»
S
I
D
E
B
A
R
«
Hot Spring Tiger River Spa FreshWater 3 III Ozonator PN 72602 OZONE COMPLETE KIT
Aug 12th, 2019 by admin
Hot Spring Tiger River Spa FreshWater 3 III Ozonator PN 72602 OZONE COMPLETE KIT


Hot Spring Tiger River Spa FreshWater 3 III Ozonator PN 72602 OZONE COMPLETE KIT


Watkins Part# 72602 FreshWater III (3) Ozonator – Complete Ozone System. Watkins HotSpring Factory FreshWater III Corona Discharge (CD) High-Output Ozone System for all HotSpring, Tiger River, HotSpot, Limelight, and Solana Spas. OEM Replacement Ozone System (Complete). What’s included: Newly designed and more “compact ” Freshwater 3 High Output Ozone System w/ Power Cord, Injector, Tubing & Check Valve. Description: This newly designed 2011 FreshWater® III CD Ozonator effortlessly replaces the older FreshWater II High Output ozonator taking up half the space while packing twice the punch. Never had an ozonator you say? This will be the last ozonator you’ll ever need. Our Freshwater® III CD Ozonator produces ozone differently than the typical ultraviolet style ozonators found today. Our corona discharge method of ozone generation will crank out a higher concentration (PPM) of ozone and that concentration level won’t decrease over the years like the ultraviolet style ozonators. Easy to install, the new Freshwater III CD Ozonator’s bubbles will give your spa water that “rain fresh” fragrance. Installation time is about 45 minutes. Power Consumption: 8 watts. Picture 2 is a picture of the older FWIII (black, rounded top). The main picture is of the NEW STYLE (compact rectangle shape, which was released in 2nd Quarter 2011). If you have a pre 1997 Hot Spring or Tiger River, the ozonators were most often hard wired into the circulating pumps power cord. Includes: ozone system, injector, ozone tubing, check valve, hose clamps, hardware, and install instructions. Fits in ALL HotSpring & Tiger River and Limelight Spas. Grandee, Vista, Envoy, Aria, Sovereign, Vanguard, Prodigy, Classic, Jetsetter, Landmark. Caspian, Sumatran, Siberian, Bengal, Khyber. Glow, Pulse, Flair, Bolt. Solana & HotSpot Spas. Will fit in these model spas; however, installation requires a different injector (for non-circulation pump spas). Detailed instructions included with the generator and it is fairly easy to install with just a few tools. The spa does need to be drained prior to install. The Freswater III Ozonator will only fit 3 types of spas made by Watkins: Hot Spring Spas, Tiger River, & Limelight Spas. The unit may be adapted to fit all Hot Spot, Solana spas. Keep your FreshWater System Sparkling Clear! (read about the silver ion cartridge in the product listing in our store). On ORDERS of any TWO (2) Items Totaling. See listings for details. DONT SEE AN ITEM? Subscribers to our store and receive “Private Subscriber Discounts” news-blasts. Let us know if you need product overseas or across borders. We’ll see what we can do (no chemicals sales internationally — only parts, accessories, miscellaneous)! These are the buyers responsibility. We aim to please our goal is to get you back in hot water, enjoying your spa! The item “Hot Spring Tiger River Spa FreshWater 3 III Ozonator PN 72602 OZONE COMPLETE KIT” is in sale since Monday, April 23, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spaguys247″ and is located in Prescott, Arizona. This item can be shipped to United States.

  • Brand: Watkins
  • MPN: 72602
  • Product Type: Pool & Spa Parts & Accessories
  • Water Treatment Products: Ozonator
  • Ozone System: FreshWater
  • Product+Type: ozone+freshwater
  • Part Number: 72602
AquaFill Auto Fill Electronic Water Leveler for HotTubs- Complete Kit- Made USA
Jul 13th, 2019 by admin
AquaFill Auto Fill Electronic Water Leveler for HotTubs- Complete Kit- Made USA


AquaFill Auto Fill Electronic Water Leveler for HotTubs- Complete Kit- Made USA


The Hot Tub AquaFill is designed for use with above-ground portable spas, and like fountains, they require manual filling. The greatest drawback to filling your hot tub with a garden hose is the frequency of overflows and flooding associated with getting preoccupied with other tasks and forgetting to turn off the hose faucet. Water damage and homeowner policies can be a volatile issue in many said according to Don Griffin of the National Association of Independent Insurers, a trade association for property-casualty insurers. Chief among the cause of pool or hot tub overflows is forgetting to turn off the hose when filling or malfunctioning mechanical float control systems. These are nothing more than standard toilet tank floats (Fluidmaster) which often malfunction and will not shut off as they were designed to, resulting in an overflow and possible lawsuits from neighbors. The AquaFill has no troubleshooting list. It was designed to turn on and off one million times. The AquaFill float sensor is used in the canning and bottling industry and has a failure rate of only. The AquaFills sensor switch is designed to handle a continuous voltage of 120v. The pool Aquafill uses only 6 volts and the pond and fountain AquaFill only 24 volts. The Hot Tub AquaFill installs in approximately one hour and fits comfortably in any hot tub equipment space. Once installed, you will never have to fill your hot tub by hand again. The water level in the hot tub flows into the AquaFill assembly and into the float chamber where the water level equalizes. The assembly can be telescoped up and down for the purpose of adjusting the water level in the hot tub. The solenoid valve can be plumbed into either a return line or supply line for adding water to the hot tub as needed. The water supply to the solenoid can be as small as 3/8 the inch plastic or copper tubing, making it easy to hide in a variety of ways. The tubing can also be inserted in the joints of tile on a patio. The hot tub kit comes with the AquaFill assembly, 24-volt transformer, a solenoid valve (backflow preventer) and locks nut with rubber gasket seal. In the basic hot tub installation, drill a hole through the shell 5 to 6 inches below the desired water level. The threaded the male adapter through the hole and the rubber washer, and the rounded washer is tightened down to hold the assembly in place. Once installed, the assembly can then be telescoped up or down to establish the desired water level. In most cases, it will be necessary to have an electrician wire an 110 volt AC plug in the equipment compartment for the 24-volt transformer to plug into to supply the power for the Aquafill switch to operate the solenoid valve. The solenoid valve (w/backflow preventer) is plumbed into the supply or return lines. The item “AquaFill Auto Fill Electronic Water Leveler for HotTubs- Complete Kit- Made USA” is in sale since Wednesday, September 30, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “aquamediacorp” and is located in Escondido, California. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Model: AquaFill Hot Tub Auto Fill AF-HT-002
  • Country/Region of Manufacture: United States
  • Type: Hot Tub Auto fill
  • Capacity: Fits all Hot Tubs
  • MPN: AF-HT-002
  • Brand: AquaFill by Aquamedia Group
DIY Sauna Kit 6′ x 8′ Complete Sauna Room Package 7.5 Kw Electric Heater
Feb 2nd, 2019 by admin
DIY Sauna Kit 6' x 8' Complete Sauna Room Package 7.5 Kw Electric Heater



Complete Sauna Package 6′ x 8′ Sauna Room. Complete Sauna kit for pre-framed 6′ x 8′ room. Includes insulated cedar sauna door with tempered glass window, brass door hardware kit for rough opening 26″ x 78″. 7.5 Kw Stainless Steel Sauna Heater with digital timer. Full A+ Better, Clear kiln dried T & G Western Red Cedar 7′ length boards for vertical installation of walls and ceiling. Clear western red cedar for benches (upper and lower 19 deep benches). 2 x Light kit, thermometer, aluminum vapor foil, vent kit included, heater guard, floor interlocking PVC tiles. For Room Dimensions : 72″ wide x 96″ length x 84 high. 7.5 KW HSH Sauna Heater. 100% clear wester red cedar wood with no sap or knots! All sauna kits come equipped with safety guard! CUSTOM SIZES AVAILABLE Call 1 800 759 8990! The item “DIY Sauna Kit 6′ x 8′ Complete Sauna Room Package 7.5 Kw Electric Heater” is in sale since Saturday, December 19, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sauna-heaters” and is located in Winnipeg, Manitoba. This item can be shipped to United States, Canada.

  • UPC: 608819221557
  • Brand: Homecraft
  • MPN: PN-Sauna-DIY- 6ft x 8ft
DIY Sauna Kit 7′ x 8′ Complete Sauna Room Package 9 Kw Electric Heater
Feb 2nd, 2019 by admin
DIY Sauna Kit 7' x 8' Complete Sauna Room Package 9 Kw Electric Heater


Complete Sauna Package 7′ x 8′ Sauna Room. Complete Sauna kit for pre-framed 7′ x 8′ room. Includes insulated cedar sauna door with tempered glass window, brass door hardware kit for rough opening 26″ x 78″. 9 Kw Stainless Steel Sauna Heater with digital timer. Full A+ Better, Clear kiln dried T & G Western Red Cedar 7′ length boards for vertical installation of walls and ceiling. Clear western red cedar for benches (upper and lower 19 deep benches). 2 x Light kit, thermometer, aluminum vapor foil, vent kit included, heater guard, floor interlocking PVC tiles. For Room Dimensions : 84″ wide x 96″ length x 84 high. 9 Kw HSH Sauna Heater. 100% clear wester red cedar wood with no sap or knots! All sauna kits come equipped with safety guard! CUSTOM SIZES AVAILABLE Call 1 800 759 8990! The item “DIY Sauna Kit 7′ x 8′ Complete Sauna Room Package 9 Kw Electric Heater” is in sale since Saturday, December 19, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sauna-heaters” and is located in Winnipeg, Manitoba. This item can be shipped to United States, Canada.

  • UPC: 608819221540
  • Brand: Homecraft
  • MPN: PN-Sauna-DIY-7ft x 8ft
VS510 Balboa water group complete spa pack RETROFIT KIT for 2pumps + blower
Jan 16th, 2019 by admin
VS510 Balboa water group complete spa pack RETROFIT KIT for 2pumps + blower


VS510 Balboa water group complete spa pack RETROFIT KIT for 2pumps + blower


Balboa Water Group® Bundled System. VS510Z Value Pack Retrofit Kit (54218-Z). BalboaWG® VS510Z Spa pack controller with 5.5kw/240V Heater with M7 system technology +. Topside panel Serial Standard, 7-buttons JET1, JET2, BLOWER, MODE, LIGHT, WARM, COOL. + 4 x AMP cords. Balboa WG® Value Series (VS) presentation models. Built on patented M7 sensor technology. US & Canadian safety approvals. Custom designed plastic enclosure. 120/240v convertible power supply. High reliability – built-in & tested. Easy to install & service. 10.56 x 12.26 x 4.60. 5.5 Kw Stainless Steel (4kW on request). Duplex Digital Light Duplex Mini Series Standard Digital (510s only). Value Series Comparison Chart. 24 Hr or 3°F above set temp shut off. Pump 1 (max 12A). Pump 2 (max 12A). Spa Light Control FiberEFX. Next Generation of Entry Level Hot Tub Control Systems. The Value Series (VS) family of hot tub control systems. Were designed using Balboas patented M7 temperature. And flow sensor technology and a new universal control. These features increase the reliability, ease of. Installation and serviceability of the control. Designed for Easy Installation and Service. The VS family is based on a common universal control. Platform, which increases feature flexibility while reducing. Installation and configuration problems. The VS family has. Exceptionally good feature flexibility, so its performance is. Competitive with many other higher end products. Flexible, Highly Reliable, Feature Rich. The systems have a plastic enclosure to eliminate water. Connectors are built onto the circuit board. Minimizing wires and simplifying service. Models have controls for a single two-speed pump or. An additional blower or pump. Supply that can be. Wired for 120 or. 240 volts, a 5.5kW. Why The Value Pack Retrofit Kit. The Value Pack Retrofit kit is based on the Value Series (VS) family of hot tub controls which were designed using Balboa’s patented M7 temperature and flow sensor technology. The VS systems have a plastic enclosure to eliminate corrosion and suppress water intrusion. Also, the connectors are built onto the circuit board to minimize wires and simplify service. The Value Pack is meant to be installed by a spa professional who can rest easy knowing he’s working with a kit that is known for reliability, ease of installation and serviceability. Replaces failure-prone mechanical pressure/flow switch. Can be plumbed to either suction or pressure side of pump. M7 flow/ temperature sensors. Yes (5.5kW Stainless Steel Flow Thru). Yes (No Pressure Switch). Yes or 1spd Pump. 6.32 x 2.25. 7.35 x 3.26. 4.34 x 1.58. 16.05 x 5.72. 18.67 x 8.28. 11.02 x 4.01. Cords, Bezel, one LED light assembly. + 2 x AMP cords. The VS510 system can operate. Pump1 – 1 or 2 speeds. Pump2 – 1 speed. Heater 5.5kw/240V or 1.2kw/120V. 12V AC spa Light Option (Mood EFX or FiberEFX). Optional Dolphin remote control. COMPLETE GENUINE PRODUCT FROM BALBOA WG®. Made in USA, no refurbished items. Never use or try. Item is always subjected to daily inventory changing. In-case of back-order product, you will advise as soon as possible. Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4days with tracking#. CanadaPost + your local Postal services. International surface/boat parcel 4-6 WEEKS, with tracking#. XpressPost International – EMS – 4-10 days, with tracking#. The item “VS510 Balboa water group complete spa pack RETROFIT KIT for 2pumps + blower” is in sale since Monday, August 29, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines & piscines thermales\Spas & bains tourbillons”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.

  • Marque: Balboa
  • Pays de fabrication: États-Unis
  • Modèle: VS510
  • Numéro de pièce fabricant: 54218-Z
Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade
Jul 13th, 2018 by admin
Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade


Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade


Made by Balboa WaterGroup. GS510DZ Complete Control System. This system consists of a GS510DZ control box (kW), a VL801D touch panel (18.7cm x 8.3cm) and 5 cables in total, 1 x 2 speed pump cable, 3 x 3 core cables for the circ pump / blower or ozone cable and a 2 pin light cable. This panel is programmable, which means you can set the time that it filters using the mode / program button. This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don’t need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working. The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new. If you need more help getting the right Balboa parts then please get in touch. The item “Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade” is in sale since Friday, July 6, 2018. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “tmc_uk_rdeamxp” and is located in Duns. This item can be shipped worldwide.

  • Circulation Pump: Ready
  • Length (cm): 50
  • Ozone: Ready
  • Topside Controller Included: VL801D
  • Radio TV/AV: Ready
  • Width (cm): 12
  • Pump 1: Single or dual speed Pump
  • Light option: 12 Volt
  • Pump 3: No Connection
  • Pump 2: Single Speed
  • Includes: All Cables
  • Air Blower: Ready
  • MPN: PK-51044
  • Brand: Balboa
  • Heater: 3kw M7
  • Height (cm): 27
  • Plumbing Size (Inch’s): 2
DIY Sauna Kit 7′ x 9′ Complete Sauna Room Package 9 Kw Electric Heater
Mar 23rd, 2018 by admin
DIY Sauna Kit 7' x 9' Complete Sauna Room Package 9 Kw Electric Heater


Complete Sauna Package 7′ x 9′ Sauna Room. Complete Sauna kit for pre-framed 7′ x 9′ room. Includes insulated cedar sauna door with tempered glass window, brass door hardware kit for rough opening 26″ x 78″. 9 Kw Stainless Steel Sauna Heater with digital timer. Full A+ Better, Clear kiln dried T & G Western Red Cedar 7′ length boards for vertical installation of walls and ceiling. Clear western red cedar for benches (upper and lower 19 deep benches). 2 x Light kit, thermometer, aluminum vapor foil, vent kit included, heater guard, floor interlocking PVC tiles. For Room Dimensions : 84″ wide x 108″ length x 84 high. 9 Kw HSH Sauna Heater. 100% clear wester red cedar wood with no sap or knots! All sauna kits come equipped with safety guard! CUSTOM SIZES AVAILABLE Call 1 800 759 8990! The item “DIY Sauna Kit 7′ x 9′ Complete Sauna Room Package 9 Kw Electric Heater” is in sale since Saturday, December 19, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sauna-heaters” and is located in Winnipeg, Manitoba. This item can be shipped to United States, Canada.

  • UPC: 608819221533
  • Brand: Homecraft
  • MPN: PN-Sauna-DIY-7ft x 9ft
Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade
Jan 5th, 2018 by admin
Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade


Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade



Made by Balboa WaterGroup. GS510DZ Complete Control System. This system consists of a GS510DZ control box (kW), a VL801D touch panel (18.7cm x 8.3cm) and 5 cables in total, 1 x 2 speed pump cable, 3 x 3 core cables for the circ pump / blower or ozone cable and a 2 pin light cable. This panel is programmable, which means you can set the time that it filters using the mode / program button. This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don’t need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working. The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new. If you need more help getting the right Balboa parts then please get in touch. Balboa GS510DZ Complete Control System and VL801D Panel – Hot Tub DIY Upgrade. PCB’s and Parts. We do not accept bank transfer, cheques or cash. All payments must be cleared before we release any orders. Hopefully you won’t need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance. If you have any questions about items received please call our customer service team. Items will need to be unused and in a saleable condition, with their original packaging and with all component parts and any promotional items received. Select the reason for the return. Pack the item carefully. Contact for collection or post back to contact address. Please check this listing page carefully as the answer is usually there. 28-10-2017 17:54:42. The item “Balboa GS510DZ Complete Control System and VL801D Panel Hot Tub DIY Upgrade” is in sale since Friday, March 04, 2016. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “hottubdiy” and is located in Redruth. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand.

  • Brand: Balboa
  • MPN: PK-51044
  • Length (cm): 50
  • Width (cm): 12
  • Height (cm): 27
  • Plumbing Size (Inch’s): 2
  • Includes: All Cables
  • Pump 1: Single or dual speed Pump
  • Pump 2: Single Speed
  • Pump 3: No Connection
  • Air Blower: Ready
  • Heater: 3kw M7
  • Light option: 12 Volt
  • Ozone: Ready
  • Topside Controller Included: VL801D
  • Circulation Pump: Ready
  • Radio TV/AV: Ready
2KW Balboa GS500Z Complete Control System Hot Tub DIY
Dec 2nd, 2017 by admin
2KW Balboa GS500Z Complete Control System Hot Tub DIY


Made by Balboa WaterGroup. GS500Z Complete Control System. This system consists of a GS500Z control box (2kW Heater), a VL200 mini control Panel (11cm x 4cm) and 3 cables, 1 x 2 speed pump, 1 circ pump / blower or ozone cable and a 2 pin light cable. Please call if you would like our optional upgrade of the larger VL240 (MVP240) 3 button panel instead, the dimensions are 13.4cm x 4.9cm and is oval shaped. This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don’t need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working. The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new. If you need more help getting the right hot tub part then please get in touch. 2KW Balboa GS500Z Complete Control System – Hot Tub DIY. PCB’s and Parts. We do not accept bank transfer, cheques or cash. All payments must be cleared before we release any orders. Hopefully you won’t need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance. If you have any questions about items received please call our customer service team. Items will need to be unused and in a saleable condition, with their original packaging and with all component parts and any promotional items received. Select the reason for the return. Pack the item carefully. Contact for collection or post back to contact address. Please check this listing page carefully as the answer is usually there. 30-10-2017 10:59:35. The item “2KW Balboa GS500Z Complete Control System Hot Tub DIY” is in sale since Friday, June 12, 2015. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “hottubdiy” and is located in Redruth. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.

  • Brand: Balboa
  • MPN: PK-51043
  • Length (cm): 50
  • Width (cm): 12
  • Height (cm): 27
  • Plumbing Size (Inch’s): 2
  • Includes: All Cables
  • Pump 1: Single or dual speed Pump
  • Pump 2: No Connection
  • Pump 3: No Connection
  • Air Blower: No Connection
  • Heater: 2kw M7
  • Light option: 12 Volt
  • Ozone: Ready
  • Topside Controller Included: VL200 (Optional VL240)
  • Circulation Pump: Ready
  • Radio TV/AV: Ready
Balboa GS523DZ Complete Control System and Panel Hot Tub DIY Upgrade
Dec 1st, 2017 by admin
Balboa GS523DZ Complete Control System and Panel Hot Tub DIY Upgrade



Made by Balboa WaterGroup. GS523DZ Complete Control System. This system consists of a GS523DZ control box (kW), a VL801D touch panel (18.7cm x 8.3cm) and 6 cables in total, 1 x 2 speed pump cable, 4 x 3 core cables for the pumps / blower or ozone cable and a 2 pin light cable. The Balboa VL801D panel is a deluxe panel which means it has a adjustable clock that displays on the screen as well as 2 programmable filter times, this panel also includes 3 modes standard, economy and sleep modes. All this is shown on a large LCD display. Connection Type RG45 (data cable type). Button Configuration: TIME, MODE, WARM, COOL, BLOWER, JETS 1, LIGHT and JETS 2. Chinese Hot Tub Upgrades. If you have a Chinese hot tub system that is running 3, 4 or 5 pumps then this is the system for you, its easy to plumb in with a little advice and is far superior to any Chinese system currently available on imported hot tubs. This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don’t need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working. The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new. Balboa GS523DZ Complete Control System and Panel – Hot Tub DIY Upgrade. PCB’s and Parts. We do not accept bank transfer, cheques or cash. All payments must be cleared before we release any orders. Hopefully you won’t need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance. If you have any questions about items received please call our customer service team. Items will need to be unused and in a saleable condition, with their original packaging and with all component parts and any promotional items received. Select the reason for the return. Pack the item carefully. Contact for collection or post back to contact address. Please check this listing page carefully as the answer is usually there. 30-10-2017 09:50:32. The item “Balboa GS523DZ Complete Control System and Panel Hot Tub DIY Upgrade” is in sale since Friday, June 12, 2015. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Hot Tubs”. The seller is “hottubdiy” and is located in Redruth. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Japan, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand.

  • Brand: Balboa
  • MPN: PK-52303
  • Length (cm): 50
  • Width (cm): 12
  • Height (cm): 27
  • Plumbing Size (Inch’s): 2
  • Includes: All Cables
  • Pump 1: Single or dual speed Pump
  • Pump 2: Single Speed
  • Pump 3: Single Speed
  • Air Blower: Ready
  • Heater: 3kw M7
  • Light option: 12 Volt
  • Ozone: Ready
  • Topside Controller Included: VL801D
  • Circulation Pump: Ready
  • Radio TV/AV: Ready
»  Substance: WordPress   »  Style: Ahren Ahimsa