EIIDAR Heater Relay Board Replace 77119 (Formerly 74618), Fit for IQ 2020 of Watkins, SPA Heater Relay Control Board. Item Weight:? 8.4 ounces. Product Dimensions:? 6 x 5.5 x 2 inches. Country of Origin:? China. Item model number:? ED-SPA. Included Components:? Instructions, 3 FUSE. Date First Available: January 14, 2023. Replace for Watkins etc model 74618 and 73357 and 77119. Used on Caldera, Hot Springs, Tiger River, Lime Light Spas.. With 3 Fuse, Detailed instructions and wiring diagrams. Replace for Watkins etc model 74618 and 73357 and 77119, Used on Caldera, Hot Springs, Tiger River, Lime Light Spas.. Your receive the wrong item.
You are purchasing (1) WATKINS Heater Relay board part# 77119 (Formerly Part# 74618) used for Hot Spring and Caldera Spas with the IQ 2020 system. This item is Brand NEW and is right from Watkins Mfg.
Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. Item 77119 (replaces the old 74618 as of September 10, 2013). What is included: NewUpgraded IQ 2020 Heater Relay Board w/ Jumpers & Shortened Screws for the front cover of the IQ2020. It’s upgraded design provides a more efficient method of connecting the heater’s power cord to this board therefore reducing fatigue on the two “beefed up”relays. The black wire from the heater’s power cord now connects into the H1 position on the large gray terminal block. The heater’s white wire (neutral) connects onto its own separate gray terminal block. Symptoms this part has failed: No power going to the heater even though the red HTR ON L. Light is lit inside the IQ2020 control box. The heater board is charred on the front and/or the backside. Note: In older control boxes, you may encounter that a chip on this new heater relay board prevents the metal guard from seating properly and it may need to be trimmed. Visit backyardplus to watch video or download instructions. This circuit board works in all countries. This is an upgraded IQ 2020 Heater Relay Board with jumpers & shortened screws for the front cover of the IQ2020. When part was upgraded, it went from three relays to two. Replaces the 74618 as of 9-10-2013. The heater’s white wire (neutral) connects onto its own separate gray terminal block labeled H2. This will reduce stress on the relays and increase their lifespan due to better transfer of voltage. The ground wire connection remains the same. The incoming power wires and the black & white wire from the heater are inserted into the gray terminal blocks round holes by prying the gate open using a small screwdriver. Symptoms this part has failed. No power going to the heater even though the red HTR ON L. Note #2: This circuit board works in all countries. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “z-mstore” and is located in this country: US. This item can be shipped to United States.
Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “enduran38″ and is located in this country: US. This item can be shipped to United States.
Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “dosbrollc” and is located in this country: US. This item can be shipped to United States.
Spa Sundance /Jacuzzi Circuit Board. 6600-728 Sundance Spas Circuit Board formerly 6600-180, 6600-161, and 6600-098. THIS BOARD WAS USED ON SUNDANCE® 880 SERIES AFTER THE WATERFALL AND HI FLOW CIRC WERE INTRODUCED. MUST HAVE 1 SPEED PUMP. Used for the following Jacuzzi® Spas. 2006-Mid 12/2009 J-480, J-470, J-465, J-460. Incompatible Spas: J-385 3-pump models. Circuit Boards are NOT returnable. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “vhubka68″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. Item 77119 (replaces the old 74618 as of September 10, 2013). What is included: NewUpgraded IQ 2020 Heater Relay Board w/ Jumpers & Shortened Screws for the front cover of the IQ2020. It’s upgraded design provides a more efficient method of connecting the heater’s power cord to this board therefore reducing fatigue on the two “beefed up”relays. The black wire from the heater’s power cord now connects into the H1 position on the large gray terminal block. The heater’s white wire (neutral) connects onto its own separate gray terminal block. Symptoms this part has failed: No power going to the heater even though the red HTR ON L. Light is lit inside the IQ2020 control box. The heater board is charred on the front and/or the backside. Boxes, and APO addresses is not available for this item. In the Box: (1) Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “cro.art” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. 6.93 x 6.34 x 1.54 inches. Item 77119 (replaces the old 74618 as of September 10, 2013). What is included: NewUpgraded IQ 2020 Heater Relay Board w/ Jumpers & Shortened Screws for the front cover of the IQ2020. It’s upgraded design provides a more efficient method of connecting the heater’s power cord to this board therefore reducing fatigue on the two “beefed up”relays. The black wire from the heater’s power cord now connects into the H1 position on the large gray terminal block. The heater’s white wire (neutral) connects onto its own separate gray terminal block. Symptoms this part has failed: No power going to the heater even though the red HTR ON L. Light is lit inside the IQ2020 control box. The heater board is charred on the front and/or the backside. Note: In older control boxes, you may encounter that a chip on this new heater relay board prevents the metal guard from seating properly and it may need to be trimmed. Visit backyardplus to watch video or download instructions. This circuit board works in all countries. This is an upgraded IQ 2020 Heater Relay Board with jumpers & shortened screws for the front cover of the IQ2020. When part was upgraded, it went from three relays to two. The heater’s white wire (neutral) connects onto its own separate gray terminal block labeled H2. This will reduce stress on the relays and increase their lifespan due to better transfer of voltage. The ground wire connection remains the same. The incoming power wires and the black & white wire from the heater are inserted into the gray terminal blocks round holes by prying the gate open using a small screwdriver. Note #2: This circuit board works in all countries. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jrah5252″ and is located in this country: US. This item can be shipped to United States.
Hot Springs Heater Relay Board 77119 (Formerly 74618) IQ 2020 Watkins. Item 77119 (replaces the old 74618 as of September 10, 2013). What is included: NewUpgraded IQ 2020 Heater Relay Board w/ Jumpers & Shortened Screws for the front cover of the IQ2020. It’s upgraded design provides a more efficient method of connecting the heater’s power cord to this board therefore reducing fatigue on the two “beefed up”relays. The black wire from the heater’s power cord now connects into the H1 position on the large gray terminal block. The heater’s white wire (neutral) connects onto its own separate gray terminal block. Symptoms this part has failed: No power going to the heater even though the red HTR ON L. Light is lit inside the IQ2020 control box. The heater board is charred on the front and/or the backside. Note: In older control boxes, you may encounter that a chip on this new heater relay board prevents the metal guard from seating properly and it may need to be trimmed. Visit backyardplus to watch video or download instructions. This circuit board works in all countries. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “oleg_stockus” and is located in this country: US. This item can be shipped to United States.