X- Spadition & X-Calibur Hot Tub Pump 1HP (1.5 SPL) with Pre-Installed “Thermal Wrap” Heater Jacket. Original Pump with Heat Jacket used in both X-Spadition and X-Calibur hot tubs manufactured by Quantum Spas of Northwest Florida. The X-Spa and X-Calibur models were originally supplied with our Thermal Wrap Heat Jacket. Motor Description: Mfg: Century HP: 1 – Service factor 1.0 (1.5hp SPL) RPM: 3450 Single Speed 115 Volts, 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL10HSDCS 1 HP (1.5HP SPL) 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. This pump can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “X-Spadition Hot Tub Pump, 1hp, 1.5 SPL, Ultra Jet 1.5 withThermal Wrap Heat Jacket” is in sale since Wednesday, February 10, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1.5HP SPL – 2″ with Pre-Installed “Thermal Wrap Heater Jacket. For spas and hot tubs requiring 1 speed motors Motor Description: Mfg: Century HP:1.5hp SPL RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL15SDCS2/2 5190-250 1.5 HP 2″ Center Suction x Side Discharge (1 1/2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Hot Tub Pump 1.5 hp SPL Ultima, Ultra Jet 2 with Thermal Wrap Heat Jacket” is in sale since Sunday, March 16, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1.5HP Full Rated 1 1/2″ with Pre-Installed “Thermal Wrap Heater Jacket. Dual Voltage 115/230 volts. For spas and hot tubs requiring 1 speed motors. Note: Typically this pump and motor is used on hot tubs requiring a 230 volt motor even though it’s dual voltage. For hot tubs requiring a 115 volt motor rated at 1.5HP, we recommend our single voltage motor. Motor Description: Mfg: Century HP: 1.5 – Service factor 1.0 (2hp SPL) RPM: 3450 Single Speed 115/230 Volts – dual voltage Amps: 16.5/8.3 HZ: 60 Frame: 56Z (48Y) Thermally Protected. Pump Description: Mfg: Vico/Balboa P/N. PKUL15SDCS, 5190-240, PKUL15HSDCS 1.5 HP (2HP SPL) 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet Spa Pump With Thermal Wrap (Heat Transfer/Recycling System). For more information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Can be used and retrofitted to work with most spas requiring 1.5 hp single speed, 3450 rpm, 115/230 volts pump motor. Note: Before ordering this “FULL RATED” 1.5 hp – as a replacement pump – make sure that your existing pump is not an “Uprated” pump. Sometimes manufactures call their pump a 1.5 HP when it’s really 1 hp. They call this an Uprated or SPL Pump. The motor amperage determines the true horse power. A 1 hp pump will be rated at approximately 11-14 amps. A 1.5 hp pump will be rated approximately 15 – 16 amps. Also note: you may think you have or need a pump for 2″ plumbing, when you actually need 1 1/2″. The pump connections measure larger than the actual pipe size used. The threaded connection on a 1 1/2″ pump measure 2 3/8″ – the threaded connections on a 2″ pump measure 3″. Unless otherwise specified, you will receive 1 1/2 pump connections. More about the – Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pump motors. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. Note: Thermal Wrap color may vary. The item “Hot Tub Pump 1.5hp (Full Rated) 1 1/2 Ultra Jet with Thermal Wrap Heat Jacket” is in sale since Thursday, February 27, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1HP with Pre-Installed “Thermal Wrap” Heater Jacket. For spas and hot tubs requiring 1 speed motors Direct replacement for Dreammaker Spa Motor Description: Mfg: Century HP: 1 – Service factor 1.0 (1.5hp SPL) RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL10HSDCS 1 HP (1.5HP SPL) 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System) For information on the “Thermal Wrap”. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Hot Tub Pump 1hp Ultra Jet 1.5 with Thermal Wrap Heat Jacket” is in sale since Friday, January 31, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa Hot Tub Pump 1.5HP SPL with Pre-Installed “Thermal Wrap” Heater Jacket. For spas and hot tubs requiring 1 speed motors Direct replacement for Dreammaker Spa Motor Description: Mfg: Century HP:1.5hp SPL RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL15SDCS 5190-240, PKUL15HSDCS 1.5 HP 1 1/2″ Center Suction x Side Discharge (2″ Connections available) 48 Frame. Great Value – Direct From The Manufacture of the patented Thermal Wrap – Heat Recycling System. Ultra Jet/Ultima Spa Pump With Thermal Wrap (Heat Transfer/Recycling System). For information on the “Thermal Wrap” Heat Jacket. It’s like free heat! Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including: Quantum, Dreammaker, FreeFlo, PDC spas, SoftTub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap, collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths, captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Hot Tub Pump 1.5 hp SPL Ultima, Ultra Jet 1.5 with Thermal Wrap Heat Jacket” is in sale since Wednesday, February 19, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Softub Hot Tub Pump Replacement – 1 HP with Pre-Installed “Thermal Wrap” Heater Jacket. Through the past 20+ years we have supplied hundreds of Thermal Wrap Heat Jacket systems for Softub applications. The Thermal Wrap Heat Jacket will heat your Softub as well if not better than the coil wrap. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : Century / A. Smith Horse Power: 1 Service Factor 1.0 (1.5hp SPL) Volts: 115 Amps: 11.8 – 12 RPM: 3450 Frame: 48Y HZ: 60 Stainless Shaft Thermally Protected. Pump: (pre-installed on motor) Mfg: Aqua-Flo P/N. 1 HP 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Hot Tub Pump 1hp, 1 Speed, Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Friday, November 25, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Oem sundance factory replacement pillow. Part # 6472-960, old part # 6455-465 / 6455-472. This pillow is for 850/880 series sundance spas from years 2001 – 2009. Includes pillow and insert. Pillow is attached to spa with 2 plastic screws. Pillow fits following models with select years: cameo, optima, maxxus, metro, marin. Pillow screws are not included.The item “Sundance Spa Wrap Around Pillow with Insert 6472-962″ is in sale since Friday, November 07, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapartsplus” and is located in Los Angeles, California. This item can be shipped to United States.
Hot tub pump replacement – 1 hp – “front discharge” with pre-installed “thermal wrap” heater jacket – complete as in first picture. Through the past 20+ years we have supplied hundreds of thermal wrap heat jacket systems for softub applications. The thermal wrap heat jacket will heat your softub as well if not better than the coil wrap. Please note: the last picture shown above is for illustration purposes only; the pump shown is a “side discharge” version and not a front discharge pump per this listing. Motor & pump with pre-installed thermal wrap. Hp: 1 – service factor 1.0 (1.5hp spl). 11 – 13.6 amps. Pump: (pre-installed on motor). 1 hp (1.5hp spl). 1 1/2″ bottom suction x front discharge – pump ports measure 2 1/4″ diameter and fit your existing plumbing connections. Note: also available with (center suction x side discharge) and (center suction x center discharge). More about the thermal wrap – heat transfer system. Tub water circulates through a serpentine path in the thermal. Wrap, collecting the heat generated by the pump/motor and recycles that. Heat to the tub water – were it belongs! Patented heating system for hot tubs/spas and whirlpool baths, captures. And recycles the waste heat “energy” produced by the pump/motor and. Delivers that heat to the hot tub or bath water. System will heat and maintain water temperature. The system allows the. Motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the usa! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the thermal. Wrap serves as the only heat source for many spas including:quantum, dreammaker, freeflo, pdc spas, softub and others. And retrofitted to work with most spas requiring 1 hp single speed, 3450. Rpm, 115volts pump motor. Even if you have an electric heater on your spa, the thermal wrap system will. Compliment your electric heater by capturing the waste heat generated by. Your pump motor and delivering that heat to the tub water, saving you. The thermal wrap will help maintain water. Temperature during normal filtering and heating cycles and while using. Your spa in high speed jet action.The item “Softub Pump 1hp, (1.5hp SPL) With Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Thursday, August 21, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States and to Canada.
1 1/2 center suction x center discharge – pump threads fit your existing pump disconnects/unions. 1 thermal wrap heat jacket. (top port on thermal wrap is plugged and not used for softub applications). (for making tubing connections between the 2 ports on thermal wrap to your existing coil/hose ports in your plumbing). Note: also available with (center suction x side discharge with built on tubing ports) or (center/ bottom suction x front discharge). Note: the last picture above shows a “side discharge” softub pump with built in tubing ports and shown for illustration proposes only. More about the thermal wrap – heat transfer system. Tub water circulates through a serpentine path in the thermal. Wrap, collecting the heat generated by the pump/motor and recycles that. Heat to the tub water – were it belongs! Patented heating system for hot tubs/spas and whirlpool baths, captures. And recycles the waste heat “energy” produced by the pump/motor and. Delivers that heat to the hot tub or bath water.
System will heat and maintain water temperature. Motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner.
No additional electrical circuits required for installation. Self draining design (required for whirlpool bath application). If the pump/connections pictured above do not exactly match the pump have?
Wrap serves as the only heat source for many spas including:quantum, dreammaker, freeflo, pdc spas, softub and others. And retrofitted to work with most spas requiring 1 hp single speed, 3450. Even if you have an electric heater on your spa, the thermal wrap system will. Compliment your electric heater by capturing the waste heat generated by. Your pump motor and delivering that heat to the tub water, saving you. The thermal wrap will help maintain water. Temperature during normal filtering and heating cycles and while using. Your spa in high speed jet action.
The item “Softub Hot Tub Pump 1hp, (1.5 SPL)Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Monday, August 04, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas.
This item can be shipped to United States and to Canada.
Hot tub pump replacement – 1 hp with pre-installed “thermal wrap” heater jacket. Through the past 20+ years we have supplied hundreds of thermal wrap heat jacket systems for softub applications.
1 thermal wrap heat jacket. (top port on thermal wrap is plugged and not used for softub applications). (for making tubing connections between the 2 ports on thermal wrap to your existing coil/hose ports in your plumbing). Note: also available with (center suction x side discharge with built on tubing ports) or (center/ bottom suction x front discharge). More about the thermal wrap – heat transfer system. Tub water circulates through a serpentine path in the thermal. Wrap, collecting the heat generated by the pump/motor and recycles that.
And recycles the waste heat “energy” produced by the pump/motor and. Delivers that heat to the hot tub or bath water. System will heat and maintain water temperature. Motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps.
And retrofitted to work with most spas requiring 1 hp single speed, 3450. Even if you have an electric heater on your spa, the thermal wrap system will. Compliment your electric heater by capturing the waste heat generated by. Your pump motor and delivering that heat to the tub water, saving you.
The thermal wrap will help maintain water. Temperature during normal filtering and heating cycles and while using.
Your spa in high speed jet action.The item “Softub Hot Tub Pump 1hp, Thermal Wrap Heat Jacket (replaces coil wrap)” is in sale since Friday, April 11, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can only be shipped to Canada.
