Balboa – VS501Z Control System w/ Topside controller 54220-Z hot tub spa heater. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “nads070″ and is located in this country: US.
Because these are built to order, please allow a few days to build and test BEFORE. More info at: Spa Pumps And More. 15″ 5.5kw 5500 watt High-Flow Heater, 3.25 x 7.25″ Digital Topside Display/Keypad. Rated for 230 volts 4-wire incoming power or 115 volts, it is changeable. From Spa Pumps and More. This is the outdoor rated, UV resistant, Weather resistant model in grey color, with KP-2010 topside. Note: topside front is waterproof and is meant to mount into a panel with rear protected from the weather. Rear of topside is not waterproof. For more information look at Spa Pumps And More. Their part number is SMTD1000GR. Nice large contactor in the SMTD1000 switches the 24 amp heater on-off, this is a huge advantage over all other control brands that have a tiny relay on the motherboard to do the switching. Display: Digital Topside Keypad 3.25×7.25. Heater: High Flow 2 15 inch 5kw. Dimensions: 14.5T x 15.4W x 3D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. This Smartouch Digital Control comes with 15 hi-flow heater, Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. 7.25 x 3.25″ topside drops into 6.2 x 2.2″ cutout in your spa. For 4-wire 240 volts or 3-wire 115 volts sources only. The listed unit is not for 3-wire 230v; please message if you need 3-wire 230. 3-wire is less common and is built to order, takes an extra days time, just message us if you want 3-wire, please. A power source from the house that is 4-wire has a true neutral, a ground, and 2 hots. 4-wire may be branched to provide 230v to devices as well as provide 115v to other devices, via the Neutral wire. A European style 3-wire power source has no neutral, and only a ground wire and 2 hot wires, and can not provide 115 volts to any device therefore 3-wire systems are limited to being all 230 volts. This is a high flow system for 1-1/2″ or 2″ pvc pipe size plumbing systems and requires a minimum flow of 20 GPM, it is NOT for low flow systems with 3/4″ or 1″ plumbing. This high flow heater can NOT be modified to work on low flow plumbing. Runs a main 2 speed spa pump, and an air blower (or 2nd single speed pump), and spa light, and has an output for ozonator or ionizer or any other non-switched device. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using wire nuts. Includes 15 inch long x 2.25 diameter stainless steel high flow heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second 1-speed pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Intended to be mounted under the redwood skirt of a portable spa, not out in the rain, please note. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel flow-through heater with standard threaded couplings. Digital display keypad (topside) 7.25 x 3.25″ with 57″ long cable. Extension cords available at extra cost, message us please. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. 4-wire is Neutral, Ground, L1, L2. Air Blower pigtail with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator 7 pigtail with quick disconnect AMP plug, 18 gauge wire. Light 7 pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual (can be viewed on the ACC-spas website if you care to). Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. PROGRAMMING GUIDE and Wiring Diagrams can also be viewed on the ACC-spas website if you are interested. So message us if you want 3-wire and we’ll respond with cost and leadtime. More info at Spa Pumps And More. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Compatible with Sundance Spas 880, 780, and 680 Series. Used but in working condition. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “pziperov” and is located in this country: US. This item can be shipped to United States.
Because these are built to order, please allow a few days to build and test. More info at: Spa Pumps And More. NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 12″Tx15″Wx5D approximately. Includes the 3.25×7.25″ large BACKLIT XP-2020 topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. For more information look at Spa Pumps And More. Their part number is ePack. Alternate part number is SMTD1500. Model: ePack SMTD 1500. Display: Digital Topside Keypad 3.25″ x 7.25″. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. More details at Spa Pumps And More. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Spas Smart Tub System. P/N 6000-487/521 & 6560-381. W/Cables & Controller – You are getting what is in the photos. Compatible with Balboa controls after 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “vhubka68″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
Spas Smart Tub System. W/Cables & Controller – You are getting what is in the photos. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “vhubka68″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
BALBOA DIGITAL TOPSIDE CONTROLLER & OVERLAY DECAL. For Dream Maker & AquaRest Spas. Topside Controller – # 307012. Overlay Decal – # 307013. We sell other parts too. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “ecommercespashop” and is located in this country: US. This item can be shipped to United States.
Infrared Sauna Heater Controller. Digital Sauna Controller for 120 VAC Infrared Sauna Heaters. With Aux Control Feature. Equipped with Aux Output 120 VAC 10 amps. This output is controlled by AUX button and is not associated with sauna cycle. Can be used for lights, fan, radio, etc. Once turned on will remain on as long as it is not turned off by sauna user. The main controller output is 110-120 VAC ideal for infrared sauna panels or any 110-120 VAC sauna heater. Compact, energy efficient electronic Sauna controller for 120 VAC Electric Sauna Heaters. Precise time and temperature read-out and control. Controller automatically stores last used setup data for next time use. Convenient, independent one from another three users presets allowing immediate start-up with parameters set differently for each one. Two independent, clear and bright displays for time and temperature. Easily configurable between Celsius or Fahrenheit readouts. Series of self-diagnostics and alarms for extended safety. Auto- detects temperature sensor failure, prevents sauna operation in over temperature condition. Fits standard 3-gang electrical box. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sauna-heaters” and is located in this country: CA. This item can be shipped to United States, Canada.
Because these are built to order, please allow 3-4 days to build and test BEFORE. More info at: Spa Pumps And More. A very nice replacement control works on most any hot tub or portable spa, replacing your old control and heater. Includes stainless steel high flow 5.5kw heater, 15 long, standard size. Nice large contactor in the SMTD2000 switches the 24 amp heater on-off, this is a huge advantage over all other control brands that have a tiny relay on the motherboard to do the switching. For more information look at Spa Pumps And More. Their part number is SMTD2000. Display: Digital Topside Keypad 3.25×7.25. Heater: High Flow 2 15 inch 5kw. Dimensions: 14.5T x 15.4W x 5.5″D (5.5″ deep if you include the mounting feet, the deepest part). Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower, Light, and a second pump (which can be a 2-speed). Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. Additional detail from Spa Pumps And More. This Smartouch Digital Control comes with 5.5kw 15″ heater, Large 3.25×7.25″ Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Topside drops into 2.2×6.2 cutout in your spa. Intended for use under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. Runs a main 2 speed spa pump, and a second pump (can be a 2-speed or single speed), and an air blower or 3rd pump, and spa light, and has an output for ozonator or ionizer or any other non-switched device. This large relay takes the load of the heater off the motherboard and is a major advantage over other spa controls. Comes with new power cords for your main 2-speed pump and second pump, with quick disconnect plugs to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using wire nuts. Includes 15 inch long stainless steel high flow 2 heater, with 5.5kw Incoloy element. Can be used on 115/120v or 230/240 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 2000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115/120v or 230/240v. On a 115/120 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD2000 is set for 230/240v incoming power, 230/240v to the heater, and 230/240v to the pumps. 115/120v to the air blower, and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14.6″ tall, and 15.4″ wide, 5.5″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Smartouch Digital Control by ACC model SMTD2000. 15″ stainless steel high flow heater with standard threaded couplings for 2″ PVC plumbing. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. (Extension cords available at extra cost) Drops into 2.2×6.2 cutout. Two (2) pump 4-wire power cords, 48 long with quick disconnect AMP plugs and motor connectors. Air Blower power cord 3 foot with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. Additional info: Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. More info at Spa Pumps And More. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Digital TopSide Controller with Overlay Decal. For Dream Maker Spas. Measures 4.25 across. We sell additional Dream Maker Spa parts. Please send message with any questions / inquiries. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “ecommercespashop” and is located in this country: US. This item can be shipped to United States.