Spa Hot Tub Pump 1.5HP SPL – 2″ with Pre-Installed “Thermal Wrap Heater Jacket. For spas and hot tubs requiring 1 speed motors Motor Description: Mfg: Century HP:1.5hp SPL RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL15SDCS2/2 5190-250 1.5 HP 2″ Center Suction x Side Discharge (1 1/2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Hot Tub Pump 1.5 hp SPL Ultima, Ultra Jet 2 with Thermal Wrap Heat Jacket” is in sale since Sunday, March 16, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1.5HP Full Rated 1 1/2″ with Pre-Installed “Thermal Wrap Heater Jacket. Dual Voltage 115/230 volts. For spas and hot tubs requiring 1 speed motors. Note: Typically this pump and motor is used on hot tubs requiring a 230 volt motor even though it’s dual voltage. For hot tubs requiring a 115 volt motor rated at 1.5HP, we recommend our single voltage motor. Motor Description: Mfg: Century HP: 1.5 – Service factor 1.0 (2hp SPL) RPM: 3450 Single Speed 115/230 Volts – dual voltage Amps: 16.5/8.3 HZ: 60 Frame: 56Z (48Y) Thermally Protected. Pump Description: Mfg: Vico/Balboa P/N. PKUL15SDCS, 5190-240, PKUL15HSDCS 1.5 HP (2HP SPL) 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet Spa Pump With Thermal Wrap (Heat Transfer/Recycling System). For more information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Can be used and retrofitted to work with most spas requiring 1.5 hp single speed, 3450 rpm, 115/230 volts pump motor. Note: Before ordering this “FULL RATED” 1.5 hp – as a replacement pump – make sure that your existing pump is not an “Uprated” pump. Sometimes manufactures call their pump a 1.5 HP when it’s really 1 hp. They call this an Uprated or SPL Pump. The motor amperage determines the true horse power. A 1 hp pump will be rated at approximately 11-14 amps. A 1.5 hp pump will be rated approximately 15 – 16 amps. Also note: you may think you have or need a pump for 2″ plumbing, when you actually need 1 1/2″. The pump connections measure larger than the actual pipe size used. The threaded connection on a 1 1/2″ pump measure 2 3/8″ – the threaded connections on a 2″ pump measure 3″. Unless otherwise specified, you will receive 1 1/2 pump connections. More about the – Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pump motors. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. Note: Thermal Wrap color may vary. The item “Hot Tub Pump 1.5hp (Full Rated) 1 1/2 Ultra Jet with Thermal Wrap Heat Jacket” is in sale since Thursday, February 27, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1HP with Pre-Installed “Thermal Wrap” Heater Jacket. For spas and hot tubs requiring 1 speed motors Direct replacement for Dreammaker Spa Motor Description: Mfg: Century HP: 1 – Service factor 1.0 (1.5hp SPL) RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL10HSDCS 1 HP (1.5HP SPL) 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the “Thermal Wrap”. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Hot Tub Pump 1hp Ultra Jet 1.5 with Thermal Wrap Heat Jacket” is in sale since Friday, January 31, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1.5HP SPL with Pre-Installed “Thermal Wrap” Heater Jacket. For spas and hot tubs requiring 1 speed motors Direct replacement for Dreammaker Spa Motor Description: Mfg: Century HP:1.5hp SPL RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL15SDCS 5190-240, PKUL15HSDCS 1.5 HP 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System). For information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Hot Tub Pump 1.5 hp SPL Ultima, Ultra Jet 1.5 with Thermal Wrap Heat Jacket” is in sale since Wednesday, February 19, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Softub Hot Tub Pump Replacement – 1 HP with Pre-Installed “Thermal Wrap” Heater Jacket. Through the past 20+ years we have supplied hundreds of Thermal Wrap Heat Jacket systems for Softub applications. The Thermal Wrap Heat Jacket will heat your Softub as well if not better than the coil wrap. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : Century / A. Smith Horse Power: 1 Service Factor 1.0 (1.5hp SPL) Volts: 115 Amps: 11.8 – 12 RPM: 3450 Frame: 48Y HZ: 60 Stainless Shaft Thermally Protected. Pump: (pre-installed on motor) Mfg: Aqua-Flo P/N. 1 HP 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Friday, November 25, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Portable Hot Tub Massage Wood Acrylic Spa Jacuzzi Bubble 5 Person Thermal Cover. There’s a revolution in relaxation, and the Comfort Line Spa N A Box Portable Spa is at the center of it all. Soothing relaxation is within easy reach with this incredibly comfortable, mobile, and portable spa. This faux-wood acrylic spa sets up in 20 minutes, plugs into any wall outlet, features a 1 HP turbo wave massage system, heats up to 104-degrees, and requires no special hardware or plumbing. Seats up to 5 people and includes an inflatable thermal cover. About Comfort Line Products, Inc. Comfort line Products, Inc. Is an innovator and pioneer in the portable spa and portable hydrotherapy industries. Since 1996, the company has refused to rest, always pushing forward for the best way to create products that enrich their customers lives. Every day, the creative workforce at Comfort Line searches for inspirational, imaginative ways to continue serving as the most desired portable spa and hydrotherapy brand on the market. Our goal is to provide the best customer service. All enquiries are answered within 24 hours and our friendly customer service team aims to resolve any issues quickly and effectively. The item “Portable Hot Tub Massage Wood Acrylic Spa Jacuzzi Bubble 5 Person Thermal Cover” is in sale since Saturday, July 29, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jp_sales” and is located in Los Angeles, California. This item can be shipped to United States.
4-Person Jacuzzi Hot Tub Spa Heated Bubble w/Matching Step & Thermal Hard Cover. The Getaway 4-person spa features indestructible rock solid unibody construction and is a full-sized spa that is part of LifeSmart’s Plug n Play series. This LifeSmart spa plugs into a standard 110v electrical outlet to eliminate the higher installation and operating costs of other full-sized spas. 4-Person Spa with Matching Spa Step. Rigid sandstone unibody construction. 110v, 3-prong dedicated 15-amp outlet electrical service. Single 1.5-hp, single-speed pump. 1kw thermal friction heating system. Digital topside LED controls. Thermal hard spa cover. Matching sandstone spa steps: 30” x 22” x 15′. Exterior spa dimensions: 70” x 61” x 32′. Product in Inches (L x W x H): 70.0 x 61.0 x 32.0. The item “4-Person Jacuzzi Hot Tub Spa Heated Bubble withMatching Step & Thermal Hard Cover” is in sale since Tuesday, April 25, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “*0nlinedailydeals*” and is located in Phoenix, Arizona. This item can be shipped to United States.
4-Person Jacuzzi Hot Tub Spa Heated Bubble w/Matching Step & Thermal Hard Cover. The Getaway 4-person spa features indestructible rock solid unibody construction and is a full-sized spa that is part of LifeSmart’s Plug n Play series. This LifeSmart spa plugs into a standard 110v electrical outlet to eliminate the higher installation and operating costs of other full-sized spas. 4-Person Spa with Matching Spa Step. Rigid sandstone unibody construction. 110v, 3-prong dedicated 15-amp outlet electrical service. Single 1.5-hp, single-speed pump. 1kw thermal friction heating system. Digital topside LED controls. Thermal hard spa cover. Matching sandstone spa steps: 30” x 22” x 15′. Exterior spa dimensions: 70” x 61” x 32′. Product in Inches (L x W x H): 70.0 x 61.0 x 32.0. The item “4-Person Jacuzzi Hot Tub Spa Heated Bubble withMatching Step & Thermal Hard Cover” is in sale since Monday, October 03, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “0nlinedailydeals**” and is located in Phoenix, Arizona. This item can be shipped to United States.
4-Person Spa With Matching Spa Step. The Getaway 4-person spa features indestructible rock solid unibody construction and is a full-sized spa that is part of LifeSmart’s Plug n Play series. This LifeSmart spa plugs into a standard 110v electrical outlet to eliminate the higher installation and operating costs of other full-sized spas. 4-Person Spa with Matching Spa Step. Rigid sandstone unibody construction. 110v, 3-prong dedicated 15-amp outlet electrical service. Single 1.5-hp, single-speed pump. 1kw thermal friction heating system. Digital topside LED controls. Thermal hard spa cover. Matching sandstone spa steps: 30” x 22” x 15′. Exterior spa dimensions: 70” x 61” x 32′. Product in Inches (L x W x H). 70.0 x 61.0 x 32.0. The item “4-Person Jacuzzi Hot Tub Spa Heated Bubble withMatching Step & Thermal Hard Cover” is in sale since Tuesday, January 05, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jp_sells” and is located in Multiply Locations. This item can be shipped to United States.
CANADIAN SPA COMPANY – BECAUSE NOT ALL HOT TUB COVERS ARE EQUAL. THE BEST QUALITY COVERS AT THE LOWEST PRICES. STOCK COVERS – DELIVERED DIRECTLY TO YOUR DOOR. Our Covers will fit Spas such as. Jacuzzi, Hydro Spa, Gulf Coast, Dimension One, Coleman, Caldera, Beachcomber, Artesian Spa, Artic Spa, Coast Spa, L. Spa, Marquis Spas, Saratoga Spas, Soft Tub, Southwest Spa, Spaform, Sundance Spas, Vita Spas, Canspa, California Spa, Cal Spa, Hydropool, Agean Spas, Clearwater spas, Diamante Spas, Elite Spas, PDC Spas, Dynasty Spas, Monarch Spas, Tiger River Spas, Garden Leisure Spas, Vita Spas, Sunbelt Spas, Phoenix Spas, Watkins, Hotspring Spas, Sunrise Spas, Dream Maker Spas… Foam Thickness: 5 1.5 LB foam / Type II (2) – Expanded Polystyrene Insulation: R 22.75. If you go for a flat 3 density cover this will give low insulation properties and you will get rainwater pooling on the surface. Most suppliers will only offer up to a 4/3 Ratio – Why settle for less when ours are Canadian manufactured and are 5/3 Ratio which will offer superior insulation and subsequent energy savings. Saving Seal Pillow – Reducing heat loss and Improving the efficiency of your spa. Heat has a great way of finding any route it can through your cover! The most vulnerable part of your cover is along the fold and if this area is unprotected heat will escape along the length of the fold. Our covers have a continuous heat seal pillow that runs the full length of the fold to fully insulate and keep running costs down. Don’t be fooled when you see end caps on the outer points of the fold, this is just for show! .. The pillow should run the full length of the fold to be efficient. 8 x Triple Strength Locking Straps – Built to maintain continued use. Our covers will come with both Male & Female part of the locking clip so you will be able to secure the locking straps to the relevant position on your hot tub. All covers should have l. Ockable Straps with Buckles for safety and storage. X Locking Buckles – For complete safety and storage. Some manufactures offer locking straps as extras.. This will bump up the final price you pay. 6 x Sturdy, Reinforced Handles – Triple folded reinforced vinyl backed up with double-stitched seams for the sturdiest of handles end and side. The positioning and the amount of handles will greatly enhance the operating experience of your cover. Our handles are positioned so at any one time you will be able to access and grip two handles to ensure ease of cover operation. Some manufactures offer handles as extras.. Insulating Polystyrene Core – Our expanded polystyrene has top-rated insulation properties. 2 mil Poly Wrap Vapour Moisture Barrier – The Plastic wrap prevents moisture from reaching the foam core. Our 5/3 ratio foam core’s tapered design gives optimum heating and insulation whilst the taper keeps rainwater off the spa cover. The insulating foam inside the cover is vacuum sealed with a 2 mil. Poly wrap Vapour Barrier to increase the longevity of the cover and retain the heat. The Vapour/Moisture Barrier will prevent water ingress from above elements and water vapour from below. This will stop your cover getting waterlogged and heavy. Marine Grade Vinyl – Tough and resilient, 100% polyester backing, mildew Treated face and back. Tough Bottom – To Ensure the durability of the cover. The bottom of the cover is manufactured out of mildew inhibiting vinyl to prevent moisture deterioration and provides minimal water absorption. Durable Reinforced Hinge – The aluminium channel reinforcement at the cover hinge adds strength and durability. An aluminium channel is fixed down the centre of the cover to provide extra strength and stability when opening the cover. The material we use avoid any possible rusting and strengthens the centre of your cover. Commercial Quality Zipper – Heavy-duty 45 nylon zip chain and aluminium pulls. Tough and durable zips to ensure the integrity of the inner core. We only use commercial quality materials that wont weather or rust. Insulating / Protective Skirt. Our covers come with a 5 skirt to further enhance the insulation qualities and provides protection against the elements. Rugged Reinforced Double Stitching – Adds durability. Our covers are built to last and the stitching is 92lb bonded polyester thread with UV protection. Ensuring the exterior holds together through all weather conditions or physical stress. Easy Care A little soap and water does it. Colours Two different colours to choose from. COMPARE US TO THE REST – WE ARE THE BEST. WHAT OTHERS SELL AS OPTIONAL EXTRAS ALL OUR COVERS ARE FULLY FEATURED AND ARE INCLUDED AS STANDARD AT NO ADDITIONAL COST. Featuring 5 > 3 “ratio quality – 5″ core thickness for top insulation properties, tapering to 3 to allow rainwater run off. It’s designed to stand up to extreme weather conditions, warm or cold, rainy, snowy, or dry. Over its lifetime, the energy savings could add up to double the cost of the cover, depending on your electricity rate. If you want a first-rate hot tub cover at a great price, Canadian Spa Company is your best choice. NEED ASSISTANCE – 01293 812044. The item “Replacement Hot Tub Spa Thermal Covers / 5 Core Thick Density / UK Stock /” is in sale since Wednesday, April 30, 2014. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “mr_spa” and is located in Redhill, Surrey. This item can be shipped to all countries in Europe, to United States, to Canada.
