LX WP300-II – Spa Pump Post 2008 – 2 Speed 3.00Hp – 2.00 Suction. The LX WP series hot tub pumps are one of the most common two speed pumps used on Chinese manufactured hot tubs and swim spas as well as many other newer hot tub and swim spa brands appearing on the European market. The WP series of pumps will often serve as a circulation and booster pump, the low speed will circulate to heat and run filter cycles while the high speed will deliver a higher volume of water through hot tub jets. Dimensions L x W x H. 2 Speed – Circ + Boost. HEAD – H max. FLOW – Q max. 10 – 3.0 A. 2.2 / 0.4 kW. Cord / Plug Type. Center Suction, Side Discharge. The item “NEW LX WP300 ll 2 SPEED HOT TUB PUMP 3HP WATERWAY CHINESE SPA WHIRLPOOL” is in sale since Wednesday, October 7, 2020. This item is in the category “Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tubs”. The seller is “palmspas” and is located in CHESTERFIELD, United Kingdom. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
Softub Hot Tub Pump Replacement – Typically used in European market. 1 HP, 230 Volts, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : US Motors (AGH10FL1) Horse Power: 1 Service Factor 1.0 (Often labeled 1.5hp SPL) Volts: 220-240 Amps: 6.0/6.3 RPM: 2850/3450 Frame: 48Y – Thru Bolt W/Base. Pump: (pre-installed on motor) Mfg: Balboa – Front Discharge. 1 HP (1.5HP SPL) Bottom Suction X Front Discharge. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Pump 1HP 230V 6.0 Amps, 1 Speed with Thermal Wrap (replaces coil wrap)” is in sale since Tuesday, July 30, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped worldwide.
Softub Hot Tub Pump Replacement – Typically used in European markets. 1 HP, 230 Volts, 50HZ, Single Speed with Pre-Installed “Thermal Wrap” Heater Jacket. Motor & Pump with Pre-installed Thermal Wrap. Motor: Manufacture : US Motors (AGH10FL1) Horse Power: 1 Service Factor 1.0 (Often labeled 1.5hp SPL) Volts: 220-240 Amps: 6.0/6.3 RPM: 2850/3450 Frame: 48Y – Thru Bolt W/Base. Pump: (pre-installed on motor) Mfg: Aqua-Flo P/N. 1 HP (1.5HP SPL) 1 1/2 Center Suction x Center Discharge – pump threads fit your existing pump disconnects/split unions. 1 Thermal Wrap Heat Jacket: Pre-installed on motor. (top port on Thermal Wrap is plugged and not used for Softub applications). 32″ 3/8″ ID Tubing (for making tubing connections between the 2 ports on Thermal Wrap to your existing coil/hose ports in your plumbing). More about the Thermal Wrap – Heat Transfer System. Tub water circulates through a serpentine path in the Thermal Wrap. Collecting the heat generated by the pump/motor and recycles that heat to the tub water – were it belongs! This patented heating system for hot tubs/spas and Whirlpool Baths. Captures and recycles the waste heat “energy” produced by the pump/motor and delivers that heat to the hot tub or bath water. The Thermal Wrap system will heat and maintain water temperature. The system allows the motor to run cooler; increasing the motors longevity and efficiency. There are no moving parts and nothing to wear out. Made in the USA! Patented design, over 1,000,000 in use. Special thermal conductive inner heat transfer liner. Models available for most 48 frame thru bolt spa/hot tub and jetted bathtub pumps. Maintenance free – no moving parts to wear out. Helps keep motor cooler – increases motor longevity and efficiency. Cost less than electric heaters. No additional electrical circuits required for installation. Manufactured of non-conductive materials. Self draining design (required for whirlpool bath application). Note: If the pump/connections pictured above do not exactly match the pump have? Give me a call to discuss your application, we either have the pump you need or have other available options that will work for your application. Replacement pump and motor with the Thermal Wrap serves as the only heat source for many spas including. Quantum, Dreammaker, FreeFlo, PDC spas, Softub and others. Can be used and retrofitted to work with most spas requiring 1 hp single speed, 3450 rpm, 115volts pump motor. Even if you have an electric heater on your spa, the Thermal Wrap System will compliment your electric heater by capturing the waste heat. The Thermal Wrap will help maintain water temperature during normal filtering and heating cycles and while using your spa in high speed jet action. The item “Softub Pump 1HP 230 Volts, 6.0 Amps, 1 Speed withThermal Wrap replaces coil wrap” is in sale since Tuesday, July 30, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped worldwide.
This is a Brand New. 2 Speed Spa Pump center discharge with standard 1.5 PVC fittings. Directly from the manufacture insuring you a tremendous cost savings! We assemble and box these pumps in our store. 1.0 hp Motor 9.8 amps HI Speed 3.2 amps LO Speed. 1.5 standard thread PVC fittings with unions available. The Waterway wet-end is a direct fit with many brands. See chart for more info. A Perfect Cost Effective Replacement For the: American Products Americana II. Aqua Flo’HP’ Series FMCP Aqua Flo Circ Master CP Hayward 1700 Series Power Flo. Jacuzzi LTC, LTCU, Stingray K. Pac Fab Dynamo (no trap) Pac Fab Dynatron Premier220, 255, 255 Mark II Sonfarrel center discharge Sta Rite JS Series. Vico Ultima 1.5″ center discharge Waterway center discharge 1.5″ WMC JS Series. Note the output can be easily rotated to any 90 degree angle! Don’t forget the gaskets! Spa Pump Union Gaskets 1.5. A 1.5″ pump measures about 2 3/8″ across the pipe connections. Here at Pool & Spa Pump Depot we strive to provide you with the lowest cost brand new pool and spa pumps available anywhere. Perry Lusk Perry’s Pool Pump Pool & Spa Pump Depot 12846 N 19th Ave Phoenix, AZ 85029. The item “Waterway 3420410-15 1 hp. 2 Speed 1.5 Spa Pump Center Dischrg 115V NEW” is in sale since Wednesday, October 1, 2008. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “poolandspapumpdepot” and is located in Phoenix, Arizona. This item can be shipped to United States.
Spa Hot Tub Pump – 1HP for spas and hot tubs requiring 1 speed motors Direct replacement for Dreammaker Spa Motor Description: Mfg: Century HP: 1 RPM: 3450 Single Speed 115 Volts 13.6 amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description: Mfg: Vico/Balboa P/N. PKUL10SDCS, 788379783402 1HP 1 1/2 Center Suction x Side Discharge. Note: Also available with Center Suction x Center Discharge. Optional Thermal Wrap Heater Information. This pump is built ready for the Hydro Thermix “Thermal Wrap” system. Snap It On – Free heat. Plumbing barbs (nipples) are built into the pump wet end for Thermal Wrap tubing connection points. Note: this listing does not include the Thermal Wrap Heat Jacket or tubing and clamps. This replacement pump and motor with Installed Thermal Wrap serves as the only heat source for many spa including. Quantum Xspa, Excaliber, Dreammaker, FreeFlo, PDC spas, SoftTub and others. The Thermal Wrap system can be retrofitted to work with most spas. The item “Hot Tub Pump Vico Balboa, Ultima, Ultra Jet, 1HP, 1 Speed, 115V” is in sale since Monday, November 11, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa / Hot Tub Pump – 1.5HP (2HP SPL) for spas and hot tubs requiring 1 speed motor 115 Volt. Or 230 Volt 1.5 Center Suction x Side Discharge Motor Description. Mfg: Century / A. Smith HP: 1.5 Service Factor 1.0 (2hp SPL) RPM: 3450 Single Speed 115 Volts – 16.3 Amps 230 Volts – 8.3 Amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description. Ultra Jet Mfg: Vico/Balboa P/N. The item “Hot Tub Pump 1.5Hp (2HP SPL) 1 Speed, 1.5 Ultra Jet Vico/Balboa, 115/230V” is in sale since Monday, November 11, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
1 only at this special price! NEW hot tub controller, with electric heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, witn NEW 2-speed pump, 3.1 threaded connection with pair of pump unions, pump is 115 volt Motor, rated 8.8 amps 115 volts. Control comes with a set of plugs including a power cord for pump, and pigtails for air blower, light, and ozonator, and can run on 230 volt or 115 volt, it is convertible for voltages. 15″ stainless steel heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. 2-speed pump is 115v, 8.8 amps. Main control box is 11.5″Tx14″Wx4.5″D Includes the 2.5×5.5″ small topside, which requires cutout hole of 1.7 x 4.7 hole. The ribbon cable from topside to control box is 5ft long. We do not abandon our customers after the sale! We HAVE the field experience and staff to support you, our field service staff is ready to talk to you, answer questions, lend support, anytime! For repairing your portable spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! Factory default settings are setup for 230 volt power incoming, 230v to heater, 115v out to main 2 speed pump, 115v to air blower or 2nd pump, 12v out to light, 115v out to ozonator or other accessory. Like all spa controls, this is intended to be used on portable spas, mounted under the redwood skirt, not designed to sit out in the rain please note. Ships fast, in stock now. Pump, 2 speed 115v and a pair of pump union fittings. Check out my other items. Be sure to add me to your favorites list. The item “Spa Control Hot Tub Heater 230/115v 4kW ePack Controller Pack & 2 speed Spa Pump” is in sale since Tuesday, January 1, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “warehousethirtythree” and is located in Southern, California. This item can be shipped to United States.
Seating – 5/6 Persons. Jets – 30 Stainless Steel. MoonGlow Waterfall with Back-lit LED Light. 8 LED Cabinet Lights. Changing Color Inside Cabinet LED Lights. Cover – Deluxe Super Seal. The item “DreamMaker Jacuzzi, 5/6 Persons, 30 Jets, Digital Controls, 3hp/2 Speed Pump” is in sale since Thursday, February 15, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “ttri6456″ and is located in Lakeland, Florida. This item can’t be shipped, the buyer must pick up the item.
Spa / Hot Tub Pump – Aqua-Flo, FMHP, 1HP, 1.5″ Side discharge, 115 Volts 1.5″ Center Suction x Side Discharge Motor Description. Mfg: Century – BN25 HP: 1 RPM: 3450 Single Speed 115 Volts – 12 Amps HZ: 60 Frame: 48Y Thermally Protected Pump Description. 1.5 Center Suction x Side Discharge. Should you have any question or comments, please let me hear your thoughts. The item “Spa Hot Tub Pump Aqua-Flo, FMHP, 1Hp, 1 Speed, 1.5 Side Discharge, 115 Volts” is in sale since Sunday, December 25, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
Spa / Hot Tub Pump – 1.5HP (2HP SPL) for spas and hot tubs requiring 1 speed motor 115/230 Volts 1.5 Center Suction x Side Discharge Motor Description. Mfg: Century / A. Smith HP: 1.5 Service Factor 1.0 (2hp SPL) RPM: 3450 Single Speed 115 Volts – 16.3 Amps 230 Volts – 8.3 Amps HZ: 60 Frame: 56Z (48Y) Thermally Protected Pump Description. 1.5 Center Suction x Side Discharge. The item “Spa Hot Tub Pump 1.5Hp (2HP SPL) 1 Speed, 1.5 SD Aqua Flo FMHP, 115/230V” is in sale since Saturday, December 24, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jkc0853″ and is located in Houston, Texas. This item can be shipped to United States, Canada.
