Due to extremely high demand this control has a 4 to 7 day leadtime to be built, tested. NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 60hz 4-wire 230 volt with a neutral incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 12″Tx15″Wx5D approximately. Includes the 3.25×7.25″ large BACKLIT topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. Note: Control box is now black in color, not blue. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “angelessupply” and is located in this country: US. This item can be shipped to United States.
Applied Computer Controls, ACC Top Side Keypad/Display model KP-2010 fit spa control systems by ACC including the ePack, SMTD1000, SMTD1500. Ribbon cable attached is 5 feet long. Now in dark gray color. Replaces the older SC-2010. 14 pin connector on end of ribbon cable. The same connector ACC has used for many years on all their SC100, SC1500, and SC motherboards, for SMTD 1000, and ePack SMTD1500 controls. And also for the JR control. Connector measures 0.88″ wide (7/8″) x 0.23″ (1/4″) as shown in photos and is standard on all ACC controls. We also stock KP-2020tp, KP-1000, LX-1000 and all the other topsides by ACC, just ask. From Spa Pumps And More, please check out our other great deals. KP-2010 top side keypad/display, it is 3.25″ x 7.25″ and drops into a 2.2″ x 6.2″ cutout. You will receive the 3.25″ x 7.25″ if you order from this listing. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Applied Computer Controls, ACC Top Side Keypad/Display model KP-1000 fit spa control systems by ACC including the ePack, SMTD1000, SMTD1500. Ribbon cable attached is 5 feet long. Now in dark gray color. We also stock KP-2020, SC-2020, KP-2010, LX-1000 and all the other topsides by ACC, just ask. From Spa Pumps And More, please check out our other great deals. KP-1000 top side keypad/display, it is 2.5″ x 5.5″ and drops into a 1.9″ x 4.9″ cutout. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “distributorsfulfillment” and is located in this country: US. This item can be shipped to United States.
Balboa Water Group® Bundled System. BP501 bundle kit G6405 with TP500 keypad. Direct replacement of VS501Z Value Pack Retrofit Kit (54217-Z). BalboaWG® BP7 Spa pack controller 56485 with 4.0kw/240V Heater with M7 system technology +. Topside panel TP500, 6-buttons JET, AUX, LIGHT, MENU, WARM, COOL. + 2 x AMP cords (1x 2-spd pump + 1x 1-spd pump or blower). The Next Generation of BP Hot Tub Control Systems is finally here. The BP family of hot tub control systems were designed using Balboas patented M7 temperature and flow sensor technology and a new universal control platform. These features increase the reliability, ease of installation and serviceability of the control. Circ or Non-Circ Systems. With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brands non-low flow system when you match it with any TP or SpaTouch topside panel. This system can also be used as 120v or 240v. This system can operate. Pump1 single or dual speed. Pump2 single or dual speed OR blower. COMPLETE GENUINE PRODUCT FROM BALBOA WG®. Made in USA, Brand new objects. Item is always subjected to daily inventory changing. In-case of back-order product, you will advise as soon as possible. Item location: Memphis, TN. + your local Postal services. The item “BP501 Balboa WG complete spa pack RETROFIT KIT with TP500 keypad, PN 54217″ is in sale since Tuesday, January 31, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “sleco69″ and is located in Memphis, Tennessee. This item can be shipped worldwide.
Balboa Water Group® Bundled System. BP501 bundle kit G6405 with TP500 keypad. Direct replacement of VS501Z Value Pack Retrofit Kit (54217-Z). BalboaWG® BP7 Spa pack controller 56485 with 4.0kw/240V Heater with M7 system technology +. Topside panel TP500, 6-buttons JET, AUX, LIGHT, MENU, WARM, COOL. + 2 x AMP cords (1x 2-spd pump + 1x 1-spd pump or blower). The Next Generation of BP Hot Tub Control Systems is finally here. The BP family of hot tub control systems were designed using Balboas patented M7 temperature and flow sensor technology and a new universal control platform. These features increase the reliability, ease of installation and serviceability of the control. Circ or Non-Circ Systems. With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brands non-low flow system when you match it with any TP or SpaTouch topside panel. This system can also be used as 120v or 240v. This system can operate. Pump1 single or dual speed. Pump2 single or dual speed OR blower. Economy priced for basic spa pack replacement. Replaces the Wolfpac at a lower cost. COMPLETE GENUINE PRODUCT FROM BALBOA WG®. Made in USA, Brand new objects. Item is always subjected to daily inventory changing. In-case of back-order product, you will advise as soon as possible. Xpresspost 1-4 days, all trackables. Expedited parcel USA 4-8 days, with tracking#. Xpresspost USA 2-4days with tracking#. CanadaPost + your local Postal services. International surface/boat parcel 4-6 WEEKS, with tracking#. XpressPost International – EMS – 4-10 days, with tracking#. The item “BP501 Balboa water group complete spa pack RETROFIT KIT for 2pumps TP500 keypad” is in sale since Monday, August 29, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines et piscines thermales\Spas et bains à remous”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
I have here a spa Control Hot Tub Heater Controller Pack ACC SMTD1000. It was used less than a dozen times. Heater works great and is included along with the control panel and wiring. However there was a patch done to the control panel wiring that doesnt effect operation (pictured). There no longer is a wiring diagram on the metal plate cover and is is missing the screws that hold it. But easy to look up online and also to get screws. Works as it should and great for someone repairing their spa. The item “Spa Control Hot Tub Heater Controller Pack ACC SMTD1000 Large Keypad SPECIAL” is in sale since Friday, March 13, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jays2ktl” and is located in Potomac, Maryland. This item can be shipped to United States.
Spa Control Hot Tub Heater Controller Pack SMTD1000 Big Topside NEW 115/230v ACC – this one is new, complete, an open box manager’s special 1 only at this special price. This Smartouch Digital Control comes with 15″ high flow 2″ heater, Large 3.25×7.25 Topside display/keypad, power cords, and is a complete unit to replace your old spa control and heater. Drops into 2.5×6.5 cutout in your spa. Runs a main 2 speed spa pump, and an air blower, and spa light, and has an output for ozonator or ionizer or any other non-switched device. Intended use is to be mounted under the redwood skirt of a typical portable spa, not outside in the rain, snow, etc. Runs on 20 GPM minimum , 2″ or 1-1/2″ PVC pipe size. This is NOT a circ pump system for tiny 24/7 3/4 pumps. This is for conventional 2-speed pump and is a high flow heater and control system. Message us if you need a tiny circ pump controller, along with all your specs and details. This control above is NOT for low flow circ systems. Comes with a new power cord for your main 2-speed pump, with quick disconnect plug to the control. You also get quick disconnect plugs and short’pigtail’ cords for the air blower, spa light, and one accessory device, like an ozonator. These are short cords meant to splice to your existing light cord, blower cord, and ozonator cord, using the supplied wire nuts. Includes 15 inch long 5500 watt (5.5kw) stainless steel heater, can be used on 115v or 230 volts, it’s changeable voltage-wise. This is the common length of heater for 98% of hot tubs out there, comes with industry-standard black plastic split nuts with common buttress threads, so can couple right up to your existing plumbing if you have a 15 heater now. The Smartouch SMTD 1000 can run off your 4-wire 230 volt supply voltage or off of a 3-wire 115 volt household power. Also, the pump and blower voltages can be changed to either 115v or 230v. On a 115 volt source, the heater will be 1.4kw or 1375 watts. From the factory the SMTD1000 is set for 230v incoming power, 230v to the heater, and 115v to the pump, air blower (or second pump), and the ozonator, and 12 volts to the light, which is industry-standard. Or, you can change the voltages yourself, it is easy. Can be mounted in any direction or position, even upside down, and the water can flow either direction through the heater. Can be fitted to 1-1/2″ or 2″ PVC pipe size systems. Control is intended for use under the redwood skirt of a portable spa, not outside in the rain please note. This control is for 4-wire 230v or for 115v. IF you need a control for 3-wire 230v, an all 230v system, we can supply it, takes an extra day or so, message us and we’ll respond with price and leadtime. So message us if you want 3-wire, please. User’s Manual shows how to program changes into the control, but it is factory programmed, and tested by ACC, and ready to go as is. Control box stands 14-9/16″ tall, and 15-3/8″ wide, 7″ deep, heater is 15″ flange to flange. Designed, built and tested in the U. By ACC, a rugged, proven, spa control, good tech support, good parts availability, made in California. Not refurbished, rebuilt, demo, all is brand new in factory packaging, warranted and backed by Applied Computer Controls. ACC has been building digital hot tub controls over 30 years. Message us anytime for tech support, questions, or just general help, or we’re happy to call you if you want to chat. Smartouch Digital Control by ACC model SMTD1000. 15 stainless steel heater with standard threaded couplings. Large digital display keypad (topside) 3.25×7.25″ with 57″ long cable. Pump 4 wire power cord with quick disconnect AMP plug and motor connectors. Air Blower power cord, a short’pigtail’ with quick disconnect AMP plug, 18/3 wire size, to splice to existing blower cord. Ozonator cord, a short pigtail with quick disconnect AMP plug, 18 gauge wire. Light pigtail with quick disconnect AMP plug, 18 ga wire. ACC User’s Manual. Manual and Programming Guide can be viewed and printed on the ACC-Spas website. Be sure to add me to your favorites list. Check out my other items. The item “Spa Control Hot Tub Heater Controller Pack ACC SMTD1000 Large Keypad Special” is in sale since Wednesday, January 1, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “jewelryandgold” and is located in Southern, California. This item can be shipped to United States.
Gecko electronic & Spa Builders manufactured, Topside control keypads for spa/hot tub. Main TSC-9 keypad with single pump overlay. Compatible with most S-CLASS (SSPA-1 / SSPA-MP). & U-CLASS spa systems. & MSPA-2 spa pack. Dimension: small oval shape 4.45″ X 1.96″ (114mm X 51mm). 8-ft long wires with 8-pins plug. 3-digits red LED screen. PDC spas Plastic development company. Connected with 96 cord lenght, LED screen display & 8 pins ready-to-plug to spa pak. Dimension: 4.45″ x 1.96″ in. Xpresspost 1-3 days, all trackables. Xpresspost USA 2-4days with tracking#. CanadaPost + your local Postal services. The item “Spa hot tub Gecko TSC9 control keypad 4 buttons + overlay BDLTSC9PPD” is in sale since Friday, December 2, 2016. This item is in the category “Maison et jardin\Jardins et vie extérieure\Piscines et piscines thermales\Spas et bains à remous”. The seller is “sleco69″ and is located in Montreal-Nord, Quebec. This item can be shipped worldwide.
Comes with items displayed in pictures only in condition described and shown. Picture #2 shows topside with overlay decal for illustration purposes, but listing does not include decal overlay. The item “NEW GECKO K73 PUMP TOPSIDE CONTROL KEYPAD HYDROPOOL AQUASPORT SWIM SPA HOT TUBS” is in sale since Tuesday, May 13, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “generalpublicsales” and is located in Salt Lake City, Utah. This item can be shipped to United States.
NEW hot tub controller, with electric high flow heater, by Applied Computer Controls, ACC model’ePack’ SMTD1500, complete, with set of power cords (pigtails) for pump, air blower, light, and ozonator, for standard 4-wire 230 volt incoming power, or, for 115 volt, it is convertible for voltages, 15″ stainless steel high flow heater, 2″ pipe size couplings, standard threaded split nuts 4.0kw heater, see photos for dimensions. Temperature probes are built in to heater, so no external mess with extra wires, probes in the tub, etc. Main control box is 12″Tx15″Wx5D approximately. Includes the 3.25×7.25″ large BACKLIT XP-2020 topside, which requires cutout hole of 2.2×6.2″ hole. The ribbon cable from topside to control box is 5ft long. Model: ePack SMTD 1500. Display: Digital Topside Keypad 3.25 x 7.25. Heater: High Flow 2 15 inch 4kw. Dimensions: 11.5T x 14W x 4D. Voltage: 240V 4-wire standard. Convertible to 115V optional. Country of Manufacture: United States. Type: Pump, Air Blower OR second pump, and Light. Brand: Applied Computer Controls (ACC). Intended Use: For portable spas, mounted under redwood skirt. UPC: Does not apply. For repairing your spa, better and less costly than replacing parts on an old control, fits for most any spa or hot tub except for maybe some of the tiny 1 person tubs. Nice big clear display. Not refurbished, but all new! The ePack will run one main 2-speed pump. And an air blower on-off, OR, any other device on-off, for example a secondary single speed pump. And a 12 volt light, and it has output to an non-switched auxiliary device such as an ozonator, and of course it powers and controls the high flow heater included. Cord to main 2-speed pump is 48, the cords to light, ozonator, and air blower are short pigtails meant to splice onto your existing cords using wire nuts. Factory default settings are. Incoming power 230v 4-wire (can be 115v). High Flow Heater 230v (can be 115v). Main 2-speed pump 115v (can be 230v). Air Blower 115v (can be 230v) (or can be the on-off for a second pump). Ozonator 115v (can be 230v). Light 12 volts only. If you need to control more than this, look at the Model 2000, the SMTD2000 control we list here. Note: intended use is for mounting under the redwood skirt of a typical portable spa, not out in the rain, snow, etc. This is a high flow heater and control, 20 GPM minimum, for 2″ or 1-1/2″ PVC pipe size. It is NOT for tiny 3/4 circ pumps, if you need a low flow circ pump system, please message us. Warranties: all warranties are from the manufacturers who made the goods, not from the distributors, dealers, or resellers. Heater warranties do not cover running with air in the system (dry-fire) and burning a heating element, as this is not a defect. Pump warranties do not protect against seals being scratched by debris and leaking. Standard stuff, but just fyi, so you are aware. The item “Spa Control Hot Tub Heater ePack Controller Backlit XP-2020 Keypad ACC 4kw” is in sale since Wednesday, May 29, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spas & Hot Tubs”. The seller is “spapumpsandmore” and is located in Los Angeles, California. This item can be shipped to United States.
