»
S
I
D
E
B
A
R
«
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Feb 12th, 2020 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. From Spa Pumps And More, please check out our other great deals. Comes with KP-1000 top side keypad/display, it is 2.5″ x 5.5″ and drops into a 1.7″ x 4.7″ cutout. You will receive the 2.5″ x 5.5″ if you order from this listing. Model: ePack SMTD 1500. Display: Digital Topside Keypad 2.5×5.5. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. There is a larger top side available at slightly higher cost, it is the KP-2010 and is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. If you are interested in this, see our other listing for the ePack with KP-2010 top side. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Tuesday, December 31, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartsdistributor” and is located in Los Angeles, California. This item can be shipped to United States.

  • Country of Manufacture: United States
  • Model: ePack
  • Country/Region of Manufacture: United States
  • Type: High Flow Heater
  • MPN: smtd1500
  • Brand: Spa Pumps And More
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Jul 4th, 2019 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. From Spa Pumps And More, please check out our other great deals. Comes with KP-1000 top side keypad/display, it is 2.5″ x 5.5″ and drops into a 1.7″ x 4.7″ cutout. You will receive the 2.5″ x 5.5″ if you order from this listing. There is a larger top side available at slightly higher cost, it is the KP-2010 and is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Wednesday, May 29, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.

  • Model: ePack
  • MPN: smtd1500
  • Country/Region of Manufacture: United States
  • Brand: Spa Pumps And More
  • Type: High Flow Heater
  • Country of Manufacture: United States
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Apr 2nd, 2019 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. From Spa Pumps And More, please check out our other great deals. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. More info at Spa Pumps And More. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Thursday, February 7, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: High Flow Heater
  • Brand: Spa Pumps And More
  • MPN: smtd1500
  • Model: ePack
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY
Feb 26th, 2019 by admin
Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY


BRAND NEW SHIPS DIRECTLY FROM THE WAREHOUSE AND DELIVERS IN 3-4 WEEKS FROM ORDER WITHIN US48. FEEL FREE TO ASK ANY QUESTIONS BEFORE ORDERING. INTERNATIONAL BUYERS: PRODUCTS ARE GUARANTEED TO BE NEW AND AUTHENTIC. Multi-color LED Lighting, Bluetooth Sound System. Insulated Hard Cover with Cover Lift. Dimensions: 92.5″ L x 92.5″ W x 39.5 H. Brand: Divine Hot Tubs. Cabinet Color: Black or Brown. Dry Weight: 960 lb. Number of Jets: 115. Seating Capacity: 7 Person. Shell Color: Sterling Silver. Type of Seating: Bench Seats. Water Capacity: 440 gal. Divines ultimate hot tub experience comes to you with the Sinclair 115-jet, 7-Person spa! Divine Hot Tubs is known for state-of-the-art manufacturing quality in every stage of the build; including the shell, base, cabinet, jetting and plumbing, creating a backyard hydrotherapy experience like no other. The Sinclair offers the full-body hydrotherapy massage and features you are looking for, with plenty of room for family and friends in a 92.5 x 92.5 space. Incorporating all premium components, the Sinclair features Divines patented ProLocTM high-flow, jet systems that create improved air/water integration, improved air circulation and a more complete massage. From our zero-gravity lounge design, which allows for the natural flotation of the human body, to our full-body ProLocTM jetted seating, you are in absolute control of your personal hydrotherapy experience, no matter which chair you choose! Divine Hot Tubs patented fabrication materials and processes have been developed to provide you with high-quality spa construction and features youll love. Made-by-hand in the U. The Sinclair comes jam-packed with enhanced sensory detailing, such as our exclusive removable lighted central bistro table, multi-colored LED mood-lighting located throughout the spa, soothing waterfalls, integrated LED headrests, and a three-way dynamic audio system. Water clarity and consistency is also a top priority for Divine Hot Tubs. The Sinclair features a next-level integrated injected ozone and water purification system designed to keep your water clean and clear. Beautiful Cabinet & Shell Color Options. Color Option #1: Black cabinet paired with a Sterling Silver acrylic shell. Sterling silver is a white acrylic with luxurious silver and gray marbling highlights. Color Option #2: Brown cabinet paired with a Tuscan Sun acrylic shell. Best-in-Class Cabinets: Our DuraTechTM interlocking cabinets are as attractive as they are strong. With the look of craftsman wood, Divines insulated cabinets are extremely efficient in heat retention, reflecting and recycling heat, keeping the cabinet warm and dry. Ergonomic Seating: Custom designed, hand-sculpted, ergonomic seating creates a truly relaxing experience for 7. Each seat is designed to provide you with maximum comfort, including a full body lounger, captain and first-mate chairs with leg therapy jets, and a cooldown seating area. Hydrotherapy for the Active Lifestyle. The Ultimate in Hydrotherapy: With 115 patented ProLocTM high-flow hydrotherapy jets massaging and relaxing your muscles, our spa creates an environment of pure relaxation by working your body with multiple different styles of massage therapy. Fine tune your Experience: Our Comfort Valve Controls allow you to divert and increase the water flow in three of the seating stations, diverting water from the foot and leg jets to the seating area providing you with maximum control and optimal relief. Uniquely Designed For Your Comfort. Consistently Clean Water is Critical: Plumbed to move water through both the top and the bottom of the system, Divine’s Dual Defense design cleans your spa water faster, keeping it cleaner, longer. This superior system passes a much larger percentage of water through not only the filters, but through powerful UV sanitizing. At Divine Hot Tubs we know that cleaner water is safer for you, and safer for your family and friends. Exclusive Removable Bistro Table: The worlds only removable bistro table with cup spots for six! Acrylic tabletop is color- matched to the spa, and an illuminated translucent-frosted support showcases the multicolored floor-mounted LED lighting system. Glasses, Ice Bucket and Accessories not included. Multicolored Mood Lighting: LED mood lighting placed throughout the spa is fully programmable to transition between seven beautiful colors or set the lights to your favorite color. Featured in many of our jets, pillow inserts, water features and around the top edge area of the spa. Adjustable Water Features: Our Spas feature 3 fully-adjustable, deluxe, waterfall fountain arches illuminated by multicolored mood lighting to help to soothe and relax while you enjoy your spa. Marine-Grade BluetoothTM Audio System: Enjoy your favorite music with our BluetoothTM audio system. The system includes two flush-mounted Marine-grade speakers, a media player housing, and a powerful subwoofer. Insulated Hardcover with Lift System: Fully-insulated hardcover is tapered to assist with moisture drainage. Insulated with R-18 insulation, our covers are made with foam cores, marine-grade vinyl, and full-length heat seal gaskets. Our covers include sturdy foam handles to assist with easy lifting. Child safety locks are standard. Energy Efficient Heater: Our energy efficient heater provides even heating temperatures throughout the spa. No hot or cold spots. Enjoy perfect temperature, maintenance free! Quality Construction Inside and Out. Insulation: Our Reflective Thermal Barrier (RTB) insulation alleviates the heatsink effect commonly associated with flat-bottomed spas. Certified to the California Energy Commission (CEC) Standards. Shell: Quadruple-layered, ABS-backed acrylic with a clear acrylic topcoat. Reinforced with EcoSprayTM and additional expanded steel mesh in weight-loaded areas. Structural Column Supports: Uniquely designed structural supports, made of injection foam-filled PVC will not let you down! They will not rot, mold, or otherwise breakdown like the metal or wooden supports found in competitor spas. Insulated floor foundation system: ABS flooring system with thermal EPS insulation raises the spa off of the ground providing air circulation under the spa, and protecting it from moisture, bugs, rodents and other negative influences. Made in the USA: Divine Hot TubsTM are proudly engineered, designed, and made in the USA. Made in the USA. Dimensions: 92.5 x 92.5 x 39.5 (235 x 235 x 100.33 cm). Seating People Capacity: 7. Number of Therapy Jets: 115 patented ProLocTM high-flow adjustable hydrotherapy jets. 4 Pumps: 2 4.0 HP continuous-duty (5.0 BHP) single speed pumps; 1 2.0 HP continuous-duty pump (3.0 BHP); 1 high-flow quiet circulation pump for 24/7 water sanitization and enhanced water clarity. Comfort-Flow Diverter Valve: Yes. Special Feature: Independent high-flow, quiet circulation pump for 24/7 water sanitization and enhanced water clarity. Exclusive Feature: Removable bistro table. Water Capacity: 440 gallons (1666 liters). Weight Dry: 960 lbs (435 kg). Weight Filled: 4350 lbs (1973 kg). Control: Digital spa control. Insulated Hardcover Included: Yes, Deluxe 5 to 3 taper. Chemical Starter Kit: Yes. Electrical Requirements: 240 volts U. Amp/breaker: 50 amp GFCI U. Heater: Our energy efficient heater provides even heating temperatures. 5-year structural (shell surface, pillar supports and floor base). 2-year plumbing and equipment. 2-year on authorized labor. 1-year on insulated hardcover. The item “Divine Hot Tubs Sinclair 115-jet 7-person Spa, Black or Brown, SHIP FROM FACTORY” is in sale since Monday, October 2, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “lexiele” and is located in California. This item can be shipped to United States.

  • Brand: Divine Hot Tubs
  • Shape: Square
  • Capacity: 7-Person
  • Model: Sinclair
  • Country/Region of Manufacture: United States
  • MPN: Does Not Apply
Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY
Dec 6th, 2018 by admin
Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY


BRAND NEW SHIPS DIRECTLY FROM THE WAREHOUSE AND DELIVERS IN 3-4 WEEKS FROM ORDER WITHIN US48. FEEL FREE TO ASK ANY QUESTIONS BEFORE ORDERING. INTERNATIONAL BUYERS: PRODUCTS ARE GUARANTEED TO BE NEW AND AUTHENTIC. Cascading Waterfall & Ozone Water Care System. Underwater multi-color LED light & Bottom Drain. Dimensions: 81 L x 63 W x 33 H. Seating for 4, with lounge. 21 jets with stainless steel trim. Ozone water care system. Thermal locking cover with hinge seal for added heat retention. Full foam insulation for extreme energy efficiency. Intuitive and simple digital control panel. Underwater, multi-color LED light. Bottom drain for easy maintenance. Filter lid with built in cup holders. The Adriana, by AquaTerra Spas features the ultimate lounge/bench seating combination, allowing users to stretch out or sit side by side while enjoying 21 jets and a two-speed pump. Use a furniture dolly and a few friends to set the spa in the desired location. Fill the spa with a garden hose. Plug it into any nearby outlet. Once the water reaches the desired temperature, youre ready to start enjoying your new spa! Dimensions: 81 x 63 x 33 H. Jet Count: 21 jets with stainless steel trim. Jet Pump: 1.5 BHP (1HP) 2-speed. Water Capacity: 235 USG. Dry Weight: 382 lbs. Filled Weight: 2,457 lbs. Cabinet & Shell Style: Espresso synthetic wood cabinet paired with Arctic shell. Heater: 1kW (110V) / 4kW (230V) stainless steel. Electrical: 110V plugs into a standard outlet or 230V conversion (licensed electrician can supply the GFCI, conduit and wires to convert). Filtration with customized programming for optimized filtration cycles. Full foam insulation for maximum efficiency and long-term heat retention. Ozone Water Care System helps to keep water crystal clear while reducing the amount of chlorine needed. 15′ GFCI power cord (3′ are under the spa). Steps are included with this model. AquaTerra Spas are extremely energy efficient, so there is no need to turn the temperature down while not in use. Full foam insulation and a locking thermal cover will keep the heat in and the electric bill low, so you can enjoy your new spa for years to come. AquaTerra Spas exceed the stringent California Energy Commission mandates for hot tub energy consumption. What comes with the spa? What else is needed? The Adriana comes with a matching cover and steps. Aquaterra Spas do not come with chemicals. What does an Ozone Water Care System do? An Ozone Water Care System produces ozone bubbles that are injected into the spa water. The ozone, through the process of oxidation, removes contaminants such as lotions, detergents and organic waste out of the spa water improving water quality. Should the spa be turned off when not in use? AquaTerra Spas are designed to be left on, at the desired temperature, all the time. The full foam insulation and thermal cover will keep the water hot with minimal energy consumption. This means the spa is always on and ready, whenever you are. Can the spa be delivered to the backyard or deck? The spa is only delivered to the curbside in front of the driveway. Check the local service directory to find a moving service or contractor to assist moving the spa if needed. What type of foundation is required for the spa? Your new spa needs a good solid foundation. The area your spa sits on must be able to support the spa, the water in it and those who use it. If the foundation is inadequate, it may shift or settle after the spa is in place, causing stress to the shell or components. Please refer to the spass owners manual for additional information. Do I need any specialty wiring or plumbing? The Adriana can be plugged into any standard outlet (110 volt, 15 amp, dedicated outlet). No additional wiring or plumbing is required. Dry Weight: 382 lb. Number of Jets: 21. Type of Seating: Bench & Lounge Seats. Water Capacity: 235 gal. The item “Aquaterra Spas Adriana 21-jet 4-person Spa, Brown, MADE IN USA SHIP FROM FACTORY” is in sale since Saturday, January 27, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “lexiele” and is located in California. This item can be shipped to United States.

  • Type: Wood Tub
  • Brand: Aquaterra Spas
  • MPN: ADRIANA
  • Bundle Listing: Yes
  • Shape: Square
  • Capacity: 4-person
  • Model: Adriana 21-Jet 4-Person Hot Tub
  • Country/Region of Manufacture: United States
  • UPC: 842372148665
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Oct 17th, 2018 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. From Spa Pumps And More, please check out our other great deals. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. More info at Spa Pumps And More. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. For low flow controls and pumps check out our other listings as we do have them, thanks, Spa Pumps And More. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Sunday, September 30, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: High Flow Heater
  • Brand: Spa Pumps And More
  • MPN: smtd1500
  • Model: ePack
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Apr 2nd, 2018 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship



NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: High Flow Heater
  • Brand: ACC
  • MPN: smtd1500
  • Model: ePack
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
QCA Spas QCA Spas Model 0 Quick Ship 2-Person Plug and Play Spa with (8) Model 0
Mar 25th, 2018 by admin
QCA Spas QCA Spas Model 0 Quick Ship 2-Person Plug and Play Spa with (8) Model 0


Add to Favorite Sellers. 2-Person Plug and Play Spa with (8) Jets and a 3/4 HP Pump This oval-shaped spa is the perfect size for two people to relax after a long day. The PT Model 0 Spa comes equipped with (8) powerful jets and an air flow control system that adds air to the jets for a more invigorating massage. You can take advantage of being a spa owner more quickly as this spa does not require a plumber or an electrician for installation. Simply fill it up with a garden hose, plug it into any 120 Volt/15 Amp wall outlet, heat it up to 104 and jump in. The spa shell is made of easy-to-care-for Lucite plus acrylic. The cabinet is maintenance-free, and the pre-programmed filtering cycles keep your spa water safe and clean. The spa comes standard with an electronic topside control and a lockable insulated hard cover. Plugs into any 120 Volt/15 Amp outlet Built in 15-ft GFCI protected cord 3/4 HP hi-flow pump (8) 2-toned graphite gray jets: (3) Mid back pressure jets (2) Upper back pressure jets (2) Lower back adjustable vortex jets (1) Adjustable vortex. The item “QCA Spas QCA Spas Model 0 Quick Ship 2-Person Plug and Play Spa with (8) Model 0″ is in sale since Tuesday, October 03, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “allied_trade_group” and is located in US, US. This item can be shipped to United States.

  • Brand: QCA Spas
  • MPN: Model 0
  • Material: Lucite Plus Acrylic Dura-Bond ABS Polystyrene
Watkins Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 # 74427 free ship
Feb 22nd, 2018 by admin
Watkins Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 # 74427 free ship


Watkins Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 # 74427 free ship


Watkins Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 # 74427 free ship


Watkins Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 # 74427 free ship


One brand new Watkins/Calderra/Hot Springs E5 SilentFlo 5000 circulation pump for spa/hot tub systems. Oh, and check out our other listings for more rock bottom pricing on other Watkins/Calderra/Jandy/Zodiac products! Weve got your pool and spa needs covered at J and D! Track Page Views With. Auctiva’s FREE Counter. The item “Watkins Hot Spring Spa Silent Flo 5000 E5 Circulation Pump E-5 # 74427 free ship” is in sale since Wednesday, January 10, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jandd23″ and is located in San Marcos, California. This item can be shipped to United States.

  • Brand: Watkins
  • Model: HotSpring E5
  • MPN: Does Not Apply
  • Type: spa circulation pump
  • Country/Region of Manufacture: United States

Recent searches

  • hard plastic cups in Lubbock Texas mail
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship
Feb 16th, 2018 by admin
SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship


NEW hot tub controller, with electric high flow 2″ heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for a main 2-speed pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2 pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 11.5″Tx14″Wx4.5D approximately. MESSAGE US AT THE TIME YOU ORDER IF YOU WANT THE LARGE TOPSIDE OTHERWISE YOU WILL RECEIVE THE standard 2.5×5.5 topside, for sure. PLEASE send a message when you order, or you will get the 2.5×5.5″ topside, not the 3.25×7.25″ large topside, thanks! The 2.5×5.5 requires cutout hole of 1.7×4.7 to drop into. The 3.25×7.25 requires 2.2×6.2 hole. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump, filtering and heating on low speed, and jet action on high speed. Also runs an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the heater included. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow 2 Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “SPA CONTROL PACK HOT TUB HEATER CONTROLLER ePack ACC 4kW 115/230v NEW Free Ship” is in sale since Thursday, January 04, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Type: High Flow Heater
  • Brand: ACC
  • MPN: smtd1500
  • Model: ePack
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
»  Substance: WordPress   »  Style: Ahren Ahimsa