NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. Includes the 3.25×7.25″ large topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Spa Control Hot Tub Heater ePack Controller Big Keypad 115/230v ACC 4kw SMTD1500″ is in sale since Friday, January 11, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “warehousethirtythree” and is located in Southern, California. This item can be shipped to United States.
1 only at this special price! NEW hot tub controller, with electric heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, witn NEW 2-speed pump, 3.1 threaded connection with pair of pump unions, pump is 115 volt Motor, rated 8.8 amps 115 volts. Control comes with a set of plugs including a power cord for pump, and pigtails for air blower, light, and ozonator, and can run on 230 volt or 115 volt, it is convertible for voltages. 15″ stainless steel heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. 2-speed pump is 115v, 8.8 amps. Main control box is 11.5″Tx14″Wx4.5″D Includes the 2.5×5.5″ small topside, which requires cutout hole of 1.7 x 4.7 hole. The ribbon cable from topside to control box is 5ft long. We do not abandon our customers after the sale! We HAVE the field experience and staff to support you, our field service staff is ready to talk to you, answer questions, lend support, anytime! For repairing your portable spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! Factory default settings are setup for 230 volt power incoming, 230v to heater, 115v out to main 2 speed pump, 115v to air blower or 2nd pump, 12v out to light, 115v out to ozonator or other accessory. Like all spa controls, this is intended to be used on portable spas, mounted under the redwood skirt, not designed to sit out in the rain please note. Ships fast, in stock now. Pump, 2 speed 115v and a pair of pump union fittings. Check out my other items. Be sure to add me to your favorites list. The item “Spa Control Hot Tub Heater 230/115v 4kW ePack Controller Pack & 2 speed Spa Pump” is in sale since Tuesday, January 1, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “warehousethirtythree” and is located in Southern, California. This item can be shipped to United States.
NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. From Spa Pumps And More, please check out our other great deals. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. More info at Spa Pumps And More. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Sunday, September 30, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.
NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.
NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Thursday, January 04, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.
NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Saturday, July 08, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.
NEW hot tub controller, with electric heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, witn NEW 2-speed pump, 3.1″ threaded connection with pair of pump unions, pump is 120 volt Motor, Waterway Hi-Flo pump, control is with set of power cords for pump, air blower, light, and ozonator, 230 volt or 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. 2-speed pump is 120v, 9.5 to 10.8 amps Energy Efficient (does the work of a 12a/115v motor) with top capacitor hump. EPack now comes in blue, not black. Main control box is 11.5″Tx14″Wx4.5″D Includes the 2.5×5.5″ small topside, which requires cutout hole of 1.7 x 4.7 hole. The ribbon cable from topside to control box is 5ft long. We do not abandon our customers after the sale! We HAVE the field experience and staff to support you, our field service staff is ready to talk to you, answer questions, lend support, anytime! For repairing your portable spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! Factory default settings are setup for 230 volt power incoming, 230v to heater, 115v out to main 2 speed pump, 115v to air blower or 2nd pump, 12v out to light, 115v out to ozonator or other accessory. Like all spa controls, this is intended to be used on portable spas, mounted under the redwood skirt, not designed to sit out in the rain please note. Ships fast, in stock now. Pump, 2 speed 115v and a pair of pump union fittings. Check out my other items. Be sure to add me to your favorites list. The item “Spa Control Hot Tub Heater ePack Controller Pack & 2 speed Spa Pump NEW 115/230v” is in sale since Thursday, June 15, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “scruffyswarehouse” and is located in Southern, California. This item can be shipped to United States.
NEW hot tub controller, with electric heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, witn NEW 2-speed pump, 3.1″ threaded connection with pair of pump unions, pump is 120 volt Motor, Waterway Hi-Flo pump, control is with set of power cords for pump, air blower, light, and ozonator, 230 volt or 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. 2-speed pump is 120v, 9.5 to 10.8 amps Energy Efficient (does the work of a 12a/115v motor) with top capacitor hump. EPack now comes in blue, not black. Main control box is 11.5″Tx14″Wx4.5″D Includes the 2.5×5.5″ small topside, which requires cutout hole of 1.7 x 4.7 hole. The ribbon cable from topside to control box is 5ft long. We do not abandon our customers after the sale! We HAVE the field experience and staff to support you, our field service staff is ready to talk to you, answer questions, lend support, anytime! For repairing your portable spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! Factory default settings are setup for 230 volt power incoming, 230v to heater, 115v out to main 2 speed pump, 115v to air blower or 2nd pump, 12v out to light, 115v out to ozonator or other accessory. Like all spa controls, this is intended to be used on portable spas, mounted under the redwood skirt, not designed to sit out in the rain please note. Ships fast, in stock now. Pump, 2 speed 115v and a pair of pump union fittings. Check out my other items. Be sure to add me to your favorites list. The item “Spa Control Hot Tub Heater ePack Controller Pack & 2 speed Spa Pump NEW 115/230v” is in sale since Tuesday, May 16, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “scruffyswarehouse” and is located in Southern, California. This item can be shipped to United States.
NEW hot tub controller, with electric heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, witn NEW 2-speed pump, 3.1″ threaded connection with pair of pump unions, pump is 120 volt Motor, Waterway Hi-Flo pump, control is with set of power cords for pump, air blower, light, and ozonator, 230 volt or 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. 2-speed pump is 120v, 9.5 to 10.8 amps Energy Efficient (does the work of a 12a/115v motor) with top capacitor hump. EPack now comes in blue, not black. Main control box is 11.5″Tx14″Wx4.5″D Includes the 2.5×5.5″ small topside, which requires cutout hole of 1.7 x 4.7 hole. The ribbon cable from topside to control box is 5ft long. We do not abandon our customers after the sale! We HAVE the field experience and staff to support you, our field service staff is ready to talk to you, answer questions, lend support, anytime! For repairing your portable spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! Factory default settings are setup for 230 volt power incoming, 230v to heater, 115v out to main 2 speed pump, 115v to air blower or 2nd pump, 12v out to light, 115v out to ozonator or other accessory. Like all spa controls, this is intended to be used on portable spas, mounted under the redwood skirt, not designed to sit out in the rain please note. Ships fast, in stock now. Pump, 2 speed 115v and a pair of pump union fittings. Check out my other items. Be sure to add me to your favorites list. The item “Spa Control Hot Tub Heater ePack Controller Pack & 2 speed Spa Pump NEW 115/230v” is in sale since Thursday, April 27, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “scruffyswarehouse” and is located in Southern, California. This item can be shipped to United States.
NEW hot tub controller, with electric heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, witn NEW 2-speed pump, 3.1″ threaded connection with pair of pump unions, pump is 120 volt Motor, Waterway Hi-Flo pump, control is with set of power cords for pump, air blower, light, and ozonator, 230 volt or 115 volt, it is convertible for voltages, 15″ stainless steel heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. 2-speed pump is 120v, 9.5 to 10.8 amps Energy Efficient (does the work of a 12a/115v motor) with top capacitor hump. EPack now comes in blue, not black. Main control box is 11.5″Tx14″Wx4.5″D Includes the 2.5×5.5″ small topside, which requires cutout hole of 1.7 x 4.7 hole. The ribbon cable from topside to control box is 5ft long. We do not abandon our customers after the sale! We HAVE the field experience and staff to support you, our field service staff is ready to talk to you, answer questions, lend support, anytime! For repairing your portable spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! Factory default settings are setup for 230 volt power incoming, 230v to heater, 115v out to main 2 speed pump, 115v to air blower or 2nd pump, 12v out to light, 115v out to ozonator or other accessory. Like all spa controls, this is intended to be used on portable spas, mounted under the redwood skirt, not designed to sit out in the rain please note. Ships fast, in stock now. Pump, 2 speed 115v and a pair of pump union fittings. Check out my other items. Be sure to add me to your favorites list. The item “Spa Control Hot Tub Heater ePack Controller Pack & 2 speed Spa Pump NEW 115/230v” is in sale since Saturday, April 22, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “scruffyswarehouse” and is located in Southern, California. This item can be shipped to United States.
