»
S
I
D
E
B
A
R
«
Spa Control Hot Tub Heater & Controller SMTD1000 2.5×5.5 Topside ACC 5.5kW NEW
Mar 11th, 2019 by admin
Spa Control Hot Tub Heater & Controller SMTD1000 2.5x5.5 Topside ACC 5.5kW NEW


Spa Control Hot Tub Heater & Controller SMTD1000 2.5x5.5 Topside ACC 5.5kW NEW


Spa Control Hot Tub Heater & Controller SMTD1000 2.5x5.5 Topside ACC 5.5kW NEW


This Smartouch Digital Control comes with 15 heater, power cords, and is a complete unit to replace your old spa control and heater. Runs a main 2 speed spa pump, and an air blower or 2nd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is not a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000 for 4-wire 230v or 3-wire 115v. (not for 3-wire 230v). 15 stainless steel heater with standard threaded couplings. Digital display keypad (topside) 2.5×5.5″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord 48 long with quick disconnect AMP plug and motor connectors. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual. The item “Spa Control Hot Tub Heater & Controller SMTD1000 2.5×5.5 Topside ACC 5.5kW NEW” is in sale since Tuesday, January 1, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “warehousethirtythree” and is located in Southern, California. This item can be shipped to United States.

  • Country/Region of Manufacture: United States
  • Type: high flow
  • MPN: SMTD1000
  • Brand: ACC
Spa Builders CONTROL AP-4 240V WITH HEATER 5.5KW AND TIME CLOCK 3-70-0469
Jan 21st, 2019 by admin
Spa Builders CONTROL AP-4 240V WITH HEATER 5.5KW AND TIME CLOCK 3-70-0469



Spa Builders – CONTROL: AP-4 240V WITH HEATER 5.5KW AND TIME CLOCK – 3-70-0469. 240V, 4 Wire Ready Operates: Pump 1 – 240V, 2-Speed Pump 2 – 240V, 1-Speed Blower – 120V, 1-Speed Ozone – 120V Light – 12V Cords – Pump 1, Pump 2, Blower, Ozone Topside Not Included, Recommend: AI #932449-120 Len Gordon 4 Button Digital Topside Replacement option for: AI# 3-70-0425 Difference is smaller box, length of heater is 12 and does not have built in GFCI. Brand name : Spa Builders by Allied Innovations. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. Let us use our random knowledge of pools and spas to help you. We sure don’t get to talk about it when we go home after work, as that could bore our loved ones. The item “Spa Builders CONTROL AP-4 240V WITH HEATER 5.5KW AND TIME CLOCK 3-70-0469″ is in sale since Monday, June 29, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada.

  • Brand: Spa Builders by Allied Innovations
  • MPN: 3-70-0469
  • Model: CONTROL: AP-4 240V WITH HEATER 5.5KW AND TIME CLOC
Balboa Control SUV M7, 120/240V, 5.5KW, With Cords 52531-03, 52531HC3
Jan 19th, 2019 by admin
Balboa Control SUV M7, 120/240V, 5.5KW, With Cords 52531-03, 52531HC3


Balboa Control SUV M7, 120/240V, 5.5KW, With Cords 52531-03, 52531HC3



Balboa Spa Control – CONTROL: SUV M7 120/240V 5.5KW HEATER – 52531-03. CONTROL: SUV M7 120/240V 5.5KW HEATER & CORDS, WITHOUT TOPSIDE. Brand name : Balboa Water Group. The item “Balboa Control SUV M7, 120/240V, 5.5KW, With Cords 52531-03, 52531HC3″ is in sale since Wednesday, April 10, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Other Pools & Spas”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam.

  • Brand: Balboa
  • Model: SUV M7 5.5KW
  • MPN: 52531, 52531HC3
  • Country of Manufacture: United States

Recent searches

  • balboa 52531-03
Spa Builders CONTROL AP-4 120/240V WITH HEATER 5.5KW & TIME CLOCK 3-70-0217
Jan 14th, 2019 by admin
Spa Builders CONTROL AP-4 120/240V WITH HEATER 5.5KW & TIME CLOCK 3-70-0217


Spa Builders – CONTROL: AP-4 120/240V WITH HEATER 5.5KW & TIME CLOCK – 3-70-0217. 120V, 1.5KW, 20AMP, 3 Wire. Or 240V, 5.5KW, 30/50AMP, 4 Wire. Pump 1 – 120V, 2-Speed. Blower – 120V, 1-Speed. Cords: Pump 1, Blower, Light. Topside Not Included, Recommend. Len Gordon 3 Button Digital Topside. Note: There Is No Internal GFCI. AI #3-70-0525 AP-4 Convertible. Our company name is Pool Spa Supplies, and our reputation is exemplary. Thank you for your business. Looking for hard to find pool and spa parts? Unsure of what you need? Give us a call, we can help! Why choose POOL SPA SUPPLIES? With 25 years in the pool and spa service industry, we know what it means to provide good customer service. Our technicians will even help you program your spa control. Tom can rattle off part numbers and replacements faster than you say POOL SPA SUPPLIES. Let us use our random knowledge of pools and spas to help you. We sure don’t get to talk about it when we go home after work, as that could bore our loved ones. The item “Spa Builders CONTROL AP-4 120/240V WITH HEATER 5.5KW & TIME CLOCK 3-70-0217″ is in sale since Tuesday, February 23, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “poolspasuppliesonline” and is located in Houston, Texas. This item can be shipped to United States, Canada.

  • Brand: Spa Builders by Allied Innovations
  • MPN: 3-70-0217
  • Model: CONTROL: AP-4 120/240V WITH HEATER 5.5KW AND TIME
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230
Jan 7th, 2019 by admin
Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230


15″ 5.5kw High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad (or optional 2.5 x 5.5 Topside Display/Keypad if you request this). Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. From Spa Pumps And More. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 3.25 x 7.25″ topside drops into 2.2×6.2″ cutout in your spa, see 2nd photo. The smaller one is 2.5×5.5″ and drops into a 1.7×4.7″ cutout hole. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. More info at Spa Pumps And More. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM , it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using wire nuts. Includes 15 inch long x 2.25 diameter 5500 watt stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime. The item “Spa Control Hot Tub Heater Digital Controller Pack L SMTD1000 ACC 5.5kw 115/230″ is in sale since Sunday, September 30, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.

  • Country of Manufacture: United States
  • Controls: Pump & Blower or 2 pumps, light, heater, ozonator
  • Shape: For 2″ or 1-1/2″ pvc pipe size systems
  • Voltage: 240V or 120V convertible
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Model: SMTD1000
  • MPN: smtd1000
  • Country/Region of Manufacture: United States
  • Brand: Spa Pumps And More
  • Includes: all new power cords
  • Warranty: ACC factory warranty.
  • Type: HIGH FLOW Heater 20 GPM Minimum
Spa hot tub Gecko 5.5kW Heat. Wav HEATER for MSPA-MP & M-Class packs 9920-100347
Oct 3rd, 2018 by admin
Spa hot tub Gecko 5.5kW Heat. Wav HEATER for MSPA-MP & M-Class packs 9920-100347


Geckos series of heaters for. Spas & hot tubs. With Dtec-1 pressure detection system. Standard Flo-Through/In-Line spa heater, 15″ inches wide, 2″ inches pipe diameter I. HeatChannel Heater / Collector assembly (certified 40psi tested). Electrical Power rated for inColoy870 element. North America, UL/CSA approved: 240V/60Hz/5.5kW // 120V/60Hz/1.2kW. Europe, CE/TUV approved: 230V/50Hz/5kW. Include certified Gecko’s new universal Pressure switch assembly D-Tec1. We know that our new Dtec-1 pressure detection system is among the most important pieces of safety equipment found in your spa system. It constantly monitors water flowing through the heater and helps protect the integrity of critical components if ever a problem arises. That’s why we designed it to be the most precise, the most reliable and the most durable pressure detection system made available to the spa and hot tub industry. Available in factory presets configurations of 1.5 or 2 psi, Dtec-1 has a smaller foot print, is universal and easy to install, shares same set point with other models and can be used to replace them. It is virtually unaffected by ambient temperature variation. Intensive testing and validation prove Dtec-1 to be the most stable pressure detection system. Small size Dtec-1 is a universal fit for all spa pack models. It is fully compatible with Gecko Alliance’s Metapacks, Spa Builders’ CLASS spa systems and new heat. Also included, 2 PVC split Union Nuts & 2 Tailspieces (2in) + 2 gaskets + 4 screws. Universally compatible with any kind of spa pak, even old mechanic pak. This is the OEM heater for. MSPA-1-4, MSPA-MP or M-Class spa pack. COMPLETE OEM PRODUCT FROM GECKO DIRECTLY. Autorized Gecko’s reseller, Brand new objects. Xpresspost 1-3 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4days with tracking#. CanadaPost + your local Postal services. XpressPost International – EMS – 4-10 days, with tracking#. The item “Spa hot tub Gecko 5.5kW Heat. Wav HEATER for MSPA-MP & M-Class packs 9920-100347″ is in sale since Thursday, December 8, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines & piscines thermales\Spas & bains tourbillons”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.

  • Marque: Gecko Alliance
  • Capacité: 5.5kw
  • Pays/région de fabrication: Canada
  • Numéro de pièce fabricant: 9920-100347
Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED
Sep 11th, 2018 by admin
Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED


This listing includes a free LED-10 light bulb, a color changing bulb to add some fun to your tub! Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC. The SMTD1000 is unique, unlike other spa controls it does not rely on small motherboard relays to carry the 23 amp load to the heater, it has a large contactor switching the heater, see inset photo. This eliminates the most common cause of board failure, having the heater relay fail. A great feature that only the SMTD 1000, 2000, and 3000 controls have. This Smartouch Digital Control comes with 15″ high flow 2″ heater, Large 3.25×7.25 Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller, along with all your specs and details. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16″ tall, and 15-3/8″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual. Manual and Programming Guide can be viewed and printed on the ACC-Spas website. The item “Spa Control Hot Tub Heater Controller Pack SMTD1000 KP-2010 ACC 5.5kW Free LED” is in sale since Wednesday, August 8, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “tazi_discounts” and is located in Azusa, California. This item can be shipped to United States.

  • Model: 1000
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • MPN: SMTD1000
  • Brand: ACC
  • Non-Domestic Product: No
New Cal Spa Heater Flo Thru 5.5KW HEA14100450
Jul 7th, 2018 by admin
New Cal Spa Heater Flo Thru 5.5KW HEA14100450


New Cal Spas Balboa Heater Flo Thru 5.5 KW HEA14100450. The item “New Cal Spa Heater Flo Thru 5.5KW HEA14100450″ is in sale since Monday, February 22, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “archerplus” and is located in Lake Elmo, Minnesota. This item can be shipped to United States.

  • Brand: Cal Spas
  • MPN: HEA14100450
  • Type: Hot Tub
Spa Control Hot Tub Heater and Controller 5.5kw 230VAC
May 21st, 2018 by admin
Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


Spa Control Hot Tub Heater and Controller 5.5kw 230VAC


A full control system with heater. The item “Spa Control Hot Tub Heater and Controller 5.5kw 230VAC” is in sale since Monday, May 7, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “randomeyd” and is located in Eau Claire, Wisconsin. This item can be shipped to United States.

  • Brand: Presair
  • MPN: Does Not Apply
  • Shape: 1 7/8″ ID, 2 3/8″ OD PVC
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Voltage: 240V
  • Heater Size: 15″ long x 2.25″ outside diameter w/ 2″ pvc unions
  • Includes: all new power cords
Hot Tub Heater Control Digital Spa Controller Pack SMTD2000 ACC 5.5kW 120/240V
Apr 29th, 2018 by admin
Hot Tub Heater Control Digital Spa Controller Pack SMTD2000 ACC 5.5kW 120/240V


Hot Tub Heater Control Digital Spa Controller Pack SMTD2000 ACC 5.5kW 120/240V


Hot Tub Heater Control Digital Spa Controller Pack SMTD2000 ACC 5.5kW 120/240V


Hot Tub Heater Control Digital Spa Controller Pack SMTD2000 ACC 5.5kW 120/240V


A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5.5kw heater, 15 long, standard size. Make us an offer! This Smartouch Digital Control comes with 5.5kw 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Topside drops into 2.5×6.5 cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and a second pump, and an air blower or 3rd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with new power cords for your main 2-speed pump and second pump, with quick disconnect plugs to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long stainless steel high flow 2 heater, with 5.5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 2000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD2000 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5.5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD2000. 15″ stainless steel high flow heater with standard threaded couplings for 2″ PVC plumbing. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. (Extension cords available at extra cost) Drops into 2.2×6.2 cutout. Two (2) pump 4-wire power cords, 48 long with quick disconnect AMP plugs and motor connectors. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. Check out my other items. Be sure to add me to your favorites list. The item “Hot Tub Heater Control Digital Spa Controller Pack SMTD2000 ACC 5.5kW 120/240V” is in sale since Monday, February 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributors-fulfillment” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: ACC, Applied Computer Controls
  • MPN: smtd2000
  • Model: SMTD 2000
  • Controls: main pump, air blower, second pump, light, ozone
  • Voltage: 240 volt or 120 volt, changeable
  • Heater Size: High Flow 2″ 15 inch
  • Warranty: Factory Warranty by ACC 24 months *
  • Display: Digital Topside Keypad 3.25×7.25″
  • Dimensions: 14.6Tx15.4Wx5.5″D
  • Includes: All Power Cords
  • Intended Use: For portable spas, mounted under redwood skirt.
  • Payment: Paypal
»  Substance: WordPress   »  Style: Ahren Ahimsa