BOARD ASSEMBLY KIT MSPA-MP-GE1. Series of spa packs. We designed the M-Class to meet our customers’ needs. Just a few of the design details that make this pack unique: it can be wall-mounted or installed on mounting base; new heater cover design makes installation easier and supports pressure switch and hi-limit probe; heater can be installed on the back, side or front of power box, with or without its base; connector slots, cable paths, strain relief and transformer location have all been improved. The M-Class remains a universal spa pack, perfect for most spas on the market. It can control one or two single- or dual-speed pumps, a blower, 5.5 kW heater, light, circulation pump, fiber box light, and ozonator. M-CLASS series of spa packs! Clearly Advanced Spa Systems! Pumps 1 & 2 (dual-speed) Optional pump 3 Blower Optional circulation pump Heater Light Ozonator Fiber light Optional auxiliary outputs #1 & #2 Optional AC lights #1 & #2. Custom backlit LCD display Digital temperature display Sensor failure detection Ozone management Air channel clean-out Programmable filter cycles High-limit protection Pressure switch failure detection Current limiting option Smart Winter Mode Temperature accuracy within ± 1°F Overtemp mode protection Overtemp protection on filter cycle CoolRays and fiber light compatible DJS-1 compatible (optional) Real time clock (optional) SpaWatch and Pocket-tek ready! CE & AS version available And more! For all MSPA-MP Propak series (through jumpers). Pump 1 dual-speeds, Pump 2 dual-speeds, Pump 3 single speed. Blower 1-3speeds , Circulation Pump, Ozone, Light 3 intens. Fiber optic, Auxiliary for Pwr sply. Heater output up to 5.5 kW. All accesories can be independately converted easily in 120/240V depending on voltage requested. Replace all MC-MP spa pack with the following ID #. Anymore / No quiet key anymore / Functionnalities different. 3-74-7049 Board handles an internal fiber optic, no need for the EXM-5. Now included HiLimit sensor. Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4 days with tracking#. CanadaPost + your local Postal services. International surface/boat parcel – 4 to 7 WEEKS, with tracking#. Xpresspost International – EMS – 4-10 days, with tracking. The item “Gecko Spa Builders M-Class circuit board for MSPA-MP & M-CLASS meta packs series” is in sale since Wednesday, November 2, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines et piscines thermales\Spas et bains à remous”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
Gecko electronics / Spa Builders system Group (SBSG). Pump1, Pump2, fiber optic, Ozone. Never use or try. Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-10 days, with tracking#. Xpresspost USA 2-4 days with tracking#. CanadaPost + your local Postal services. International parcel – AIR – 6 to 20 days, with tracking#. Xpresspost International – EMS – 4-10 days, with tracking#. The item “Gecko Spa Builders spa pack circuit board for all TSPA-MP (mostly Coast spas)” is in sale since Wednesday, January 11, 2017. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines et piscines thermales\Spas et bains à remous”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
Gecko has stop making the mini spa pack U-Class (USPA) since many years now. The U-Class is now replaced by the new model, the IN. Same compact size heater/plumbing, same operations. Complete BUNDLE KIT of Spa pack IN. YJ + 4kw Heater (1kw on 120V) Heat. K300 topside control keypad + Light cable & socket + (now with) 12v LED white bulb + Adapter plate for keypad + Mounting plate & screws. YJ-2-H4.0-AMP-GD1 120/240V 60Hz 32A max (North America). Pump#1 with 1 or 2 speeds, 120/240V max 15A. Ozonator 120/240V max 3A. Direct output connection (always hot) max 10A. Heater 4kw/240V max 16A or 1kw/120V max 10A. Light or LED 12V AC 0.5A/6W. AMP plug or direct PCB quick connect terminals. YJ small package, zero compromise. Treat your one pump spa with dignity! Say hello to the newest member of the Y Series! Yjs size offers the flexibility to be easily assembled in your small footprint spa, without losing out on functionality and options. Like all Y Series packs, the in. Yj is compatible with our in. K series of keypads. And what’s more, the Y Series also takes into account future compatibility, so you can have peace of mind knowing that you can enjoy the Y Series for years to come. Yj spa control system is equipped with a remote heater that simplifies the installation and location in the equipment compartment of smaller spas. The full size heater 2 will not reduce flow to the spa jets. Filed convertible 120 to 240V. The Y Series provides easy access to the control board for all maintenance and replacement requirements, including conversion between 120 and 240 V. The Y Series will fit each and every spa produced today and well into the future. With the Y Series: you’re ready. This product is the simplest, most flexible solution when it comes to supporting even the most complex array of spa add-ons and options. The Y series offers the kind of simplicity that makes for a genuine top-of-its-class product. It is the natural choice for anyone who wants an easy-to-understand multi-application solution. Total flexibility, total compatibility, total satisfaction. With the Gecko Y series you don’t have to wonder about compatibility; instead, theres just the comforting certainty that when you invest in the Y series, all spa configurations are supported. What’s more, the Y series also takes into account future compatibility, so you can have peace of mind knowing that you can enjoy the Y series for years to come. Geckos new Y series Spa Control System matches any spa available. If its a spa, the Y series will adapt to it. This durable, efficient new controller gives you everything you need in a spa control system while taking flexibility to a whole new level. System designed to accept future technologies. The Y Series will remain state-of-the-art for many years to come. Its an investment for today, and the future. Advanced technology that responds to todays market by providing a genuinely simple way to make finished products more attractive. AMP connector and quick connect versions of the Y packs are both available. Single platform covering low to high-end spas. From simple entry level hot tubs to complex swim spa systems, the Y Series meets all requirements. The Y Series provides easy access to the control board for all maintenance and replacement requirements. Keypad auto detection options are also featured. Whatever the spa, this is your control system. Input was designed to ease wire insertion(up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime. A heater safety system located on the heat. Wav heater with an all-electronic dry-fire protection. Seal provides an extra level of protection against water infiltration. Connectors and power box are designed to be watertight so that no water can be in direct contact with electrical components (IPX5). Cip is an intelligent water temperature refresh algorithm that calculates optimal time to start pumps and get water temperature readings. Cip continuously readjusts the heater start time. Stik is a pen drive with an in. Link connector very similar to a USB memory stick. It connects to the spa pack and contains data to program or configure its system. The system executes the data upload automatically. Ingenious plugs and connectors. The Y Series is only compatible with the low-voltage family of in. Link connectors, such as those used by keypads and similar low-voltage accessories. You’re always in touch with your relaxation. All Y Series packs support the in. Touch WiFi interface , allowing you to use your favorite iOS & Android-base devices to communicate with your spa. K600 Static main keypad LCD display. 11 keys, 14 function icons. K4 keypad LCD display, 8 keys, 10 function icons. K8 keypad LCD display, 8 keys, 6 function icons. K35 main keypad LCD display, 6 keys, 8 function light indicators. K200 main keypad LCD display, 4 keys, 7 function light indicators. K450 main keypad LCD display, 7 keys, 10 function icons. K800 main keypad Color LCD display, 10 keys. K500 main keypad Color LCD display, 7 keys. K300 main keypad LCD display, 4 keys (INCLUDE IN THIS BUNDLE KIT). 32F (0C) to 140F (60C). 13°F (-25°C) to 185°F (85°C). Humidity: up to 85% RH, non condensing. IPx5 for TUV (CE/AUS/NZS) & CSA Enclosure #2. Certain current limits may apply. Please talk to your customer. Service representative for more information. Dimensions: (W x H x D). 12.08″ x 7.38″ x 3.74 (307 x 187 x 95 mm). Weight: 3.1 lb (1.41 kg). 19.58″ x 4.94″ x 3.92 (497 x 125 x 100 mm). Weight: 4.65 lb (2.1 kg). Y Series UL/CSA electrical specifications (North America). 60 Hz nominal +1.5 / -1.0 Hz. (2 lines required with neutral) 32 A Max. 120 V nominal only (+5/-10%). (single line with neutral) 16 A Max. Voltage: 120 or 240 V, 60 Hz. Wattage: 4 kW at 240 V, 1 kW at 120 V. Flow rate: Minimum of 18 GPM (68.1 LPM) is required. Pump 1 (2-spd) 120 or 240 V 15 FLA/60 LRA (inrush). 120 or 240 V 3 FLA/6 A. Direct out 1 120 or 240 V 10 A (always on). Light output 12 Vdc 0.5 AMP (6W Light bulb). 1 Certain current limits may apply. Please talk to your customer service representative for more information. 2 Total of Pump 1, O3 and Direct out should not exceed. 16 FLA for UL/CSA version. 3 The output voltage is selectable according to input supply. 4 The ozonator is connected in parallel with the Pump 1 low speed. Therefore they cannot be controlled independently. This “item” is for. YJ + Heater Heat. K300 topside control keypad + Light cable & socket + Adapter plate for keypad + Mounting plate & screws. COMPLETE OEM PRODUCT FROM GECKO DIRECTLY, Brand new object. (45x35x20 cm — 4.54kg). Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4 days with tracking#. CanadaPost + your local Postal services. International surface/boat parcel – 4 to 7 WEEKS, with tracking#. Xpresspost International – EMS – 4-10 days, with tracking. The item “Gecko Spa Builders U-CLASS spa pack NEW MODEL replacement IN. YJ for one pump” is in sale since Wednesday, January 11, 2017. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines & piscines thermales\Spas & bains tourbillons”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
Spa Builders – CONTROL: AP-4 240V WITH HEATER 5.5KW AND TIME CLOCK – 3-70-0469. 240V, 4 Wire Ready Operates: Pump 1 – 240V, 2-Speed Pump 2 – 240V, 1-Speed Blower – 120V, 1-Speed Ozone – 120V Light – 12V Cords – Pump 1, Pump 2, Blower, Ozone Topside Not Included, Recommend: AI #932449-120 Len Gordon 4 Button Digital Topside Replacement option for: AI# 3-70-0425 Difference is smaller box, length of heater is 12 and does not have built in GFCI. Brand name : Spa Builders by Allied Innovations. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. Let us use our random knowledge of pools and spas to help you. We sure don’t get to talk about it when we go home after work, as that could bore our loved ones. The item “Spa Builders CONTROL AP-4 240V WITH HEATER 5.5KW AND TIME CLOCK 3-70-0469″ is in sale since Monday, June 29, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Builders – CONTROL: AP-4 120/240V WITH HEATER 5.5KW & TIME CLOCK – 3-70-0217. 120V, 1.5KW, 20AMP, 3 Wire. Or 240V, 5.5KW, 30/50AMP, 4 Wire. Pump 1 – 120V, 2-Speed. Blower – 120V, 1-Speed. Cords: Pump 1, Blower, Light. Topside Not Included, Recommend. Len Gordon 3 Button Digital Topside. Note: There Is No Internal GFCI. AI #3-70-0525 AP-4 Convertible. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. Let us use our random knowledge of pools and spas to help you. We sure don’t get to talk about it when we go home after work, as that could bore our loved ones. The item “Spa Builders CONTROL AP-4 120/240V WITH HEATER 5.5KW & TIME CLOCK 3-70-0217″ is in sale since Tuesday, February 23, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada.
