): LX-H10-R2-HEATER-L. Speed Revolutions / Minute. Noise Level dB (A). Recommended Water Depth (metres). Water Volume Heating Capacity (Gallons). Water Volume Heating Capacity (Litres). Single Person Whirlpool Bath / Spa. “This is the “”L” shaped version of the LX H10 water heater. Please see photos for a reference to what the L shaped heater looks like. Includes a pressure switch. Any items that arrive faulty must be reported to our customer service team within 48 hours. If a direct replacement is not available, an alternative will be offered. Orders can also be completed by speaking to a member of our customer service team on 08454 650 800? The packaging for this item is a’large parcel’. We will do our best to assist. Di Vapor takes great pride in providing unrivalled customer service combined with high quality products? Ensuring that you are satisfied whilst providing a positive shopping is our priority. We are confident that we will deliver beyond your expectations and that you? Ll be more than satisfied with your purchasing experience with Di Vapor. However, we also understand that sometimes mistakes can happen or delays out of our control can reflect badly on your shopping experience. We will do our absolute best to ensure that any issues are resolved quickly and efficiently. We are constantly striving to provide a reliable service and product range that our customers keep coming back for? Di Vapor treats your privacy and security with the utmost importance. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards. POPULAR ITEMS YOU MAY ALSO LIKE. The item “LX H10-R2 Water Heater 1000W (1kW) Hot Tub Spa Whirlpool Bath Flow Type” is in sale since Friday, February 26, 2016. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “divapor” and is located in Solihull. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
Compact Series Whirlpool Bath Heater. Comes with 3/4″, 1″ & 1.5 PVC Tail Piece Unions. 1.9 stainless housing. 7 flange to flange length. 3 Foot power Cord. 120V, 1.0kW/1000 Watts. Best up to 100 Gallon bath. This heater will not work on American Standard, Kohler or Jacuzzi baths with factory installed heater blanks. Smart Thermostat Insures heating element operates only when the water temperature drops below 102.5°F. Provides constant, comfortable water temperature. Certified Real Heat Technology 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent High Limit Switch The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety. Heater On Light Provides a visual indicator that the heater is operating and raising the temperature of the water. 100% Quality Assurance Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in America Manufactured in Corona, California by a dedicated group of quality minded men and women. This unit installs on the Pressure Side , heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own GFCI outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! We accept payments from Verified U. If you order multiple items there is a good chance you will receive more than one package. Please note the following. If gaskets, O-Rings & Seals are removed from their sealed packaging. If parts show evidence of wear, contact with water or chemical damage. Items with Double Sided Tape, Protective Face Plastics or factory coverings show evidence of these items being removed. Why the strict policy? – We do not sell used parts! If you’ve installed, attached, hooked up… Any part it is considered used. Tools Safety items, including but not limited to sensors, switches & suctions. We support manufactures warranties for the items we sell. Electrical items including but not limited to blowers, controls, elements, heaters, pumps, switches and sensors will only be warrantied if they are installed by certified spa technicians. Replacement components are only sent out after an item has been deemed defective by the manufacture repair facility. Add me to your Favorite Sellers. The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Sunday, August 07, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped worldwide.
We have access to over 10,000 pool and spa parts visit us online & Find what you need! Compact Series Whirlpool Bath Heater. Comes with 3/4″, 1″ & 1.5 PVC Tail Piece Unions. 1.9 stainless housing. 7 flange to flange length. 3 Foot power Cord. 120V, 1.0kW/1000 Watts. Best up to 100 Gallon bath. Smart Thermostat – Insures heating element operates only when the water temperature drops below 102.5°F. Provides constant, comfortable water temperature. Certified Real HeatT Technology – 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent High Limit Switch – The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety. Heater “On” Light – Provides a visual indicator that the heater is operating and raising the temperature of the water. 100% Quality Assurance – Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in America – Manufactured in Corona, California by a dedicated group of quality minded men and women. This unit installs on the Pressure Side , heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own GFCI outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! Items unpaid in 7 days will received a friendly “Unpaid Item” reminder, items not paid for in 14 days will result in an Unpaid item Claim filing. If you need your part Faster? If an item is damaged in transit please notify the courier which delivered it and them notify us. Add me to your Favorite Sellers. The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Friday, October 23, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Japan, to Australia.
We have access to over 10,000 pool and spa parts visit us online & Find what you need! Compact Series Whirlpool Bath Heater. Comes with 3/4″, 1″ & 1.5 PVC Tail Piece Unions. 1.9 stainless housing. 7 flange to flange length. 3 Foot power Cord. 120V, 1.0kW/1000 Watts. Best up to 100 Gallon bath. Smart Thermostat – Insures heating element operates only when the water temperature drops below 102.5°F. Provides constant, comfortable water temperature. Certified Real HeatT Technology – 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent High Limit Switch – The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety. Heater “On” Light – Provides a visual indicator that the heater is operating and raising the temperature of the water. 100% Quality Assurance – Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in America – Manufactured in Corona, California by a dedicated group of quality minded men and women. This unit installs on the Pressure Side , heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own GFCI outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! Items unpaid in 7 days will received a friendly “Unpaid Item” reminder, items not paid for in 14 days will result in an Unpaid item Claim filing. If you need your part Faster? If an item is damaged in transit please notify the courier which delivered it and them notify us. Add me to your Favorite Sellers. The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Wednesday, September 02, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Japan, to Australia.
We have access to over 10,000 pool and spa parts visit us online & find what you need! Compact series whirlpool bath heater. Comes with 3/4″, 1″ & 1.5 pvc tail piece unions. 7 flange to flange length. 3 foot power cord. Best up to 100 gallon bath. Smart thermostat – insures heating element operates only when the water temperature drops below 102.5°f. Provides constant, comfortable water temperature. Certified real heatt technology – 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent high limit switch – the ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the intelligent high limit switch can be manually reset assuring you continued safety. Heater “on” light – provides a visual indicator that the heater is operating and raising the temperature of the water. 100% quality assurance – every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in america – manufactured in corona, california by a dedicated group of quality minded men and women. This unit installs on the. Heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own gfci outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! Items unpaid in 7 days will received a friendly “unpaid item” reminder, items not paid for in 14 days will result in an unpaid item claim filing. If you need your part faster? If an item is damaged in transit please notify the courier which delivered it and them notify us.The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Friday, February 20, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped to North, South, or Latin America and to all countries in Europe and to Japan and to Australia.
We have access to over 10,000 pool and spa parts visit us online & find what you need! Compact series whirlpool bath heater. Comes with 3/4″, 1″ & 1.5 pvc tail piece unions. 7 flange to flange length. 3 foot power cord. Best up to 100 gallon bath. Smart thermostat – insures heating element operates only when the water temperature drops below 102.5°f. Provides constant, comfortable water temperature. Certified real heatt technology – 100% efficient element to water heat transfer. No wasted energy consumption. Intelligent high limit switch – the ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the intelligent high limit switch can be manually reset assuring you continued safety. Heater “on” light – provides a visual indicator that the heater is operating and raising the temperature of the water. 100% quality assurance – every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability. Made in america – manufactured in corona, california by a dedicated group of quality minded men and women. This unit installs on the. Heating the water coming out of the pump on its way into the tub. Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own gfci outlet, it must not share an outlet with the pump. Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold! Items unpaid in 7 days will received a friendly “unpaid item” reminder, items not paid for in 14 days will result in an unpaid item claim filing. If you need your part faster? If an item is damaged in transit please notify the courier which delivered it and them notify us.The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Sunday, January 11, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can be shipped to North, South, or Latin America and to all countries in Europe and to Japan and to Australia.
We have access to over 10,000 pool and spa parts visit us online & find what you need! Compact series whirlpool bath heater. Comes with 3/4″, 1″ & 1.5 pvc tail piece unions. 7 flange to flange length. Best up to 100 gallon bath. Smart thermostat – insures heating element operates only when the water temperature drops below 102.5°f. Provides constant, comfortable water temperature. Certified real heatt technology – 100% efficient element to water heat transfer.
Intelligent high limit switch – the ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the intelligent high limit switch can be manually reset assuring you continued safety. Heater “on” light – provides a visual indicator that the heater is operating and raising the temperature of the water. 100% quality assurance – every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability.
Made in america – manufactured in corona, california by a dedicated group of quality minded men and women. This unit installs on the. Heating the water coming out of the pump on its way into the tub.
Most major brands whirlpool tubs should already have a 7 cut out in the plumbing to insert the heater! These heaters require their own gfci outlet, it must not share an outlet with the pump.
Bath heaters work best to maintain water temperature/ raise a f. It will take hours to heat the water from cold!
If an item is damaged in transit please notify the courier which delivered it and them notify us.The item “Jetted Whirlpool Bath Tub In-Line Water Heater 120V 1.0kW 1000W PH101-10UP” is in sale since Thursday, February 20, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartshop” and is located in Multiple Locations. This item can only be shipped to Japan.
